Rail Pod csőre szerelhető tartó - 1 kijelzős Podhoz

The Rail Pod mount on a Scanstrut SPR-1i-RM tube is a bracket specifically designed to secure a single-display Pod housing to a tube, such as a pushpit, pulpit, or tiller extension. It allows you to position your electronic instrument securely and ergonomically aboard your sailboat.

A "Pod 1 display" refers to a watertight Scanstrut enclosure (such as a Scanpod) designed to house a single instrument or display. The Rail Pod SPR-1i-RM is the mounting bracket for this type of enclosure. The "Pod 1 display" enclosure itself is typically not included with the bracket and must be purchased separately.

The Rail Pod mount for Scanstrut SPR-1i-RM tubes is designed to be installed on tubes with common diameters in the marine environment. It is generally compatible with tubes from 25 mm (1 inch) to 33.7 mm (1 1/3 inches). Inserts can be provided to precisely fit different diameters.

Yes, the Rail Pod mount on the Scanstrut SPR-1i-RM tube is designed to provide adjustment flexibility. It allows tilting the display housing to optimize the viewing angle, ensuring maximum readability from different positions onboard.

The SPR-1i-RM Pod Rail integrates a discreet cable management system. The cables of your display can be routed inside the mount and the mounting tube (if the tube allows it), providing a clean installation and protection against elements and snags.

The Pod Rail itself is designed to withstand marine conditions. However, the overall waterproofing will primarily depend on the "Pod 1 display housing" you install in it. Scanstrut housings are generally waterproof to IP standards, and the mount is designed to maintain this waterproofing when correctly assembled with a compatible housing.

The Rail Pod installation is designed to be carried out by a knowledgeable user. It involves attaching the mount to the tube using the supplied hose clamps and then assembling the "Pod 1 display" housing onto the Rail Pod. Detailed instructions are typically included to simplify the process.

This mount is specifically designed for Scanstrut "Pod 1 display" housings. These housings are then adapted to accommodate a wide range of marine electronic instruments, such as multifunction displays, data repeaters, autopilot screens, or small chartplotters, provided they fit within the compatible housing dimensions.

The SPR-1i-RM Rail Pod is primarily designed for mounting on small-diameter horizontal or vertical tubes, such as railings or tiller pedestals. For mast mounting, which typically has a larger diameter, Scanstrut offers specific mast mounts with different fastening systems.

Yes, as a Scanstrut marine product, the Rail Pod is designed to withstand the vibrations and shocks inherent in the nautical environment. Its robust design and high-quality materials ensure stable and secure mounting of your instrument, even in rough sea conditions.

For the installation of the Rail Pod, you will generally need basic tools such as an Allen key (or adjustable wrench, depending on the type of screw), a screwdriver, and potentially a drill if you need to create cable passages or secure the display unit to the bracket. Specific tools are detailed in the installation manual.

Yes, the Rail Pod design includes cable passages. This allows cables to be discreetly routed inside the mount and the mounting tube (if the tube is hollow), providing a very clean and professional installation while protecting the cables from external elements.

Yes, the clamping collar mounting system allows the Rail Pod to be removed from the tube relatively easily without leaving permanent damage. This can be useful for wintering, maintenance, or repositioning the equipment.

Yes, the Rail Pod mount on a Scanstrut SPR-1i-RM tube is universally suitable for marine environments, whether on a sailboat or a powerboat. It can be installed on any compatible tube or rail diameter, providing a versatile mounting solution for various types of vessels.

Yes, the Rail Pod is generally supplied with all the hardware and parts needed to securely mount it on a tube and to assemble the "Pod 1 display" housing to the bracket. This includes hose clamps and mounting screws.

The SPR-1i-RM Pod Rail is specifically designed for mounting on round-section tubes. The clamps are shaped to perfectly fit a round tube. It is not suitable for mounting on square or oval tubes.