Triton² sebesség/mélység/szél kábeles csomag

This complete kit includes all the necessary components for a basic installation on a NMEA 2000 network. It contains:

A Triton² instrument displayA wired WS310 wind transducer with its interfaceA 20-meter mast cable for the wind transducerA DST810 through-hull transducer (Speed/Depth/Temperature)A NMEA 2000 starter kit including a power cable, 2 T-connectors, and 2 terminators.

Yes, the Triton² display screen is designed for optimal visibility even in full sunlight. It uses optical bonding technology to eliminate condensation and a transflective LCD panel that ensures excellent clarity at wide viewing angles and in high brightness.

The pack includes a mast cable 20 metres long to connect the WS310 wired wind sensor to its interface on the NMEA 2000 network.

Yes, this pack is entirely designed around the NMEA 2000 network. All components (display, sensors) connect and communicate via this standard, enabling easy integration into an existing network or the creation of a new system.

Yes, the Triton² display can show AIS targets transmitted over the NMEA 2000 network. This requires, of course, that your boat is equipped with an AIS receiver or transponder connected to the same network.

Yes, the Triton² display can function as a control unit for a B&G autopilot. However, for full control, it must be supplemented by a dedicated Triton² autopilot keypad.

The Triton² display is powered directly from the NMEA 2000 network. It does not require a separate power cable. Power and data are transmitted via a single Micro-C cable connected to the network backbone.

SailSteer is an exclusive B&G display page that centralizes all essential navigation data for sailboats on a single screen. It graphically and intuitively groups heading, speed, wind (true and apparent), laylines, and waypoint data.

Yes, the Triton² display is highly flexible. It offers preconfigured pages for quick access to key information, but you can also create your own custom pages by selecting the data you want to display and its layout (numeric, analog, histogram, etc.).

Yes, the NMEA 2000 starter kit (power cable, 2 terminations, 3 T-connectors) is designed to create a small backbone network to connect the Triton² display and the wind sensor interface. The DST810 transducer also connects to this network.

Yes, absolutely. The Triton² pack is fully NMEA 2000 certified, a universal standard in the marine electronics industry. It can therefore integrate and communicate seamlessly with other brands' equipment also NMEA 2000 certified.

The Triton² display has a 4.1-inch (approximately 10.4 cm) diagonal color screen with a 4:3 aspect ratio. Its resolution is 320 x 240 pixels, providing clear and detailed display of information.

The DST810 transducer features a modern and simplified calibration method. Speed, depth, and temperature sensor calibration can be performed wirelessly via Bluetooth directly from a smartphone or tablet using the Airmar Cast app.

Choosing a wired wind sensor like the WS310 prioritizes maximum reliability. The cable connection ensures stable data transmission without interference, as well as constant power supply, which is often preferred by sailors for critical wind data.

Yes, the DST810 transducer included in this pack is a "through-hull" model, meaning it must be installed by drilling through the boat's hull (hull penetration) to be in direct contact with the water and perform its measurements.