Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 25%

B&G

000-0119-79

NMEA 2000 T-connector

Easily add new equipment to your network with this B&G NMEA 2000 T-connector. Designed to the Micro-C standard, it integrates seamlessly into any NMEA 2000 backbone for reliable data transmission between your devices. Includes: 1x NMEA 2000 T-connector.

Retail priceBenefit from the professional rate

$21.00 USD

$21.00 USD ~~$28.00 USD~~

Shipping calculated at checkout.

Low stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Connector type	Micro-C
Compatible network	NMEA 2000
Wired network	NMEA 2000
Operating temperature	-25 to +70
Storage temperature	-40 to +85
IP rating	IP67
Certifications	NMEA 2000,CE
Product type	Network Connector
Mounting type	Online
IP rating	Waterproof

Detailed description

The B&G NMEA 2000 T-Connector from the Navico group is the essential component for extending or designing your navigation network. Designed to integrate perfectly with an existing NMEA 2000 backbone, it allows the connection of new electronic equipment such as a sensor, a display, or a GPS antenna. This standardized connector ensures reliable data transmission between your various marine devices.

Compatibility and network integration

Thanks to its Micro-C standard design, this T-connector is universally compatible with all NMEA 2000 networks. Although distributed by Navico (B&G, Simrad, Lowrance), it integrates seamlessly with equipment from other certified brands such as Garmin or Raymarine. Unlike older proprietary networks, this standardization ensures a scalable and robust network architecture, greatly facilitating installation without the need for specific tools.

Reliability in marine environments

This component is built to withstand the most demanding marine conditions. Its contacts ensure optimal conductivity to prevent any signal loss or voltage drop on the NMEA 2000 network. The waterproof connections, once locked, protect the system against moisture and corrosion, thus ensuring the longevity of your onboard electronic installation.

Expert opinion

Pol CONIN

Digital Manager

« The essential central element for a reliable NMEA 2000 backbone »

The NMEA 2000 T-connector is the fundamental building block of any modern marine electronics installation. This B&G model strictly adheres to the Micro-C standard, offering a clean and secure connection for the vessel's backbone. During our installations, we favor these official connectors to avoid network micro-interruptions often encountered with non-certified components. This connector ensures perfect signal and power continuity, guaranteeing the stability of critical data (AIS, GPS, wind) between the various onboard displays and sensors, regardless of the brand of connected equipment.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

NMEA 2000 T-connector

$21.00 USD

$21.00 USD ~~$28.00 USD~~

Frequently Asked Questions

Need help? Contact us

What is a NMEA 2000 T-connector?

A NMEA 2000 T-connector is an essential component of a NMEA 2000 network. It allows you to connect an additional device (such as a sensor, instrument, or chartplotter) to the main network backbone. It serves as a junction point to easily add devices to the network.

What types of devices can I use this NMEA 2000 T-connector with?

This NMEA 2000 T-connector can be used with a wide variety of NMEA 2000 compatible devices, such as multi-function displays, depth sensors, speed sensors, wind instruments, GPS units, autopilots, and VHF radios.

Is this NMEA 2000 T-connector compatible with devices from brands other than B&G?

Yes, the NMEA 2000 T-connector is compatible with all NMEA 2000 certified devices, regardless of their brand. The NMEA 2000 standard ensures interoperability between different manufacturers, such as Garmin, Raymarine, Simrad, and Lowrance.

Is the NMEA 2000 T-connector waterproof?

Yes, the NMEA 2000 T-connector is designed to be waterproof once properly connected. This protects the connections from moisture and corrosion, ensuring a reliable connection in a marine environment.

How do I install a NMEA 2000 T-connector?

Installing a NMEA 2000 T-connector is straightforward. Simply connect it to the existing NMEA 2000 backbone and plug in the device you wish to add to the network. Ensure the connectors are securely clicked into place to guarantee a waterproof and reliable connection.

Do I need any special tools to install this T-connector?

No, you generally do not need any special tools to install a NMEA 2000 T-connector. The connectors are designed to be plugged and unplugged by hand. Just ensure the connections are tight.

Where can I use this NMEA 2000 T-connector on my boat?

You can use this NMEA 2000 T-connector anywhere you need to add a device to your NMEA 2000 network, whether it's near your chart table, in the cockpit, or close to your sensors.

Is this T-connector compatible with a NMEA 0183 network?

No, this connector is only compatible with NMEA 2000 networks. NMEA 0183 is a different and incompatible standard. You will need a converter to connect NMEA 0183 devices to an NMEA 2000 network.

Can I use multiple T-connectors on the same NMEA 2000 backbone?

Yes, you can use multiple T-connectors on the same NMEA 2000 backbone to connect multiple devices. However, it is important to follow the manufacturer's recommendations regarding the total backbone length and the maximum number of connected devices.

Can this NMEA 2000 T-connector be used to power a device?

No, the NMEA 2000 T-connector is only for data transmission. Device power must be supplied by a separate connection.

How can I check if the NMEA 2000 T-connector is installed correctly?

Once the connector is installed, verify that the connected device is recognized by the NMEA 2000 network and that data is transmitted correctly. You can use an NMEA 2000 display or diagnostic software to check proper operation.

What is the difference between an NMEA 2000 T-connector and an NMEA 2000 straight cable?

An NMEA 2000 T-connector allows for a junction to connect an additional device to the backbone, while an NMEA 2000 straight cable is simply used to extend the backbone or connect two devices directly to each other.

Is this NMEA 2000 T-connector UV resistant?

Yes, the NMEA 2000 T-connector is manufactured with UV-resistant materials for increased durability in marine environments exposed to the sun.

Is the NMEA 2000 T-connector easy to disconnect if I need to rearrange my network?

Yes, the NMEA 2000 T-connector is designed to be easily disconnected if you need to rearrange your network or replace a device. Simply unclip the connector.

Is this NMEA 2000 T-connector compatible with all types of NMEA 2000 cables?

The NMEA 2000 T-connector is designed to be compatible with standard NMEA 2000 Micro-C type cables. Ensure you use cables that comply with NMEA 2000 specifications.

Can I use this NMEA 2000 T-connector to create a new NMEA 2000 backbone?

Yes, you can use this NMEA 2000 T-connector to create a new NMEA 2000 backbone by combining it with other T-connectors, backbone cables, and terminators.