H5000 csatlakozócsomag központi egységhez

This kit (reference 000-12894-001) provides all the plugs and terminals required to connect the H5000 central processing unit. It includes connectors for the NMEA 2000 network, the Ethernet network, the mini-USB port, the power supply, the analog inputs for external sensors, and the digital output for alarms.

No, this pack is exclusively compatible with the standard H5000 central processing unit. For the H5000 autopilot processor, a different kit with reference 000-12895-001 must be used.

The power connectors in this pack are designed to handle a nominal voltage of 12 V DC (with an acceptable operating range of 9 to 16 V).

The Ethernet connector enables a high-speed network connection. It is essential for the rapid transfer of navigation data and to access the web server integrated into the H5000 processor to perform system configuration.

The mini-USB connection is primarily used for technical maintenance operations and installing software updates on the central unit.

Yes, data cables must not be routed in the immediate vicinity of a radar, a radio transmitter or large power cables to avoid electromagnetic interference. Also avoid sharp bends.

No, this connector kit was specifically molded and designed to interface with the ports of the B&G H5000 central processing unit. It does not match the connectors of Zeus or Triton displays.

Yes, the kit includes the necessary terminals to wire the digital output of the central unit, allowing external alarm modules to be triggered if needed.

Absolutely. If the cables of your sensors are shortened, lengthened or re-terminated to fit these connectors, you must absolutely insulate and protect all electrical connections to maintain the reliability of the marine system.

Once correctly installed on the H5000 central processing unit, the assembly provides IPX4 environmental protection, ensuring resistance to water splashes from any direction.

It is recommended to use plastic cable ties (zip ties) to attach and secure all cables. This prevents mechanical tension from being applied to the connectors due to the boat's vibrations.

Yes, it includes the specific datasheet for connecting the H5000 central processing unit to your Micro-C NMEA 2000 backbone, enabling communication with other onboard instruments.

Yes, when installing the H5000 CPU, it is essential to leave sufficient space at the rear to connect and disconnect the connectors without excessively bending the cables.

No, this is only a set of cards and terminals (the connectors that plug into the processor). It does not include the long cables (network, sensors) themselves.

To avoid any magnetic interference, the central unit and its connected cables must be installed at a minimum safe distance of 0.3 metres (1 foot) from any magnetic compass.

The H5000 central unit ports use specific terminal blocks and connectors to ensure data sealing and security. This pack is therefore essential to correctly connect your power supply, network, and sensors.