CableClam 0.68" Cable Gland

The BLUE SEA 0.68" CableClam is a watertight cable gland designed for cable management and protection. It secures cable penetrations through decks or bulkheads, maintaining the integrity of the marine environment against water ingress.

The CableClam 0.68" is designed for cables with a diameter not exceeding 0.625 inches, which is approximately 15.88 mm.

BLUE SEA CableClam cable glands are typically made from durable plastics, resistant to UV rays and marine environments, ensuring long-term durability in harsh outdoor conditions.

Yes, the CableClam 0.68" is specifically designed for the marine environment. It is made with materials resistant to saltwater and ultraviolet (UV) rays to ensure long life and reliable performance.

The overall dimensions of the CableClam 0.68" are as follows:

- Length: 47.05 mm (1.85 in)

- Width: 19.98 mm (0.79 in)

- Total height: 16.51 mm (0.65 in)

The CableClam 0.68" is generally sold individually.

The primary function of the CableClam 0.68" is to provide a watertight and secure cable penetration through a deck or bulkhead. It protects cables and prevents water ingress into the boat's interior spaces.

Installing the CableClam 0.68" follows several steps:

- Drill the supplied gasket with a bit the same size as the cable, keeping the area wet during drilling.

- Use a fine-blade knife to split the gasket from its edge to the central hole.

- Attach the deck ring and gasket to the mounting surface.

- Slide the compression ring onto the cable and insert the cable through the gasket slit.

- Press the gasket into the compression ring.

- Screw the compression ring onto the deck ring, tightening each screw progressively. Do not overtighten the screws.

The CableClam 0.68" is mounted using #6 screws. These screws are not usually included with the product.

The spacing between the mounting holes on the CableClam 0.68" is 21.31 mm (0.84 in).

Yes, it is essential to drill the gland with a drill bit of the same size as the cable before inserting it. It is recommended to keep the hole wet during drilling.

To prepare the seal, first drill it with a bit the same size as the cable. Then, use a sharp knife to slit the seal from its edge to the central hole, which will make inserting the cable easier.

The CableClam system is designed to create reliable sealing by compressing the gasket around the cable. The installation instructions do not mention the use of additional sealing product for the gasket itself. However, it is always recommended to ensure the mounting surface is clean and flat for optimal base sealing.

Yes, the installation instructions for the CableClam 0.68" are designed to be straightforward and do not require specialized skills. By carefully following the provided steps, installation can be completed by a non-professional.

Yes, it can be used for cables with a diameter smaller than 0.625 inches. Waterproofing is ensured by drilling the supplied grommet to a diameter matching that of the cable you wish to pass through, then compressing it during assembly.

Yes, the CableClam 0.68" is specifically designed to secure cable penetrations through decks or bulkheads, providing a watertight solution for cable routing in these areas.

The CableClam 0.68" is covered by the legal warranty of conformity and the commercial warranties provided by the manufacturer, BLUE SEA SYSTEMS, against manufacturing and material defects.

The CableClam 0.68" warranty typically covers manufacturing defects and hidden material flaws. It ensures the product conforms to its description and is fit for its intended use under normal operating conditions.

Installing the CableClam 0.68" follows these steps:

- Drill the gasket with a sharp bit the same size as the cable, keeping the hole wet during drilling. The hole will be slightly smaller than the cable.

- Use a sharp knife to slit the gasket from its edge to the center hole.

- Secure the deck ring and gasket to the surface.

- Slide the compression ring onto the cable. Insert the cable through the gasket slit. Press the gasket into the compression ring.

- Screw the compression ring to the deck ring, tightening each screw a few turns at a time. Do not overtighten the screws.

Installing the CableClam 0.68" cable gland from BLUE SEA is a straightforward process that ensures watertight protection for your cables. Follow these steps:

- Preparing the gasket: Drill the gasket using a sharp drill bit with the same diameter as the cable. Keep the drilling area wet during the process. The resulting hole will be slightly smaller than the cable diameter.

- Slitting the gasket: Using a sharp knife, slit the gasket from its outer edge to the center hole you just drilled.

- Mounting the base: Secure the deck ring and gasket to the mounting surface (deck or bulkhead).

- Inserting the cable: Slide the compression ring onto the cable. Then, feed the cable through the slit in the gasket. Firmly press the gasket into the compression ring.

- Final assembly: Screw the compression ring into the deck ring. Tighten each screw gradually, a few turns at a time, to ensure even pressure distribution. Do not overtighten the screws.

This procedure ensures a secure installation and reliable watertight sealing for your cable penetrations.