NMEA 2000 kiterjesztő kábel 0,6 m

This 0.6 m NMEA2000 extension cable is designed to connect instruments, sensors, GPS antennas or multifunction displays to the backbone of your NMEA2000 network. It allows you to extend connectivity and integrate new devices into the existing system.

This NMEA 2000 extension cable has a length of 0.6 meters (60 centimeters).

This cable uses standard micro-C connectors, compliant with the NMEA2000 standard. These connectors have five pins and are designed for secure and watertight connections in a marine environment.

Yes, this cable is specifically designed for the marine environment. NMEA 2000 connectors are rugged and watertight when properly installed, which is essential to withstand damp and saline conditions.

This cable is a "drop cable" (derivative cable). It is used to connect an individual device to a T-connector on the backbone of the NMEA2000 network.

A 0.6-metre length is ideal for short connections, particularly when the device to be connected is very close to the network backbone. This helps avoid clutter and unnecessary cable loops, contributing to a clean and organized installation.

This cable is manufactured by Navico, a group recognized in marine electronics, including brands such as Simrad, Lowrance, and B&G.

The reference number (SKU) for this cable is 000-0119-88.

Yes, this cable uses the standard NMEA2000 micro-C connectors and is compatible with all NMEA2000-certified equipment, regardless of brand, as long as they use this type of connector.

Yes, the NMEA 2000 standard is universal. As long as the device from another brand is NMEA 2000 certified and uses standard micro-C connectors, this cable will be compatible.

No, this cable is specifically designed for the NMEA2000 protocol. NMEA0183 is a different protocol that uses separate cables and connectors. This cable is not compatible with an NMEA0183 network.

Raymarine SeaTalkNG networks use the NMEA2000 protocol but with proprietary connectors. This cable, equipped with standard micro-C NMEA2000 connectors, is not directly compatible with SeaTalkNG connectors without a specific adapter (not included with this product).

Yes, this is precisely one of the main uses of this cable. It allows you to easily add a new instrument or sensor to your existing NMEA 2000 network by connecting it to a T-connector on the backbone.

Yes, the NMEA 2000 standard allows for the transmission of both electrical power and data. This cable will carry both power and data to NMEA 2000-compatible devices connected to the network.

To install this cable, you must firmly screw it into a T-connector on your NMEA 2000 backbone at one end, then into the device you want to connect at the other end. Ensure the connections are hand-tight to guarantee waterproofing.

No, NMEA 2000 connectors are designed to be tightened by hand. No specific tool is generally required to make a secure and watertight connection.

This cable must be connected between a T-connector on your NMEA 2000 backbone and the device (instrument, sensor, display) you wish to power and connect to the network.

No, it is not recommended to cut or modify the length of this cable. NMEA2000 cables are manufactured with factory-sealed, specific terminations to ensure signal reliability, integrity, and waterproofing. Cutting the cable would compromise these features.

No, NMEA 2000 drop cables have no specific connection direction. Both ends are identical and can be connected either to the T-connector or to the device.

The NMEA 2000 standard recommends a maximum length of 6 meters for drop cables to maintain signal integrity. This 0.6 m cable is well below this limit, ensuring optimal performance.