Yanmar Sail Drive SD60-5 adapterlapu

It provides a rigid mounting base for installing the Integrel high-power generator on your marine transmission. It ensures perfect alignment between the generator and the marine transmission (Sail Drive).

The Integrel system replaces a generator and produces very high mechanical torque. A standard mount could bend or create vibrations. This plate is specifically sized to withstand these significant stresses.

This mounting plate is exclusively designed to fit Yanmar Sail Drive SD60-5 struts.

No, the machining and mounting points are specific to the Yanmar SD60-5 gearcase geometry. It is not compatible with transmissions from other manufacturers.

This high-precision mechanical part is machined in the United Kingdom, ensuring excellent manufacturing quality to withstand demanding marine environments.

No, the plate is designed to fit perfectly with the existing mounting points of your Sail Drive SD60-5, without requiring drilling or structural modifications to your engine.

Poor installation or misalignment will inevitably cause significant vibrations and premature wear on the belts and bearings of your power generation system.

Although the part fits the original mountings, integrating a high-power generation system requires absolute mechanical precision. It is strongly recommended to entrust this task to a professional installer.

Yes, this plate is made from robust materials suitable for the marine environment. However, Integrel recommends keeping the engine mounts dry to prevent corrosion of system components.

No, the mounting plate is installed directly on the inner part of the Sail Drive housing, accessible from the engine room. Hauling the boat is not required for this mechanical operation.

No, it is specifically designed to support the weight and high torque of the Integrel high-power generator, not a standard marine alternator.

You can check the exact model of your transmission by consulting the identification plate fixed directly on the Sail Drive housing in your engine compartment, or by referring to your boat's technical manual.

No, the plate simply provides a secure mechanical connection. The Integrel system is designed to use only the engine's excess power without compromising propulsion integrity or performance.

Thanks to its very high-precision machining, it ensures exact mounting geometry and perfect alignment of the pulleys. This eliminates abnormal friction and significantly extends the belt life.

The plate itself does not require specific maintenance, but it is strongly advised to visually check its condition and verify the tightening torque of the mounting bolts during the annual overhaul of your Yanmar engine.

No, the geometry and mounting points differ greatly between strut models. This reference (ISD0013) is strictly reserved for the SD60-5 version.

Choosing Integrel's original plate ensures you use a part that has been tested, approved by the manufacturer, and perfectly sized to absorb the specific torque of this generator—a guarantee that a custom-made part cannot provide without expensive engineering calculations.

The plate is designed to ensure secure mounting. Additionally, the Integrel system as a whole reduces overall boat vibrations by eliminating the need for an independent generator.

Alignment must be meticulously checked using precision tools (such as a pulley alignment laser) by the technician responsible for installation, and this must be done before the final tensioning of the Integrel system belts.

Yes, absolutely. If your catamaran is equipped with Yanmar engines coupled to Sail Drive SD60-5 saildrives, this plate will fit perfectly in each of your engine compartments to accommodate the Integrel system.