ECLIPSE SNL100, Neon Flex Light, 5M - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Megtakarítás: 11%

Garmin

010-04536-00

Garmin ECLIPSE SNL100, Neon Flex szalag, 5 m

Le Garmin ECLIPSE SNL100 est une solution d'éclairage LED néon flexible de 5 mètres, offrant une illumination continue sans points pour les applications marines intérieures et extérieures. Étanche IP68 et compatible 12V DC, il se distingue par sa flexibilité et sa capacité à être coupé sur mesure. Les clips de fixation en acier inoxydable et le kit de scellement sont inclus pour une installation personnalisée.

Prix publicBénéficier du tarif pro

248,82€

248,82€ ~~280,00€~~

ÁFA-val Szállítás kiszámítása a fizetéskor.

Nincs raktáron

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

A termék típusa	Ruban lumineux
Tipikus villamosenergia-fogyasztás	25
IP védettségi fokozat	IP68
Világítási fokozat szabályozható	Oui
Beállítható nyalábolás	Non
Bend Direction	Latérale
Szín / kivitel	Translucide
Cuttable Length Increments Mm	25
Magasság	22
Telepítési típus	Montage en surface
Beépített kapcsoló	Non
Length M	5
Minimum Bend Radius Mm	120
Működési feszültség-tartomány	10-15
Power Consumption Typical Per Meter	5 W/m
Tápellátás típusa	DC
UV-ellenállás	Oui
Water Submersion Rating	Immersion temporaire
Szélesség	16

Description détaillée

A Garmin ECLIPSE SNL100 egy hajókra szánt, LED-alapú, flexibilis neonfény megoldás. Ebben a verzióban 5 méteres hosszban kínáljuk, mint folytonos megvilágítást biztosító fényforrást, amely a hajók belsejében és külső felületein is alkalmazható, látható fénypontok nélkül.

Konstrukció és műszaki jellemzők

A "bend-flex" kialakításnak köszönhetően az SNL100 görbült felületekhez (pl. ablakpárkányok, kabinmennyezetek, T-topok) illeszthető, minimális 120 mm-es sugárral a függőleges tengely mentén. Fontos: a vízszintes tengely mentén nem szabad csavarni vagy hajlítani, mert az károsíthatja. A rendszer 12 V DC-ről működik (10–15 V DC tartomány), és körülbelül 5 W-t fogyaszt méterenként és csatornánként. IP68-as védettséggel rendelkezik, ami teljes védelmet nyújt a por ellen és ideiglenes vízbe merítés ellen, de nem alkalmas állandó víz alatti használatra.

Telepítés és integráció

A Garmin ECLIPSE SNL100 telepítéséhez rozsdamentes acélból készült klipseket használnak, amelyeket 300 mm-es távolságokban ajánlott elhelyezni. A szalag 25 mm-es lépésekben vágható, a vágott végek pedig a mellékelt tömítő készlettel kell lezárni. A monokróm (kék vagy fehér) és kétcsatornás (kék és fehér) verziókban 60 LED található méterenként, míg az RGB változatban 120 db RGB LED/mm. A vezérlés multifunkciós kijelzővel, okostelefonnal, pillanatnyi kapcsolóval vagy ECLIPSE Command Centerrel történhet – az utóbbi az RGB modellekhez kötelező. A termékre 3 év garancia vonatkozik, és UV-álló anyagból készült, bár a közvetlen, tartós napfényhatás kerülendő.

Documentations

Type	Nom
	Notice d'installation - Guide d'installation ECLIPSE SNL100 Neon Flex (EN)

Avis de l'expert

« Technical analysis: Garmin ECLIPSE SNL100 flexible neon lighting »

The Garmin ECLIPSE SNL100 LED light strip (also marketed under the Lumishore brand) is a decorative and functional lighting option particularly well-suited for marine installations. Its ability to provide continuous light, without the "dotted" effect of standard LED strips, is a major aesthetic advantage for visible applications such as indirect lighting of side decks, handrails, or hull line accents. The product’s flexibility, with a 120 mm bending radius, allows for clean integration even on complex surfaces where rigid profiles would be unsuitable. This feature sets it apart from more traditional linear lighting solutions.

During installation, it is critical to follow the manufacturer’s guidelines, particularly regarding bending only along the vertical axis and using two people for long sections to avoid damaging the internal LED strip. The ability to cut the strip in 25 mm increments provides precise adjustment flexibility to the desired location, but requires rigorous sealing of the cut end to maintain IP68 waterproofing. While the product is robust and UV-resistant, like all exposed lighting, installation in areas shielded from direct and intense sunlight will extend its lifespan. The 12V DC compatibility simplifies integration into most onboard electrical systems, and the option to control RGB versions via the ECLIPSE Command Center makes it a component of a broader, manageable lighting system.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Garmin ECLIPSE SNL100, Neon Flex szalag, 5 m

248,82€

248,82€ ~~280,00€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the Garmin ECLIPSE SNL100 Neon Flex Light?

