Pack Acu-Test FT055 analogique 4-20 mA — visuel officiel ; capteur et ordinateur illustrés non inclus

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

FT Technologies

FT055

FT Technologies Acu-Test FT055 Pack - 4-20 mA analog sensor

The Acu-Test FT055 pack from FT Technologies is a dedicated solution for diagnosing and configuring FT wind sensors with analog output 4-20mA. It allows checking sensor functionality and adjusting its parameters via the Acu-Vis software.

The pack includes the FT055 cable and the FT Acu-Vis software.

Retail priceBenefit from the professional rate

QAR 1.164,00

Shipping calculated at checkout.

Import duties and taxes are payable by you on delivery.

Prices shown excluding VAT for Qatar. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Package contents	FT055 Cable and FT Acu-Vis Software
Manufacturer Reference	FT055
Sensor Interface	4-20 mA
Software	FT Acu-Vis

Detailed description

The Acu-Test Pack (Analog 4-20mA) FT055 from FT Technologies is designed to test, evaluate, and modify the settings of analog output FT wind sensors. It allows interfacing sensors with a computer for diagnostics and configuration.

Pack contents and compatibility

This pack includes the FT055 cable and the FT Acu-Vis software. The FT055 test cable supports the following wind sensors:

FT702LT/D Wind Sensors (4-20mA) versions V20 and V22
FT722-A and FT742-A Sensors (FF, PM, DM, and DM50 variants) 4-20mA

Each cable is identified by a unique serial number and manufacturing date to ensure traceability.

Required items not included

To use the Acu-Test FT055 pack, the following equipment is required and not included:

An analog output FT wind sensor.
A power supply: a laboratory power supply of 12-30 VDC (current limit up to 4A), or the FT062 power supply (24 VDC) which requires a regional C13 mains power cord.
A multimeter (ammeter, voltmeter, or oscilloscope) to measure sensor current loops, OR a compatible computer.

Acu-Vis Software features

The Acu-Vis software, compatible with Windows XP, Vista, 7, 8, 8.1, 10, and 11, provides a means to test the wind speed and direction functionality of analog FT sensors. It also allows modifying settings related to heating, filters, and direction offsets.

Installation considerations

Any connection or disconnection of sensors or power during operation, or incorrect wiring of power leads, may damage the equipment and is not covered by FT Technologies's standard warranty conditions.

Documentation

Type	Nom
	- Acu-Test Analog 4-20 mA - 9001849 (EN)

Expert opinion

Pol CONIN

Digital Manager

« Diagnosis and configuration of FT 4-20mA analog wind sensors »

The Acu-Test FT055 pack is a relevant diagnostic tool for integrators and technicians working with FT Technologies's range of 4-20mA analog wind sensors. Its value lies in its ability to provide a direct interface for functional verification and precise adjustment of sensors.

This pack is useful for the initial commissioning of sensors, allowing confirmation of correct wind speed and direction data readings. It is also important for on-site or workshop troubleshooting, as it facilitates rapid identification of sensor or wiring issues. Access to heating, filter, and direction offset settings via the Acu-Vis software is a key technical feature, enabling optimization of sensor performance according to specific environmental conditions.

It is crucial to note that the FT055 is specifically designed for sensors with analog output 4-20mA. It should not be confused or used with sensors with digital interfaces. Integration requires a stable external power supply of 12-30 VDC and measuring equipment (multimeter) or a computer with Acu-Vis software. Particular attention must be paid to wiring and connection/disconnection procedures to avoid damaging the equipment, as stipulated by the manufacturer.

Payment and security

Your payment information and data are processed securely.

FT Technologies Acu-Test FT055 Pack - 4-20 mA analog sensor

QAR 1.164,00

Frequently Asked Questions

Need help? Contact us

What is the main purpose of the Acu-Test FT055 pack?

The Acu-Test FT055 pack is designed to facilitate the testing, evaluation, and modification of settings for FT wind sensors with analog output. It allows verifying wind speed and direction functionality, as well as changing parameters related to heating, filters, and direction offsets.

What items are included in the Acu-Test FT055 pack?

The Acu-Test FT055 pack includes the FT055 cable and the FT Acu-Vis software. Each cable is labeled with a unique serial number and manufacturing date to ensure quality and traceability.

Which analog wind sensors are compatible with the Acu-Test FT055 pack?

The FT055 test cable is compatible with the following wind sensors:

FT702LT/D wind sensors (4-20mA) (versions V20 and V22). 4-20mA FT722-A and FT742-A sensors (FF, PM, DM, and DM50 variants).

What additional equipment is needed to use the Acu-Test FT055 pack?

To use the Acu-Test FT055 pack, you will also need the following items, which are not included:

A sensor from the FT range of analog output wind sensors. A power supply. A multimeter (ammeter, voltmeter, or oscilloscope) or a computer.

What are the power supply requirements for the Acu-Test FT055 pack?

The Acu-Test FT055 pack requires a power supply of the following type:

A laboratory power supply of 12-30 VDC (with a current limit up to 4A). The FT062 power supply (24 VDC), which requires a regional C13-style AC power cable.

What Windows operating systems are supported by the Acu-Vis software?

The Acu-Vis software supports the following Windows operating systems: XP, Vista, 7, 8, 8.1, 10, and 11.

What precautions should I take when connecting cables to avoid damaging the equipment?

It is important not to connect or disconnect power and/or sensors during operation. Incorrect wiring of power leads could also damage the equipment. These situations are not covered by FT Technologies's standard warranty conditions.