LUX SNL180, Superbright Neon Flex Strip Light, 2200mm - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Megtakarítás: 12%

Garmin

010-04429-00

LUX SNL180, neonflex Superbright szalag, 2200 mm

La bande lumineuse néon flex Garmin LUX SNL180 de 2200mm est une solution d'éclairage marin Superbright avec 180 LEDs/m, offrant un spectre CRGBW complet et un blanc tunable de 2700K à 6500K. Certifiée IP67 et résistante aux UV et au brouillard salin, elle assure une illumination homogène sans points visibles. Elle est conçue pour fonctionner exclusivement avec un module de pilote Lumishore LUX dédié et s'installe via les clips en acier inoxydable fournis.

Prix publicBénéficier du tarif pro

175,43€

175,43€ ~~199,99€~~

ÁFA-val Szállítás kiszámítása a fizetéskor.

Nincs raktáron

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

A termék típusa	Bande lumineuse flexible
Működési feszültség	10.5 à 31 VDC
Tipikus villamosenergia-fogyasztás	19.14 W
Fény színe	CRGBW (blanc froid, rouge, vert, bleu, blanc chaud)
IP védettségi fokozat	IP67
Világítási fokozat szabályozható	Oui
Szalag hossza	2.2
LED-sűrűség / méter	180.0
Construction Type	Entièrement encapsulée et potée
Direct Sunlight Exposure	Non
Telepítési környezet	Intérieur,Extérieur,Au-dessus de la ligne de flottaison
Installation Requirement	Installation par un professionnel qualifié
Max Current Consumption Per Meter 12v	0.6
Max Current Consumption Per Meter 24v	0.36
Max Strip Length Per Driver	10
Villamosenergia-fogyasztás méterenként	8.7
Required Driver Module	Module de pilote de bande lumineuse LUX Lumishore
UV-ellenállás	Oui

Description détaillée

A Garmin LUX SNL180 neonflex szalagot tengeri világításra tervezték. A 2200 mm hosszú Superbright változat 180 LED-et tartalmaz méterenként, és teljes CRGBW színspektrumot (hidegfehér, piros, zöld, kék, melegfehér) biztosít, a fehér fény hőmérséklete 2700K és 6500K között állítható. Mindezt egyetlen flexibilis szalagban. IP67-es védettsége miatt beltéri és fedélzeti (a flotta vonala feletti) alkalmazásra is alkalmas.

Teljesítménymutatók és rendszerintegráció

A LUX SNL180 a „dot-free” megvilágítást nyújt, amit egy diffúziós réteg tesz lehetővé, amely homogenizálja a LED-ek fényét, szemben a hagyományos LED-szalagokkal. Ez a flexibilitás görbült felületekhez való alkalmazkodást teszi lehetővé, például a fedélzeti korlátok, kabinplafonok vagy T-topok alá történő telepítéskor. Kizárólag dedikált LUX szalagvezérlő modullal táplálható, 10,5–31 VDC feszültségtartományban a LUX vezérlőmodulon keresztül. Maximális áramfelvétele 0,6 A/m 12 V-on és 0,36 A/m 24 V-on. Átlagos teljesítményfelvétele 8,7 W/m. Minden vezérlőmodul akár 10 méter szalagot is képes kezelni. Teljesen beágyazott és kiöntött kivitele UV- és sóködállóságot garantál.

Telepítés és tartósság

A LUX SNL180 telepítése rozsdamentes acélcsipeszekkel történik, csavarokkal rögzítve. A szalag csak oldalirányban hajlítható, minimális hajlítási sugár 120 mm, függőleges irányú hajlítás vagy csavarás nem megengedett. A szakaszok gyárilag le vannak zárva, IP67-es védettséget biztosítanak, és nem szabad őket levágni. A termékre 3 év garancia vonatkozik. Vezérelhető pillanatkapcsolóval vagy EOS-LUX vezérlőközponton keresztül kompatibilis multifunkciós kijelzőkkel (MFD), teljes CRGBW színvezérléssel és precíz fehérszín-szabályozással, standard fényerősség-állítási lehetőségekkel.

Documentations

Type	Nom
	Notice d'installation - Guide d'installation Lumière flexible LUX SNL180 2200mm

Avis de l'expert

« Technical analysis: Garmin LUX SNL180 neon flex light strip »

The Garmin LUX SNL180 is a marine lighting solution worth considering for boat owners seeking refined aesthetics and advanced functionality. Its main added value lies in its "dot-free" rendering, which provides a continuous, uniform light line—a clear visual advantage over classic LED strips where individual light points are often visible. This feature makes it particularly suitable for applications where lighting is directly exposed, such as under guardrails, handrails, or to highlight interior architectural contours.

Regarding installation, it is critical to note that the SNL180 requires the use of a dedicated Lumishore LUX driver module. This dependency limits flexibility when integrating with third-party lighting systems but ensures optimized power management and enhanced protection against voltage fluctuations, contributing to the product’s longevity. The fact that the strip is supplied in fixed lengths and cannot be cut simplifies installation for standard lengths but requires precise planning of requirements. The minimum bending radius of 120mm and the prohibition against bending along the vertical axis are mechanical constraints that must be carefully considered during the design of the lighting layout. Using two people for lengths exceeding 1 meter is a practical recommendation to avoid damaging the strip.

