Pack Acu-Test FT058 RS422 — visuel officiel ; capteur, ordinateur et alimentation illustrés non inclus

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

FT Technologies

FT058

FT Technologies FT058 Acu-Test - RS422 Test Pack

The FT058 Acu-Test pack from FT Technologies allows testing and configuration of FT74X-D-SM (RS422) digital wind transducers in a laboratory or office. It facilitates functionality verification and parameter adjustment via the Acu-Vis software. The pack comes with the FT058 cable and FT Acu-Vis software.

Retail priceBenefit from the professional rate

QAR 1.199,25

Shipping calculated at checkout.

Import duties and taxes are payable by you on delivery.

Prices shown excluding VAT for Qatar. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Package contents	FT058 cable, FT Acu-Vis software
Computer Interface	USB
Manufacturer Reference	FT058
Sensor Interface	RS422
Sensor Supply	6-30

Detailed description

The Acu-Test FT058 pack from FT Technologies is designed to facilitate the testing and configuration of digital wind transducers in a laboratory or office environment. It allows verification of the functionality of FT74X-D-SM (RS422) wind transducers, including wind speed and direction, and modification of common parameters such as heater setpoint and averaging filters.

Pack Composition and Compatibility

The Acu-Test FT058 pack includes the FT058 cable and FT Acu-Vis software. Each cable is identified by a unique serial number and manufacturing date for traceability.

This pack is used to test FT74X-D-SM (RS422) wind transducers. The Acu-Vis software is compatible with Windows XP, Vista, 7, 8, 8.1, 10, and 11 operating systems.

Required Items Not Included

For full use of the Acu-Test FT058 pack, the following items are required and are not included:

A FT74X-D-SM (RS422) wind transducer.
A laboratory power supply from 6 to 30 VDC (2A minimum) or a FT062 power supply (24VDC).
A computer.

Usage Precautions

It is imperative to avoid connecting or disconnecting sensors or power while energized during operation, as well as any incorrect wiring of power leads. Such actions could damage the equipment and are not covered by FT Technologies's standard warranty conditions.

Documentation

Type	Nom
	- Acu-Test RS422 FT742-SM - 9000577 (EN)

Expert opinion

Pol CONIN

Digital Manager

« Validation and Configuration of FT74X-D-SM (RS422) Sensors »

The FT058 Acu-Test pack is a tool for the validation and configuration of FT74X-D-SM (RS422) digital wind transducers in a controlled environment. It allows technicians to verify sensor functionality, adjust parameters such as heater setpoint or averaging filters, and diagnose potential malfunctions before final on-site or embedded system integration.

It is used to verify sensor functionality and parameters, thereby contributing to data validation. It offers a dedicated platform for pre-deployment tests or post-maintenance checks, ensuring that the sensor operates according to required specifications. It is important to note that this pack is specifically designed for the RS422 interface of FT74X-D-SM sensors and must not be used with other interface types. Particular attention must be paid to the procedure for connecting and disconnecting power and sensors, which must imperatively be performed when power is off to avoid any material damage not covered by the warranty.

This pack is a diagnostic and configuration solution for FT Technologies RS422 sensors, providing a software and hardware interface for these products. It does not replace a field power supply or an onboard computer, but complements workshop or laboratory equipment.

Payment and security

Your payment information and data are processed securely.

FT Technologies FT058 Acu-Test - RS422 Test Pack

QAR 1.199,25

Frequently Asked Questions

Need help? Contact us

What is the purpose of the Acu-Test FT058 pack?

The Acu-Test FT058 pack is designed to facilitate the testing and configuration of digital wind transducers in a laboratory or office environment. It allows verification of the wind speed and direction functionality of a FT74X-D-SM (RS422) sensor and modification of certain common parameters such as heater setpoint and averaging filters.

What does the Acu-Test FT058 pack contain?

The Acu-Test FT058 pack includes the FT058 cable and FT Acu-Vis software.

What additional equipment is needed to use the Acu-Test FT058 pack?

To use the Acu-Test FT058 pack, you will also need the following items, which are not included in the pack:

A FT74X-D-SM (RS422) wind transducer. A power supply, either a laboratory power supply unit of 6-30 VDC (2A min.), or the FT062 power supply (24VDC). A computer.

With which wind transducers is the Acu-Test FT058 pack compatible?

The Acu-Test FT058 pack is designed for use with FT74X-D-SM (RS422) digital wind transducers.

What are the power supply requirements for the wind transducer used with the FT058?

The wind transducer must be powered by a laboratory power supply unit providing 6 to 30 VDC with a minimum of 2 amperes (2A min.), or by the FT062 power supply (24VDC).

What operating systems are supported by the Acu-Vis software?

The Acu-Vis software supports Windows XP, Vista, 7, 8, 8.1, 10, and 11 operating systems.

Are there any important precautions to take when connecting the power or the sensor?

Yes, it is important not to connect or disconnect power and/or sensors during operation. Live connection or disconnection, or incorrect wiring of power leads, could damage the equipment and is not covered by FT Technologies's standard warranty conditions.