Gniazdo 12 V z prostym przedłużaczem

The [BLUE SEA] 12 Volt Plug with Single Extension Socket is designed to provide a reliable 12V DC power solution in marine and wet environments. It safely and durably extends your auxiliary electrical network on board by combining a male plug and a female socket.

Yes, this product is specifically designed for marine and humid environments. It is manufactured with corrosion-resistant components and features moisture protection to ensure reliable performance at sea.

This connector is designed to operate with 12 Volt DC power systems.

The male plug is protected by an integrated 10-amp fuse, which limits the maximum current the system can deliver to 10A. Although the socket can support up to 15A, the fuse protection remains at 10A for the entire system.

Yes, the male plug is equipped with a 10-amp fuse that provides protection against electrical overloads, safeguarding your equipment and installation.

The male plug includes an "ON" LED indicator that lights up when the plug is powered, allowing easy verification of the power status.

The product is delivered with a robust 1.8-metre cable.

The wiring used is 18 AWG gauge, ensuring efficient conductivity for currents up to 10A.

The conductive components are made from nickel-plated copper alloy, providing excellent conductivity and increased resistance to corrosion, essential in marine environments.

A locking system with a rotating collar is integrated to securely hold the male plug in the socket, preventing unintentional disconnections caused by vibrations or movement.

Yes, the socket is fitted with a watertight cap that protects the contacts from moisture and debris when not connected to the male plug.

Yes, the unit is designed to withstand constant vibrations, a common factor in marine environments, thanks to robust components and large contact surfaces for stable electrical connections.

The product combines a male plug and a female socket. The male plug is usually ready to use with its wiring. The female socket requires wiring and installation on a surface.

It is recommended to ensure that the power supply is disconnected before any installation. Wiring must be done according to marine electrical standards, respecting polarity and using secure connections. The socket is designed to be mounted in a way that protects the rear connections from moisture.

The base is designed with internal strain relief devices for the wiring. Wires must be stripped and connected to the appropriate terminals of the base, respecting polarity (positive and negative), and connections must be tight to prevent loosening due to vibrations.

No, this socket is specifically designed for 12 V DC systems. Using it with 24 V could damage the socket, fuse, or connected devices.

No, this outlet should not be used for devices drawing more than 10 amps, as the integrated 10-amp fuse will trip to protect the circuit. This could also overload the wiring and components, even if the socket is rated at 15A.

The male plug is a standard 12V cigarette lighter type, making it compatible with most standard 12V cigarette lighter sockets or accessory sockets. The supplied female socket is also compatible with this type of plug.

The male plug is fitted with a moisture-proof sealing ring around the shaft. This gasket prevents water ingress and ensures a firm and reliable electrical contact, even in wet conditions.

Yes, both components (male plug and female socket) include internal strain relief mechanisms. This helps protect wire connections from mechanical stress and prevents disconnections or damage caused by cable tension.