Although rated IP67 and resistant to UV, salt spray, and fog, it is essential to clarify that this product is not designed for permanent submersion. It is therefore ideal for damp or spray-exposed areas but not for underwater use. Its ability to offer a full CRGBW spectrum with tunable white, combined with potential integration with MFDs via an EOS-LUX Command Center, provides lighting ambiance customization possibilities far beyond what many competing solutions offer. This product is thus suited for new installations or demanding renovations that can integrate the Lumishore/Garmin ecosystem for a consistent and high-performance user experience.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

LUX SNL180, neonflex Superbright szalag, 2200 mm

175,43€

175,43€ ~~199,99€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the length of the Garmin LUX SNL180 light bar?

The Garmin LUX SNL180 light strip measures 2200mm in length. It is important to note that it is supplied in pre-cut and factory-sealed lengths and must not be cut under any circumstances.

What color lighting options are available with this LED strip?

This LED strip provides a full CRGBW spectrum, including cool white, red, green, blue, and warm white. Additionally, the white color temperature is fully adjustable, ranging from 2700K to 6500K.

Is the LUX SNL180 LED light bar suitable for outdoor marine environments?

Yes, the LED strip is designed with an IP67 protection rating, making it perfectly suitable for indoor and outdoor installations on a boat, specifically above the waterline. However, it is not designed for permanent submersion in water.

What is "dot-free" illumination and what is its advantage?

The "dot-free" illumination (no visible light points) means the light strip delivers a perfectly uniform light output, with no individual LED points visible. This is achieved using a diffusion layer that blends the LED light, providing more uniform and aesthetic lighting than standard LED strips.

How many LEDs per meter does the LUX SNL180 light strip contain?

The Garmin LUX SNL180 LED strip integrates 180 LEDs per meter, contributing to its Superbright illumination and uniform light output.

Is the light strip flexible to adapt to curved surfaces?

Yes, the LED strip is designed to be flexible and adapt to curved surfaces. It has a minimum bending radius of 120mm, but it is crucial to bend it only along the lateral axis and not to twist or bend it along the vertical axis to avoid any damage.

Is the LED strip UV-resistant?

Yes, the LED strip is made from UV-resistant material. However, to optimize its lifespan and performance, it is recommended not to install it in areas exposed to strong direct sunlight.

Can I cut the LUX SNL180 LED light strip to adjust its length?

No, it is imperative not to cut the LUX SNL180 light strip. It is supplied in factory-sealed prefabricated lengths to ensure compliance with IP67 standards. Any cutting would void these certifications as well as the product warranty.

How to install the LED strip on a surface?

The installation of the LED strip is done using the supplied stainless steel clips. These clips must be screwed into place with appropriate screws. Once the clips are secured, the flexible neon strip is simply pushed into place until an audible "click" confirms it is properly locked in. It is recommended to use multiple clips around tight curves to ensure good conformity and prevent it from lifting.

Are there any precautions to take when folding the LED strip?

Yes, the LED strip can only be bent sideways, with a minimum bending radius of 120mm. It is critical not to bend it along the vertical axis or twist it, as this could damage the internal LEDs and void the warranty.

Should I disconnect the boat's power supply before installing the LED light strip?

Yes, it is imperative to always ensure that the ship's power source and the battery are disconnected or isolated before proceeding with any electrical installation to guarantee your safety and that of the system.

Is it recommended to hire a professional for the installation?

Yes, it is strongly recommended that a qualified professional performs the electrical and mechanical installation of the LED strip. This ensures correct, safe installation in compliance with technical specifications.

How to handle the light strip during installation to avoid damage?

To avoid damaging the strip, always unroll it carefully along its entire length and do not let it drop or twist. For lengths over one meter, it is recommended to use two people: one to install and another to hold and unroll the strip. Do not apply excessive pressure, pull, stretch, twist, or bend the strip on the vertical axis.

What equipment is required to power and control the LUX SNL180 LED strip?

The LUX SNL180 LED strip must be used exclusively with Lumishore's dedicated LED strip controller modules. It is not compatible and must not be connected to other lighting control products or third-party controllers.

Can a single LUX autopilot module control multiple light strips?

Yes, each LUX autopilot module is designed to handle up to 10 meters of total light strip length. If you need to install more than 10 meters, additional autopilot modules will be required.

Does using an autopilot other than the one recommended affect the warranty?

Yes, using the LUX SNL180 light strip with third-party autopilots other than Lumishore’s dedicated light strip autopilot module will void the product warranty.

What is the warranty duration for the Garmin LUX SNL180 LED light bar?

Lumishore Ltd, the manufacturer, guarantees its lighting systems and associated accessories against manufacturing defects for a period of three years from the original purchase date.

Which actions can void the warranty of the LED strip?

The warranty may be void in case of misuse or abuse, incorrect installation or negligence, damage caused by disasters (fire, flood, storm, lightning), installation by unqualified personnel, unauthorized repair or modification, non-compliance with all installation, maintenance, and usage instructions specified in the manual. Using third-party autopilots not approved by Lumishore will also void the warranty.