Navico ActiveImaging™ 3-in-1 aktív képalkotó mélységmérő 7,6 m-es kábellel

This is an underwater imaging transducer designed for fishing. It combines traditional CHIRP, SideScan, and DownScan Imaging, along with a temperature sensor, all in a single unit for simplified installation.

The Navico ActiveImaging™ 3-IN-1 transducer combines traditional CHIRP, SideScan and DownScan Imaging technologies. It also includes a temperature sensor for depth and water temperature measurement.

The Active Imaging™ technology optimizes the steering of SideScan beams to enhance resolution and range of the imagery. It enables the identification of underwater structures such as rocky outcrops, seagrass beds, and drop-offs at greater distances, providing finer details over a larger area.

This transducer operates on CHIRP medium/high frequencies (83/200 kHz) for traditional CHIRP, and specific frequencies for SideScan and DownScan Imaging to optimize imaging.

Yes, the Navico ActiveImaging™ 3-IN-1 transducer is equipped with a sensor that provides depth and water temperature data.

The weight of the ActiveImaging™ 3-IN-1 transducer without its cable is 0.37 kg (0.81 lbs).

The transducer is constructed from polymer. This material was selected because it reacts to sound waves similarly to water, thereby contributing to the clarity of underwater images.

The transducer uses separate sonar elements for SideScan transmission and reception. This design increases ping speed and image resolution while improving lateral range compared to older imaging sounders.

This transducer is compatible with Lowrance HDS LIVE, HDS Carbon, Elite Ti2 multifunction displays, as well as Simrad NSS evo3 and GO series.

The Navico ActiveImaging™ 3-IN-1 transducer is equipped with a 9-pin connector, ensuring a reliable connection with compatible devices.

The transducer comes with a 7.6 m (25 ft) cable.

The ideal mounting location for the transducer is in an area where the water flow is undisturbed, to optimize sonar signal quality.

Yes, it is not recommended to mount the transducer beyond the chine line of the boat, as this could disrupt water flow and affect the depth sounder's performance.

For installation, the recommended pilot hole diameters for screws of diameter 10 are:

For soft materials (e.g., plywood): Ø 3.7–4.0 mm (5/32"). For rigid materials (e.g., fiberglass, acrylic, hardwood): Ø 4.1–4.7 mm (3/16").

It is recommended to apply a high-quality marine-grade sealant/adhesive, suitable for use above or below the waterline, to the mounting holes to ensure a perfect seal.

Yes, through-hull (shoot-thru-hull) mounting is an installation option for this transducer, providing protection against damage and a discreet installation.

No, through-hull transducers cannot be installed through wooden hulls. This method is generally reserved for fiberglass or composite hulls.

"3-IN-1" indicates that the transducer combines three key imaging technologies in a single unit: traditional CHIRP, SideScan, and DownScan Imaging. This provides a complete and detailed view of the underwater environment.

The Navico ActiveImaging™ 3-IN-1 transducer is designed to be compatible with multiple ranges of multifunction displays, ensuring seamless integration with your navigation system. It is compatible with:

Lowrance HDS LIVE multifunction displaysLowrance HDS Carbon multifunction displaysLowrance Elite Ti2 multifunction displaysSimrad NSS evo3 seriesSimrad GO series

To ensure optimal performance of your ActiveImaging™ 3-in-1 transducer, it is essential to follow these mounting recommendations:

Ideal location: The transducer must be installed in an area with undisturbed water flow.Location to avoid: It is strongly discouraged to mount the transducer beyond the chine of your boat.Mounting options: The transducer can be installed in various ways, including on the transom, on an electric motor forward, or via through-hull mounting.Guide holes recommended for screws with a diameter of 10 mm:For soft materials (e.g., plywood): use a drill bit of Ø 3.7–4.0 mm (5/32").For rigid materials (e.g., fiberglass, acrylic, hardwood): use a drill bit of Ø 4.1–4.7 mm (3/16").Sealing: Apply a high-quality marine-grade sealant/adhesive, suitable for use above or below the waterline, to all guide holes to ensure watertightness.Important note for through-hull mounting: Through-hull transducers cannot be used with wooden hulls.