Anode for ePropulsion Pod Drive 3.0 Evo folding propeller, sold individually

A sacrificial anode is a metal component designed to protect other metals on a boat from galvanic corrosion. In a marine environment, different metals in contact with water can create an electric current, causing corrosion of the less noble metal. The anode, being made of a more reactive metal (such as aluminum here), corrodes instead of more expensive and essential components of your engine, such as the propeller or engine block.

The net weight of this anode is 0.03 kg. Its low weight ensures it does not affect the balance or performance of the propeller on which it is installed.

Yes, this anode for the Pod Drive 3.0 Evo folding propeller is sold individually. You can order the exact number of anodes you need for your equipment.

The primary role of this anode is to protect the metal components of the Pod Drive 3.0 Evo folding propeller against galvanic corrosion and electrolysis. By corroding instead of the propeller metals, it significantly extends service life and maintains the structural integrity of your propulsion system.

A worn anode typically shows a surface that is eroded, corroded, or a significant reduction in size compared to a new anode. It may have a rough, granular, or irregular appearance. An anode that shows no signs of wear after a period of use in saltwater may indicate a connection issue or insufficient protection.

This anode is an ePropulsion product, designed specifically for their marine propulsion systems.

No, this anode (reference P3-LU02-E0) is specifically designed for the folding propeller of the Pod Drive 3.0 Evo engine. Its fit and effectiveness are not guaranteed on other Pod Drive engine models, which may require an anode of different dimensions or composition.

No, this anode is specifically designed for the folding propeller of the Pod Drive 3.0 Evo engine. It is not suitable for non-folding propellers, which may have different requirements in terms of shape, size, or mounting for their anodes.

Periodic inspection of the anode is recommended, ideally at each haul-out or during regular boat maintenance. The exact frequency may vary depending on engine usage intensity and water conditions (salinity, presence of stray electrical currents).

Installing a sacrificial anode is usually a simple maintenance task, but it requires easy access to the propeller and adherence to the engine manufacturer’s instructions. It is recommended to consult your Pod Drive 3.0 Evo engine user manual for the specific replacement steps.

Replacing the anode usually requires basic tools such as a wrench or screwdriver, depending on the type of fastener. It is advisable to check your Pod Drive 3.0 Evo engine manual for the exact tools required and replacement procedures.

This anode ensures protection for your propeller by acting as a "sacrificial" component. Made from a more reactive metal (aluminum) than the components of your propeller, it attracts and absorbs galvanic corrosion. Thus, the anode degrades instead of the propeller metals, preserving their integrity and extending their lifespan.

If a worn anode is not replaced, the metal components of your propeller and your Pod Drive 3.0 Evo will become targets for galvanic corrosion. This will lead to gradual degradation of these critical parts, potentially causing costly damage, reduced performance, or even premature failure of the propulsion system. Regular replacement is therefore essential for the longevity and reliability of your equipment.

The anode is sold individually. Specific fasteners, such as screws or nuts, are typically designed to be reused or are supplied with the original motor/propeller assembly. It is recommended to check your Pod Drive 3.0 Evo manual to confirm whether fasteners are required and if they need replacement.