Raymarine RVM-412 – 2 db 12°-os átmenő acél szonda bal oldali / jobb oldali oldaltöltő csomag AXIOM2 és RVM1600 rendszerekhez (2 x 2 m kábel Y és 8 m-es kábelbővítő)

The Raymarine RVM-412 package is designed to provide detailed and three-dimensional underwater imaging using RealVision Max 3D technology. It allows visualization of seabed structure, fish, and submerged objects with enhanced clarity, which is essential for fishing and navigation.

The RVM-412 transducers are through-hull stainless steel transducers, specifically angled at 12°. They are designed to be installed on the port and starboard sides, optimizing RealVision Max 3D sonar performance on hulls with a significant deadrise angle (between 8 and 15°).

The RVM-412 transducers use Sonar RealVision Max 3D technology. This technology provides three-dimensional underwater imaging, enabling detailed visualization of the seabed and submerged objects.

Including two transducers, one for port and one for starboard, ensures consistent SideVision and DownVision coverage without dead zones. This setup is particularly beneficial for hulls with significant deadrise angles, guaranteeing optimal signal quality.

The RVM-412 transducers are made of stainless steel, a robust material suitable for demanding marine environments.

This pack is specifically designed for hulls with a high deadrise angle, with a V-angle between 8 and 15°. The 12° tilt of the transducers is optimized for these hull types.

Yes, the RVM-412 pack includes complete wiring: two 2-meter depth sounder cables each, a Y-cable for combined connection of the two transducers, and an 8-meter extension.

The RVM-412 transducers are directly compatible with Raymarine AXIOM2 multifunction displays.

Yes, the RVM-412 transducer pack is compatible with the Raymarine RVM1600 fishfinder module.

Yes, the RVM-412 transducers integrate seamlessly into the Raymarine LightHouse 4 ecosystem, ensuring straightforward installation and configuration.

The pack is designed to integrate with the LightHouse 4 ecosystem. It is always recommended to ensure your AXIOM2 display or RVM1600 module has the latest LightHouse software version for optimal performance.

After installation, a RealVision AHRS (Attitude and Heading Reference System) calibration is required. This calibration ensures precise stabilization of the sonar image for optimal visualization.

Typical tools for installing through-hull transducers include a drill, drill bits suitable for hull drilling, wrenches, marine sealant, and cleaning products. Detailed instructions are provided in the installation manual.

The installation requires drilling holes in the hull. For foam-core fiberglass hulls, specific precautions are needed to seal the core and prevent water intrusion. It is critical to follow the manual's instructions for positioning and drilling.

Yes, it is possible to apply antifouling paint on transducers. It is important to use compatible products and follow the manufacturer's recommendations to avoid degrading the transducer's performance.

The pack includes two 2-meter depth sounder cables, a Y-cable, and an 8-meter extension, providing flexible total length for installation.

The two 2-meter transducers connect to a Y-cable included in the kit. This Y-cable combines the signals from both transducers before routing them to the display or sounder module via the 8-meter extension.

Yes, it is recommended to follow general marine equipment wiring guidelines, particularly regarding cable routing, stress protection, and shielding to prevent electromagnetic interference (EMC).

After installation, it is recommended to perform a transducer test and AHRS RealVision calibration. The LightHouse 4 system user manual provides instructions for checking sonar data and troubleshooting.

The 12° tilt of the transducers is crucial to compensate for the hull's deadrise angle (V). This ensures the sonar beam is directed vertically toward the seabed, even when the boat is stationary or moving, thus providing a precise and stabilized sonar image.