FT Technologies FT009 - 1,5 m connection cable for FT74X-SM

The FT009 cable from FT Technologies is a 1,5-meter connection solution for FT74X-SM wind sensors. It features an 8-pin connector (6 active) on the sensor side and bare wires for custom integration. This 8-conductor 24 AWG cable is designed to operate between -40 and +80 °C, supporting up to 30 VDC / 2 A.

Retail priceBenefit from the professional rate

QAR 573,11

Shipping calculated at checkout.

Import duties and taxes are payable by you on delivery.

Prices shown excluding VAT for Qatar. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Cable Bend Radius Mm	70
Cable Diameter	7
Cable length	1.5
Compatible Sensor Model	FT74X-SM
Number of conductors	8 (6 used)
Connector Type Other End	Bare wires
Connector Type Sensor Side	8-pin connector
Individual Wire Gauge Awg	24
Manufacturer Reference	FT009
Operating temperature range	-40 to +80
Rated Current	2
Rated Voltage	30
Weight	0.1

Detailed description

The FT009 cable from FT Technologies is a 1,5-meter connection solution specifically designed for FT74X-SM wind sensors.

Technical Specifications

This cable consists of 8 conductors of 24 AWG gauge. The entire cable has an outer diameter of 7 mm. It is designed to support power up to 30 VDC and a current of 2 A. Its operating temperature range extends from -40 to +80 °C, and its minimum bend radius is 70 mm. With a weight of 0,1 kg, it complies with the RoHS2 directive (2011/65/EU).

Connectivity and Cabling

The FT009 cable is equipped with an 8-pin connector (of which 6 are active) on the FT74X-SM sensor side, and bare wires at the other end for custom termination.

Pins 7 and 8 are not connected.

Documentation

Type	Nom
	- 1.5 m cable - 9000579 REV A01 (EN)

Expert opinion

« Technical Analysis of the FT009 Cable for FT74X-SM Sensors »

The FT009 cable is designed as the connection interface for FT74X-SM wind sensors. Its 1,5-meter length makes it suitable for installations where the sensor is positioned in close proximity to the connection point, such as a junction box or data processing equipment.

With an 8-pin connector (of which 6 are active) on the sensor side and bare wires at the other end, this cable requires cabling expertise for proper integration. The installer must refer to the provided pinout to ensure correct configuration of RS422 or RS485 signals, depending on the communication mode of the FT74X-SM sensor used. This free-wire design offers flexibility for custom terminations in various marine or industrial electronic systems. The minimum bend radius of 70 mm must be observed during routing to preserve conductor integrity.