SmartSolar MPPT 100/30 töltésszabályzó

The ultra-fast MPPT (Maximum Power Point Tracking) technology allows the SmartSolar MPPT 100/30 charge controller to optimize solar energy harvesting. It is particularly effective when light intensity changes continuously, such as under cloudy skies or in case of partial shading.

Up to 30 % higher energy harvest compared to PWM charge controllers.Up to 10 % higher energy harvest compared to slower MPPT charge controllers.Advanced maximum power point detection, even in the presence of multiple power points due to partial shading.

The SmartSolar MPPT 100/30 charge controller delivers a maximum conversion efficiency exceeding 98%. This high efficiency ensures optimal use of the energy captured by your solar panels.

No, the SmartSolar MPPT 100/30 charge controller does not require a cooling fan. Its design allows for efficient heat dissipation, enabling it to deliver maximum output current up to an ambient temperature of 40 °C without a fan.

The SmartSolar MPPT 100/30 controller integrates comprehensive electronic protections to ensure system safety and durability. These include:

Overheat protection and power reduction in case of high temperature.Protection against PV short-circuits.Protection against PV polarity reversal.Protection against PV reverse current.Protection against output short-circuits.

The SmartSolar MPPT 100/30 controller is designed to operate within a temperature range of -30 °C to +60 °C. It can deliver its full rated power up to an ambient temperature of 40 °C.

The maximum nominal charging current that the SmartSolar MPPT 100/30 charge controller can supply to the battery is 30 amperes (30 A).

The SmartSolar MPPT 100/30 controller's own consumption is 30 mA for a 12 V battery system and 20 mA for a 24 V battery system.

The SmartSolar MPPT 100/30 controller features advanced maximum power point tracking (MPPT) that efficiently manages partial shading conditions. In partial shading scenarios, multiple maximum power points may appear on the power-voltage curve. Victron Energy’s innovative algorithm ensures the controller always locks onto the optimal maximum power point, maximizing energy harvest.

Yes, the SmartSolar MPPT 100/30 controller has an internal temperature sensor. This sensor is used to compensate the absorption and float charge voltage based on the battery temperature, thereby optimizing the charging process.

The dimensions of the SmartSolar MPPT 100/30 controller are 130 mm (height) x 186 mm (width) x 70 mm (depth). Its weight is 1.3 kg.

The SmartSolar MPPT 100/30 controller is compatible with 12 V and 24 V battery systems. It features automatic voltage selection.

The SmartSolar MPPT 100/30 controller is compatible with a wide range of battery types, including:

AGM batteriesGel batteriesFlooded lead-acid batteriesLithium batteries (LiFePO4)It also features a recovery function for fully discharged Li-ion batteries with built-in disconnect function.

The SmartSolar MPPT 100/30 controller can handle a nominal solar panel power up to:

440 W for a 12 V battery system. 880 W for a 24 V battery system. If a higher PV power is connected, the controller will limit the input power to these values.

The SmartSolar MPPT 100/30 controller can accept a maximum open-circuit voltage from solar panels of 100 V.

The SmartSolar MPPT 100/30 controller is designed to handle a maximum solar panel short-circuit current of 35 A. It is critical not to exceed this value, as a higher PV short-circuit current could damage the controller.

Yes, you can use an external sensor for battery voltage and temperature. The SmartSolar MPPT 100/30 controller can communicate with a Smart Battery Sense or a BMV-712 Smart Battery Monitor via Bluetooth (VE.Smart Networking) to retrieve this data, enabling more accurate charging.

The SmartSolar MPPT 100/30 controller offers several connectivity options:

Built-in Bluetooth Smart: Enables wireless configuration, monitoring, and updates via the VictronConnect app on smartphone or tablet.VE.Direct port: For wired connection to a Color Control GX, other GX products, a PC, or other devices, providing extended monitoring via the Victron Remote Management (VRM) portal if a GX device is used.

The SmartSolar MPPT 100/30 controller has an IP43 protection rating for the electronic components and IP22 for the connection area. This means it is protected against solid objects larger than 1 mm and water splashes for the electronic components, and against solid objects larger than 12.5 mm and dripping water for the connection area.

The SmartSolar MPPT 100/30 controller power terminals are designed to accept cables with a maximum cross-section of 16 mm² (equivalent to AWG6).

Yes, the SmartSolar MPPT 100/30 controller has a fully discharged battery recovery function. It can initiate charging even if the battery has been discharged to zero volts. It can also reconnect to a fully discharged Li-ion battery with an integrated disconnect function.