MEGA AMG 100–300 A olvadóbiztosító-foglalat fedéllel

A MEGA AMG fuse holder is an electrical protection device designed to accommodate MEGA or AMG type fuses. It is used to protect high-current circuits (between 100A and 300A) against overloads and short circuits, particularly in marine applications for equipment such as windlasses, bow thrusters, inverters, or main battery circuits.

This fuse holder is designed to accommodate MEGA or AMG type fuses with an ampere range from 100 amperes to 300 amperes. The choice of the specific fuse will depend on the application and the nominal current of the circuit to be protected.

Yes, the BLUE SEA MEGA AMG fuse holder (part number 5001-BSS) is supplied with a cover. This cover provides additional protection against water spray, dust, and accidental contact, enhancing safety in the marine environment.

No, MEGA or AMG type fuses are not included with the BLUE SEA 5001-BSS fuse holder. They must be purchased separately, based on the specific amperage required for your application.

MEGA AMG fuse holders are ideal for high-current marine applications as they provide reliable and compact protection. Their robust design and cover make them suitable for harsh environments, protecting equipment such as windlasses, bow thrusters, or inverters.

This BLUE SEA MEGA AMG fuse holder is generally designed for 32V DC systems, making it compatible with most 12V and 24V marine electrical installations.

The model number of this fuse block is 5001-BSS. This is the specific product reference from BLUE SEA SYSTEMS.

Yes, this fuse holder is designed by BLUE SEA SYSTEMS, a brand specializing in marine equipment. Its robust construction and inclusion of a cover make it resistant to the harsh conditions of wet and salty environments.

This fuse holder is typically made from corrosion-resistant, robust materials such as reinforced plastic for the body and tinned copper studs for the connections, ensuring good conductivity and durability in a marine environment.

MEGA and AMG fuses are bolt-on fuse types designed for high currents. They often share the same physical dimensions and electrical characteristics, allowing this fuse holder to be compatible with both types. The designation may vary depending on the fuse manufacturer.

For installation, you will need:

An appropriate wrench or socket to tighten the stud nuts (usually M8). A crimping tool for cable lugs. A screwdriver or drill to secure the fuse holder.

Electrical cables must be fitted with appropriate ring terminals for M8 studs (5/16"). Connect the power cable (positive) to one stud, place the MEGA/AMG fuse across both studs, then connect the load cable to the other stud. Tighten the nuts to the recommended torque.

Yes, this fuse holder can generally be installed in any orientation (horizontal, vertical, etc.), provided it is securely fastened and the connections are accessible for fuse maintenance and replacement.

Yes, this fuse holder is fully compatible with marine electrical systems operating on 12V DC or 24V DC, as its maximum rated voltage is typically 32V DC.

Yes, this fuse holder is perfectly suited for protecting high-power equipment such as inverters, battery chargers, or bow thrusters, provided you select a MEGA/AMG fuse with an amperage matching the equipment and wiring specifications.

Yes, as long as the fuses comply with the standard specifications for MEGA or AMG fuses (dimensions, bolt hole configuration, and amp rating range), they will be compatible with this BLUE SEA 5001-BSS fuse block.

Yes, due to its robust construction and protective cover, this fuse holder is well suited for installations in demanding environments such as engine compartments or areas exposed to splashes in marine environments.

Yes, this is one of the common applications for this fuse holder. It is ideal for protecting the main battery circuit, especially on boats with high loads, when selecting a fuse with the appropriate amperage.