Lithium battery LFP Smart 25.6V/100Ah-a (2.56KWh) NG

This battery uses Lithium Iron Phosphate (LiFePO₄ or LFP) technology, known for its safety, stability, and long lifespan.

The battery has a nominal voltage of 25.6 V and a capacity of 100 Ah, which corresponds to a nominal energy of 2.56 kWh (2560 Wh).

No, an external Battery Management System (BMS) is mandatory and must be purchased separately. The BMS automatically manages all essential battery parameters, such as voltage, current, and temperature.

This battery is compatible with Victron Energy Lithium NG series BMS units, including the Lynx Smart BMS NG 500 A/1000 A. Other NG BMS models are also compatible.

Battery monitoring and control are performed via the VictronConnect app (each BMS model is Bluetooth-equipped), a GX communication center, or the VRM portal. You can view real-time parameters such as cell status and voltages, current, and battery temperature.

Yes, these batteries can be connected in series, parallel, or series/parallel to create battery banks suitable for 12 V, 24 V, or 48 V system voltages.

For a 24V battery bank, you can connect a maximum of 50 NG Lithium batteries, allowing a maximum storage capacity of 384 kWh.

The battery weighs approximately 19 kg. Its dimensions are 235 mm (height) x 341 mm (width) x 160 mm (depth).

This battery has IP65 protection. This means it is fully dust-tight and protected against low-pressure water jets, making it suitable for marine environments or areas exposed to dust and moisture.

For discharge: operating temperature is -20 °C to +50 °C. For charge: operating temperature is +5 °C to +50 °C. Operation outside these ranges may severely damage the battery or reduce its lifespan.

The cycle life of this battery depends on the depth of discharge (DoD):

At 80 % DoD: approximately 2500 cycles.
At 70 % DoD: approximately 3000 cycles.
At 50 % DoD: approximately 5000 cycles.
These figures assume a remaining capacity of at least 80 % of the nominal capacity.

The maximum continuous discharge current is 100 A (1C). The maximum 10-second pulse discharge current is 200 A (2C).

The maximum continuous charge current is 100 A (1C). The maximum 10-second pulse charge current is 200 A (2C).

Yes, it is recommended to charge the battery before its first use. This step ensures that all cells are balanced and that the battery is ready to operate optimally from the start.

The battery firmware is automatically updated by the connected BMS (Battery Management System). This ensures the battery always has the latest improvements and features without manual intervention.

For optimal charging and to extend battery life, the recommended charging voltage is between 28 V and 28.8 V. The recommended float voltage is 27 V.

Yes, using an external Battery Management System (BMS) is mandatory for this battery. The BMS automatically manages all battery parameters, including system voltage, current, and temperature, and is essential for safety and performance. Models such as the Lynx Smart BMS NG 500 A/1000 A are compatible and must be purchased separately.

Battery installation is simplified thanks to the included mounting brackets. These brackets ensure optimal battery securing, protecting it against sliding and tipping. The battery can also be placed on its side, offering additional flexibility for arranging your space.

Yes, these NG lithium batteries can be connected in series, parallel, or a combination of both, to create battery banks suitable for 12V, 24V, or 48V systems. For 24V systems (for which this 25.6V battery is optimized), up to 50 batteries can be used, allowing a maximum storage capacity of 384 kWh.

The Smart 25.6V/100Ah-a NG lithium LFP battery has an IP65 protection rating. This means it is effectively protected against dust and can withstand low-pressure water jets, making it suitable for environments where exposure to dust and water is a concern, such as marine applications.