The Garmin ECLIPSE SNL100 is a flexible LED neon-style lighting solution specifically designed for marine environments. It provides continuous and uniform illumination without visible light points, making it ideal for indoor and outdoor installations on vessels.

What is the length of this LED strip?

This Garmin ECLIPSE SNL100 light strip model has a length of 5 meters.

Is the LED light strip waterproof and suitable for use in humid environments?

Yes, the Garmin ECLIPSE SNL100 is IP68 certified, meaning it is fully protected against dust and can withstand temporary immersion in water. It is suitable for installation in damp areas, both inside and outside the boat. However, it is not designed for permanent submersion.

Can the LED strip be cut to the desired length?

Yes, the Neon Flex can be cut to specific lengths. It is important to cut only at the marked cutting points, in 25 mm increments. After cutting, the new ends must be sealed using the provided sealing kit to maintain the product's integrity and waterproofing.

What is the power consumption of the Garmin ECLIPSE SNL100?

The Garmin ECLIPSE SNL100 has a power consumption of approximately 5 Watts per meter and per channel.

Does the tape emit uniform light or visible light spots?

The Garmin ECLIPSE SNL100 is designed to provide continuous illumination without visible hotspots, creating a smooth neon-like and aesthetic effect.

How to install the Garmin ECLIPSE SNL100 on my boat?

The Garmin ECLIPSE SNL100 is installed using the provided stainless steel clips, which should be secured every 300 mm. Before installation, disconnect or isolate the boat's power source. Carefully unroll the tape and allow it to relax for about one hour before positioning.

Is it possible to bend the LED strip to fit curved surfaces on the boat?

Yes, the "bend-flex" design of the SNL100 allows it to be adapted to curved surfaces. It can be bent along the vertical axis with a minimum bending radius of 120 mm. However, it is crucial not to twist or bend it along the horizontal axis to preserve its integrity and functionality.

Where can the SNL100 be installed on a boat?

The SNL100 can be installed inside or outside the boat, including in wet areas such as cockpit coamings, cabin ceilings, or T-tops. Although it is made from UV-resistant material, it is recommended not to install it in areas exposed to strong direct sunlight to optimize its lifespan.

Is it necessary to hire a professional for electrical and mechanical installation?

It is strongly recommended that a qualified professional handle the electrical and mechanical installation of the Garmin ECLIPSE SNL100 to ensure correct and safe installation.

What precautions should I take when handling Neon Flex?

Always unroll the Neon Flex carefully along its entire length; do not lift it by one end only. Do not let the strip fall or twist during installation. Do not apply excessive pressure; this could damage the internal LED strip. Do not pull, stretch, twist, or bend the Neon Flex on the vertical axis (only on the horizontal axis with the specified bending radius). For lengths over 1 meter, it is recommended to use two people for installation. Always lay the Neon Flex flat and straight; do not allow it to bend, twist, or bunch up.

How to seal the ends after cutting the LED strip?

After cutting the Neon Flex at a marked cutting point, use the provided sealing kit. To prevent the sealant from covering the LEDs and causing discoloration, it is important to rewind the Neon Flex onto its reel with the cutting points facing outward. This retracts the printed circuit board (PCB) into the extrusion, enabling effective and clean sealing.

What is the required supply voltage for the SNL100?

The Garmin ECLIPSE SNL100 is designed to operate only on 12V DC systems. It can function within a voltage range of 10 to 15 Volts DC. Do not connect it to voltages outside this range or directly to an alternating current (AC) source.

Is the SNL100 compatible with Garmin ECLIPSE Command Center lighting control systems?

Yes, the Garmin ECLIPSE SNL100 is compatible with ECLIPSE Command Center lighting control systems. For RGB versions of Neon Flex, using an ECLIPSE Command Center and optional extension modules is mandatory for proper operation and color control.

Can I connect different types of Neon Flex (monochrome, bicolor, RGB) to the same zone of the ECLIPSE Command Center?

No, it is important not to add monochrome, bicolor, and RGB lighting on the same zone output of the ECLIPSE Command Center. Use a separate zone output for each type of Neon Flex to ensure proper operation.

Is it possible to connect the blue and white channels of a two-tone model simultaneously?

No, it is important not to wire the blue and white channels of a two-tone model so that they light up simultaneously. The wiring diagram for two-tone versions is designed for separate color control.

Can the ribbon be directly connected to an AC power supply?

No, the Garmin ECLIPSE SNL100 is designed to operate exclusively on a 12V DC power supply. It must never be connected directly to an alternating current (AC) source.

What components are included for the installation of Neon Flex?

The Garmin ECLIPSE SNL100 comes with stainless steel mounting clips. If you cut the tape to a custom length, a sealing kit is also included to protect the cut ends.

Is the LED light strip UV-resistant?

Yes, the Neon Flex is made from UV-resistant material. However, to optimize its durability and performance, it is recommended not to install it in areas exposed to strong and prolonged direct sunlight.