UHF relé IF-FR6100D220VM

The UHF IF-FR6100D220VM relay is a professional radio repeater designed to extend radio communication coverage. It supports both digital and analog modes, enabling a gradual transition to digital while optimizing radio spectrum usage.

The IF-FR6100D220VM relay has a transmit power of 2 W.

The dPMR Mode 3 digital trunking system, supported by the IF-FR6100D220VM repeater, operates with a centralized control channel. When a user requests a call, the trunking controller automatically allocates one of the available traffic channels to establish the communication.

The control channel is independent of the traffic channels and continuously transmits a control signal. This system is designed to manage a large number of users and congested traffic channels by allocating a traffic channel for the entire duration of the call, enabling rapid response during a series of communications.

Yes, the IF-FR6100D220VM relay supports a mixed communication mode, allowing it to receive communications in both analog and digital modes on the same channel. This facilitates gradual migration to digital.

The IF-FR6100D220VM relay uses Icom's IDAS™ system, based on the open ETSI dPMR (Digital Private Mobile Radio) standard. It integrates the AMBE+2™ codec for improved audio quality.

The relay uses AMBE+2™ codec which provides clear and dynamic communications, even in noisy environments, thanks to its digital filter. The dPMR digital technology also reduces background noise and improves audio intelligibility at the edge of the coverage area.

Yes, the IDAS™ system integrated into the relay provides an advanced digital scrambling function (scrambler) with a 15-bit code and 32,000 combinations, ensuring conversation privacy.

The IDAS system allows for various types of calls, including:

Individual callsGroup callsGroup call callsEmergency callsBroadcast callsCalls to all users

Yes, the IDAS system supports data and status message transmission. It allows sending up to 100 programmable status messages and can also transmit GPS position if the terminals are equipped with a GPS receiver.

Yes, the IDAS system doubles the capacity of current 12.5 kHz spaced channels, thus optimizing radio resource use and preventing spectrum saturation.

The relay supports an analog channel spacing of 12.5 kHz and a digital channel spacing of 6.25 kHz.

Yes, the 'lone worker' (PTI) function is available with the IDAS system, including for automatic emergency calls, in both digital and analog modes.

The IF-FR6100D220VM relay is designed in a 19-inch rack format, 2U high.

Yes, the repeater can be integrated into an IP network. An optional UC-FR5000 card is required for IP connectivity. In DMR Mode 2 systems, up to 16 repeater sites can be interconnected via an IP network.

The IF-FR6100D220VM relay has an accessory connector of the D-sub 25-pin type.

Yes, for conventional PMR Mode 2 systems, a web-based administration system is available for software updates and online configuration.

Yes, thanks to its mixed digital/analog mode, the relay can coexist with existing analog radio systems, allowing flexible migration to digital. It is also compatible with the IDAS™ system.

Yes, the dPMR system supported by the repeater includes Mode 1 (peer-to-peer communications), Mode 2 (conventional repeater mode), and Mode 3 (digital trunking).

Yes, it is possible to interconnect the relay with IP phones, analog radios, and advanced IP radio systems using the RoIP gateway VE-PG3.

Yes, thanks to the FDMA (Frequency Division Multiple Access) technology used by the IDAS system, direct communications between terminals (peer-to-peer) are possible in narrowband mode, allowing two simultaneous communications on a 12.5 kHz channel with or without a repeater.