SeaTalk-kábel 1 m

SeaTalk 1 is a proprietary communication protocol developed by Raymarine for its previous-generation navigation instruments. This Raymarine D284 1-meter cable is specifically designed to interconnect devices compatible with this protocol, enabling the extension or maintenance of existing instrument networks.

This SeaTalk Raymarine cable (reference D284) is 1 meter long.

Yes, this cable is an original Raymarine product designed to ensure compatibility and optimal performance with their SeaTalk 1 equipment.

Yes, its 1-meter length and design make it flexible enough for short connections between nearby instruments or for easy integration into confined spaces, such as a dashboard or console.

The main advantages of this cable are:

Reliable connectivity for Raymarine instruments from previous generations.A plug-and-play solution to extend or repair an existing SeaTalk 1 system.Its 1-meter length provides flexibility for short and precise connections.It is specifically designed for maintaining first-generation SeaTalk 1 equipment.

Yes, like all Raymarine products intended for navigation, this cable is designed to provide optimal durability and reliability in a marine environment, resistant to typical conditions encountered at sea.

This specific model is a 1-meter cable. Raymarine typically offers a range of lengths for its SeaTalk 1 cables to accommodate different installation configurations, but this product is 1 meter long.

SeaTalk 1 cables are usually identifiable by their specific 3-pin connectors (often round) and their internal wiring consisting of three wires: one red (power +12V), one yellow (data) and one shielded/black (ground). They are Raymarine-marked.

No, the SeaTalk 1 cable itself does not require external power. It is part of the SeaTalk 1 network that carries the electrical power (12V) and data between connected instruments.

This cable is compatible with a wide range of older Raymarine instruments that use the SeaTalk 1 protocol. This includes some multifunction displays, autopilots, and wind or depth sensors compatible with SeaTalk 1.

No, this SeaTalk 1 cable cannot be connected directly to NMEA 2000 systems. SeaTalk 1 is a different protocol from NMEA 2000. To interconnect these two types of networks, specific converters (for example, a SeaTalk to SeaTalkNG/NMEA 2000 converter) are required.

No, this SeaTalk 1 cable is not directly compatible with SeaTalkNG devices. The SeaTalkNG protocol is based on NMEA 2000 and uses different connectors. To connect a SeaTalk 1 system to a SeaTalkNG network, a SeaTalk1 to SeaTalkNG converter is required.

No, the SeaTalk 1 protocol is proprietary to Raymarine. This cable is specifically designed for connectivity between compatible Raymarine SeaTalk 1 instruments and is not suitable for direct connection with equipment from other brands.

To check if your instruments use the SeaTalk 1 protocol, you can:

Consult the user manual of your Raymarine devices. Check the connectors of your instruments; SeaTalk 1 connectors are usually specific 3-pin plugs. Look up the technical specifications of your instrument model online, ensuring it is a generation compatible with SeaTalk 1.

Installing this cable is generally straightforward and 'plug-and-play'. It is designed to extend or replace existing cables in a SeaTalk 1 network. Simply connect it to the appropriate SeaTalk 1 connectors on your instruments.

No, installing this cable usually does not require specific tools. The connectors are designed to be plugged and unplugged by hand. You may need basic tools (such as a screwdriver to open a panel) to access the connection ports or to neatly secure the cable.

No, this cable does not require any software configuration. Once connected, it automatically transmits data and power between compatible SeaTalk 1 instruments.

To extend your SeaTalk 1 network, you can use this cable to:

Connect a new SeaTalk 1-compatible instrument to a free port in your network.Replace a damaged cable.Add length between two instruments or between an instrument and a SeaTalk 1 junction box.Always ensure the system is powered off before handling connections.

It is generally not recommended to cut and splice SeaTalk 1 cables. While technically possible with electronics skills, this can compromise shielding integrity, connection reliability, and network performance, especially in demanding marine environments. It is preferable to use pre-assembled cables of the appropriate length to ensure optimal operation and system durability.

Yes, this cable is compatible with a wide range of older Raymarine multifunction displays that use the SeaTalk 1 protocol. It enables communication and power supply between these displays and other instruments on the SeaTalk 1 network.