ST800-P120 sebesség- és hőmérséklet-érzékelő

This sensor is a dual-function model. It measures both:

The boat's speed through the water (speed over ground) using a paddlewheel. The water temperature.

No, this sensor is not directly compatible with modern instruments operating on an NMEA 2000 or SeaTalkNG network such as i70s displays or Axiom chartplotters. It is designed for older generations of Raymarine instruments.

Yes, this transducer is a through-hull (transducer) installation. The boat must be taken out of the water to safely drill the hull and perform the installation.

The ST800-P120 sensor body is made of plastic. This makes it suitable for installation on fiberglass or metal hulls.

This sensor is specifically designed to be compatible with older generations of Raymarine instruments, including the ST series such as the ST40, ST50, ST60, ST60+ and ST290 displays.

The sensor comes with a pre-attached 13.8-meter cable, providing sufficient flexibility for connection to your onboard instruments.

Installing the P120 through-hull fitting requires drilling a hole in the hull with a 51 mm diameter (2 inches). It is essential to adhere to this diameter to ensure a correct and watertight installation.

Yes, absolutely. The plastic body of this transducer is ideal for metal hulls (aluminum or steel) as it prevents any risk of galvanic corrosion that could occur with a bronze transducer.

The sensor uses a small paddlewheel that spins as the boat moves through the water. The rotation speed of this wheel is converted into speed data sent to the display.

Yes, this sensor’s design allows you to remove the insert (the part with the impeller) from its through-hull while the boat is in the water. The through-hull is fitted with a self-sealing valve that limits water ingress, letting you clean the impeller or replace the insert with a blanking plug.

This product is considered "obsolete" because it is designed for older navigation systems and does not use modern communication protocols (such as NMEA 2000 / SeaTalkNG). It is primarily used as a spare part to maintain existing installations.

Yes, electronically it is compatible and can replace a bronze model. However, the through-hull fitting is different. If you are replacing an existing bronze sensor, you will also need to replace the bronze through-hull fitting with the plastic one provided. Ensure the drilling diameter is compatible.

Yes, orientation is crucial. The sensor has an arrow that must point toward the bow of the boat. Incorrect orientation would completely skew speed measurements.

Yes, the sensor body is made of robust plastic, a material perfectly suited and resistant to the marine environment, including prolonged use in salt water.

Yes, this sensor with its plastic through-hull fitting is perfectly suited for installation on fiberglass hulls, which is one of the most common applications.

Yes, sensors of this type are usually supplied with a blanking plug. This plug allows you to replace the sensor insert when the boat remains in the water for long periods of inactivity, to prevent marine organisms from colonizing the impeller.

To ensure perfect watertightness, it is essential to use a high-quality marine-grade polyurethane sealant or gasket, such as Sikaflex-291i or an equivalent product. Apply it generously around the through-hull fitting, under the flange, and on the threads before tightening the nut.

No, the connection of this sensor is neither NMEA 2000 nor SeaTalkNG. It is a proprietary connection intended for specific inputs of Raymarine instruments in the ST series (ST40, ST60, etc.).

The "P120" designation refers to the type of through-hull fitting used. It is a low-profile plastic model (the letter 'P' stands for 'Plastic') designed by Airmar, the manufacturer of many sensors for Raymarine.

Yes, it can replace an old speed sensor alone. If your Raymarine ST instrument has an input for temperature, you will benefit from this new information. If it does not, the temperature function of the sensor will simply be ignored, and the speed function will operate normally.