LUX CL25, udvari világítás 0,5 W, fekete dísztárcsa

The Garmin LUX CL25 is a compact LED courtesy light designed for marine environments. It provides CRGBW (cool white, red, green, blue, warm white) full-spectrum lighting with adjustable white color temperature from 2700 K to 6500 K. It consumes 0.5 watts per fixture and is IP68 certified.

Each Garmin LUX CL25 luminaire has a nominal power of 0.5 watts. The average total consumption is 1.2 W.

The LUX CL25 provides CRGBW full-spectrum lighting, which includes cool white, red, green, blue, and warm white. The white color temperature is also adjustable from 2700 K to 6500 K.

Yes, the LUX CL25 luminaire is IP68 certified. This means it is fully protected against dust and can withstand temporary immersion in water. It is suitable for indoor and outdoor installations, including wet areas, but is not designed for permanent submersion.

The body of the LUX CL25 luminaire is made of black ABS, and it features a black stainless steel bezel.

The LUX CL25 light fixture operates within a voltage range of 10.5 to 31 VDC.

Typical current consumption is 0.06 A at 12 V and 0.03 A at 24 V. Maximum current consumption is 0.1 A at 12 V and 0.05 A at 24 V.

The LUX CL25 is designed for courtesy lighting in marine environments. It can be installed indoors or outdoors, including in wet areas, on bridges, stairs, and to highlight architectural features. It must not be permanently submerged.

The mechanical installation requires drilling a 25 mm (1 inch) hole for mounting. The front lens diameter is 45 mm.

The light fixture must be mounted on a flat, non-curved surface to ensure correct installation and waterproofing.

Yes, it is recommended to use a marine-grade transparent sealant between the lens and the bezel, as well as behind the bezel. For outdoor installations or in damp areas, it is also advisable to secure the fixture body with an appropriate marine-grade sealant. Ensure no sealant comes into contact with the O-rings.

Excess sealant must be cleaned with a soft cloth, soap, and water. Do not use chemical cleaners.

Before proceeding with the installation, it is imperative to ensure that the vessel's power source and battery are disconnected or isolated. It is also recommended that a qualified professional performs the electrical and mechanical installation.

The electrical connection is made via a 3-wire cable. The luminaire requires connection to a Lumishore LUX light control module. For complete wiring diagrams, refer to the LUX light module installation guide.

Yes, the LUX CL25 light fixture is designed to be used exclusively with the Lumishore Lux light control module.

No, the LUX CL25 light fixture must not be connected to third-party lighting control products or dimmers other than the Lumishore Lux light control module.

No, the Lumishore LUX light control module is designed to work ONLY with Lumishore LUX lighting products. Using it with other brands of luminaires will void the warranty.

Lumishore Ltd guarantees its lighting systems, including the LUX CL25, against manufacturing defects for a period of three years from the original purchase date.

The warranty may be void in the following cases:

Improper use or abuseIncorrect installationNegligence or inadequate packagingDamage caused by disasters (e.g., fire, flood, storm, and lightning)Installation by unqualified personnelUnauthorized repair or modificationUnapproved installationsFailure to comply with installation, maintenance, and usage instructions in the document also voids the warranty.

No, the LUX CL25 luminaire is sold separately from the Lumishore LUX light control module. The latter is a required component for the proper operation of the luminaire and must be purchased separately.