Bronz átmenő szonda HIGH CHIRP 12°-os kúpszögű CPT-S, 10 m kábellel

The HIGH CHIRP technology used by this Raymarine CPT-S transducer delivers highly detailed sonar returns and improved target separation underwater. Unlike DownVision imaging systems, the traditional cone beam of this transducer is optimized for accurate fish detection and seabed tracking across various depths.

The 12° angle of this transducer is specifically designed to compensate for the deadrise of your vessel's hull. This ensures the sonar beam is directed vertically toward the seabed, providing optimal performance and accurate readings, particularly for hulls with moderate deadrise.

This transducer is a through-hull model, which means it requires drilling the hull of your boat for installation. Raymarine recommends installation by a certified installer to ensure proper implementation and to benefit from the enhanced warranty.

No, it is essential not to cut the depth sounder's cable. Cutting the cable would significantly reduce the fishfinder's performance, void the product warranty, and invalidate the European CE mark. If the cable is cut, it cannot be repaired and must be replaced.

This CPT-S transducer is designed to be compatible with Raymarine CHIRP fishfinder systems. It typically works with Raymarine multifunction displays (MFDs) from the Axiom and Element series, as well as certain Dragonfly models that support CPT-S conical beam transducers.

This transducer is made of bronze for increased durability, particularly suited to demanding marine environments. Bronze is a more robust option than plastic and is recommended for fiberglass or wooden hulls, ensuring better longevity and resistance to the elements.

To maintain your depth sounder’s performance, follow these guidelines:

Apply a thin coat of water-based antifouling paint to the transducer to prevent marine growth buildup. Reapply every 6 months or at the start of each season.
Clean the transducer with a soft cloth and mild household detergent.
For stubborn grime, use a non-abrasive scrubbing pad like a Scotch Brite™ pad, ensuring you do not scratch the transducer face.
Caution: Never use ketone-based paint, spray paint, or harsh cleaning solvents such as acetone, as these will damage the transducer.

This Raymarine E70340 transducer complies with the applicable European harmonised standards. It meets Directive 2013/53/EU on marine equipment and EN ISO 8846:2017, ensuring reliability and safety for marine use.