Közép méretű csatlakozó sín 35,5–42,5 mm, 650 A, 8–10 mm-es biztosítékhordozóhoz

The BEP 779-LB-2-B busbar is an electrical component designed to optimize connections in marine installations. It enables the creation of robust and organized links between fuse holders or other compatible electrical elements, forming an integral part of BEP's Pro Installer system.

This link bar is made with tinned copper conductors CDA102, known for their conductivity and corrosion resistance. The base is made of fiber-reinforced material, resistant to high temperatures, and the studs, washers and nuts are made of stainless steel to prevent seizing and improve longevity.

The BEP 779-LB-2-B busbar can handle a continuous current of 650 amperes (650A).

It is designed to operate at a maximum voltage of 50V DC.

Yes, it is equipped with transparent protective covers. These covers have removable side skirts, providing isolation on three sides and flexibility for cable entry.

Yes, its design is part of the BEP Pro Installer system's modularity, ensuring a common interconnection height for easier integration with other BEP products in the same range.

Yes, it is designed for durability in marine environments. The tinned copper conductors (CDA102) and the bolts, washers, and nuts in stainless steel contribute to its high corrosion resistance.

The primary function of this busbar is to provide a structured and robust solution for interconnecting electrical components, such as fuse holders, in high-power circuits, offering an organized alternative to conventional jumper cables.

This tie rod is specifically designed to accept pins with a diameter of 8 to 10 mm.

Yes, it is compatible with 12V, 24V, and 48V systems, as it can handle a continuous current of 650A at a maximum voltage of 50V DC, making it suitable for these common voltages.

It is designed to integrate with the BEP Pro Installer system, ensuring a common interconnection height with other products in this range. It is specifically sized to connect fuse holders or other compatible electrical components.

This link bar is specifically sized to connect components with a spacing of 35.5 to 42.5 mm.

Yes, it provides a structured and robust solution for high-power circuits, serving as an alternative to conventional connection cables while improving the organization and reliability of connections.

The transparent protective covers are equipped with removable side skirts. This design allows flexibility for cable entry from different angles while ensuring effective isolation on three sides.

Yes, the link bar is designed to connect components with a precise spacing of 35.5 to 42.5 mm. It is essential to ensure that the components to be connected comply with this spacing range for correct and secure installation.

Yes, thanks to its modular design and common interconnection height with other BEP Pro Installer products, it is designed for easy and orderly integration into existing electrical panels or systems.

The studs, washers, and nuts are made of stainless steel to prevent seizing. It is recommended to use appropriate tools and to tighten to the torque specified by the manufacturer to ensure a secure and durable electrical connection without damaging the components.

The interconnect bar is supplied with transparent protective covers that provide insulation on three sides. It is crucial to ensure these covers are properly installed and closed after all connections are made to guarantee optimal insulation and the safety of the installation.

No, the link bar is designed for a specific spacing of 35.5 to 42.5 mm and must not be cut or modified. Any alteration could compromise its structural integrity, current capacity, safety, and void any compliance.

Yes, the base of the tie bar is made of reinforced fiber, a material known for its resistance to high temperatures, making it suitable for environments where heat can be a factor.