Victron Energy Blue Smart IP65 12V 25A akkumulátortöltő CEE 7/17

The Victron Energy Blue Smart IP65 charger is a 12V model providing a 25-amp charging current.

Yes, this charger is rated IP65, meaning it is resistant to water, dust, and chemicals, ensuring enhanced durability in demanding environments.

This charger is compatible with lead-acid batteries (gel, AGM, flooded) and Li-ion batteries (LiFePO₄). It features a specific charging algorithm for Li-ion batteries.

Yes, the Blue Smart IP65 charger can recover deeply discharged batteries, even those at 0 volts, which gives it an advantage over conventional chargers that often refuse to recharge such batteries.

Yes, this charger includes an automatic power supply function.

You can monitor and configure the charger via the VictronConnect app on your smartphone or tablet thanks to Bluetooth Smart connectivity. The app provides real-time visibility of voltage and current.

This charger has a high efficiency of up to 95%, which minimizes heat generation. Its standby power consumption is less than 0.5 Watt.

Yes, the charger is designed to operate within a temperature range of -40°C to +60°C, delivering full power up to 30°C. The cables retain their flexibility even at low temperatures.

The low-power mode reduces the charging current to 10A, which is ideal for charging small batteries. It can be activated by pressing the MODE button for 3 seconds.

The storage mode reduces the charging voltage when the battery remains connected to the charger for more than 48 hours. This helps minimize corrosion of the positive plates and extends battery life.

Yes, the Blue Smart IP65 charger measures ambient temperature during the test phase and compensates for temperature during the charging process. This optimizes the charging voltage for lead-acid batteries without requiring special adjustments for cold or hot environments.

This charger is recommended for batteries with a capacity between 80 and 250 Ah (ampere-hours).

Yes, the Blue Smart IP65 charger uses a specific charging algorithm for Li-ion batteries (LiFePO₄), with automatic reset of the Li-ion undervoltage protection.

No, this specific model is a 12V charger. If a 12V charger is connected to a 24V battery, all charge status LEDs will flash to indicate an incorrect connection.

To connect the charger, follow these steps:

First, connect the DC output clamps to the battery, ensuring correct polarity (RED POSITIVE clamp to the battery’s positive terminal, BLACK NEGATIVE clamp to the negative terminal or vehicle chassis, away from the battery). Next, plug the AC power cord into the wall outlet. To disconnect, first unplug the AC cord from the outlet, then remove the clamp from the vehicle chassis (if applicable), and finally the clamp from the battery terminal.

The charger should be placed as far from the battery as the DC cables allow. It must never be placed directly above the battery while charging, nor in an enclosed space, and it is important not to restrict ventilation. Also avoid allowing battery acid to drip onto the charger.

Yes, the charger is protected against reverse polarity. Once the battery is connected, the charger immediately detects the voltage and polarity. In case of incorrect connection, all status LEDs will flash and no spark will occur.

This Victron Energy Blue Smart IP65 charger is covered by a 5-year warranty.

The weight of this Victron Energy Blue Smart IP65 12V 25A charger is 1.9 kg.

The dimensions (height x width x depth) of this Victron Energy Blue Smart IP65 12V 25A charger are 75 x 140 x 240 mm.