Dual Evo control with screen for ePropulsion bimotor Navy Evo, Pod Drive Evo or Spirit 1.0 Evo

The Evo dual control with ePropulsion display is designed to simultaneously operate two motors from the Evo series, such as the Spirit Evo, Navy Evo and Pod Drive Evo models. It provides precise control of electric propulsion and serves as an alternative to a tiller.

The main control unit measures 151.8 x 178 x 159.4 mm. The standalone 4.3-inch display measures 138.5 x 106.9 x 42.5 mm.

The total weight of the Evo dual control unit, including the display panel, is 2.6 kg (5.7 lbs).

Yes, the system includes a magnetic circuit breaker for emergency stop of ePropulsion electric outboards. Two circuit breakers are provided in the package.

The Dock Mode is a function that, when activated by pressing the DOCK button, limits the motors' power to 50%. The DOCK button light illuminates to indicate that the mode is active.

In Sync mode, both motors are controlled simultaneously. By default, they are controlled by the right throttle handle. A long press on the SYNC button allows you to switch control between the right and left throttle handles.

The packaging includes:

1 Evo double control unit set (main unit)
1 Evo display
1 user manual set, warranty card and invitation card
2 circuit breakers
1 0.5m communication cable

This dual control is compatible with twin-engine motors in the Evo series, including Spirit Evo, Navy Evo, and Pod Drive Evo models.

This is a wired communication system, ensuring a stable connection between the control unit and the motors.

The maximum communication distance for the wired connection is 15 meters.

The Evo dual control is specifically designed to simultaneously operate two motors (twin-engine) from the Evo series. Its features and interface are optimized for this configuration.

To configure battery settings:

In power mode, press and hold the Menu button to access settings. Select "Battery Setting". Choose the battery type (Li-ion, LiFePO4 or Lead-acid). Set the battery capacity (range 1 to 9999 Ah). Adjust the nominal voltage (range 30.0 to 99.9 V). Enable or disable the hydrogen generation function (ON/OFF). Set the battery low-voltage threshold (range 30.0 to 99.9 V).

To adjust display units:

In operating mode, press and hold the Menu button to access settings. Select "Unit Setting". Choose the battery display mode (power or voltage). Select the desired distance unit (NM for nautical mile, MILE for statute mile, or KM for kilometer). Select the desired speed unit (MPH for miles per hour, or KM/H for kilometers per hour).

To set the power limit in Harbour mode:

In running mode, press and hold the Menu button to access settings. Select "Dock Power Limit". Use the selector button to choose the power limit for forward (« Forward Limit ») and reverse (« Backward Limit ») thrust. The power can be limited between 1% and 50%.

If the kill switch is not removed after engine shutdown (when the battery is connected), this will result in continuous battery power drain.

ePropulsion may refuse a warranty claim if:

Any improper operation contradicts what is written in the user manual. The product label is not intact or the serial number is not registered.

To maintain the validity of your warranty, you must:

Keep the product label intact and record the serial number on it. Strictly follow all instructions and usage procedures described in the provided user manual.