Szynka zbiorcza 150 A – cztery bolce 1/4"-20 z pokrywą

The Blue Sea Systems 150 A common busbar, model 2307-BSS, is a key component for electrical distribution in marine environments. It centralizes and distributes electrical current in an organized and secure manner to multiple circuits or devices. With a 150-ampere capacity, it is ideal for managing low to medium power connections aboard your vessel.

This busbar is designed to manage electrical systems up to 150 amperes. This capacity makes it a reliable intermediate solution for power distribution in marine installations.

The cover included with the 2307-BSS busbar plays a crucial role in safety and protection. It provides additional protection against:

Accidental contact with electrical connections.Water splashes, humidity, and debris.Potential short circuits caused by external objects.This contributes to the overall safety of the installation and the longevity of the system.

This busbar is equipped with four connection studs. Each stud has a 1/4"-20 size, ensuring robust and secure connections for your electrical cables.

Yes, absolutely. Specifically designed for marine applications, the 2307-BSS busbar is made from corrosion-resistant materials such as tinned copper. Additionally, it is certified to comply with international marine standards, ensuring its reliability and durability in harsh conditions.

The 2307-BSS busbar can support voltages up to 48V DC and 300V AC. This makes it compatible with most standard marine electrical systems, whether 12V, 24V or other configurations.

The ISO 8846 certification is an international standard for protection against ignition of surrounding flammable gases. This busbar is ISO 8846 certified, meaning it is designed to minimize risks of sparks or overheating that could ignite combustible vapors or gases. This certification is particularly important for installations in hazardous areas such as engine compartments on vessels, ensuring enhanced safety.

Yes, thanks to its ISO 8846 certification for protection against ignition of flammable gases, the 2307-BSS model is particularly suited and recommended for installation in engine compartments or other areas where the presence of flammable gases is a concern. This ensures optimal safety in these critical environments.

The busbar is typically secured using screws. It has mounting holes provided for this purpose in its base. It is recommended to use appropriately sized stainless steel screws (often #8 screws) for a secure and corrosion-resistant mounting, ensuring the bar is attached to a flat and stable surface.

The 1/4"-20 studs are designed to accept corresponding eyelet terminals at the end of your electrical cables. You can connect cables of different cross-sections, provided they are fitted with the appropriate terminals for optimal and secure electrical contact. It is critical to respect the maximum 150 A rating of the busbar when selecting cable cross-sections.

Yes, it is strongly recommended to use crimp terminals suitable for the size of the studs (1/4" or M6) and the diameter of your cables. The terminals must be properly crimped onto the cables to ensure a reliable electrical connection, low resistance, and good mechanical strength. The use of washers and nuts (provided or not) is also essential for secure tightening.

While the cover provides protection against water splashes, for increased resistance to moisture, it is advisable to install the busbar in a sheltered location or to use marine-grade connectors and cables with appropriate insulation. Applying dielectric grease to the connections can also help prevent corrosion caused by moisture.

Yes, several precautions must be taken:

Disconnect the power: Ensure the electrical system is fully de-energized before any work.Respect polarity: Even with a common busbar, connect the correct cables (positive or negative) to the designated terminals if using multiple busbars.Tighten properly: Firmly tighten the stud nuts to ensure good electrical contact, but do not overtighten to avoid damaging the studs.Protect cables: Use sleeves or conduits to protect cables if necessary.Ventilation: Ensure adequate ventilation around the busbar to dissipate heat.

The cover is generally designed to be easily removable. It clips onto or unclips from the sides of the busbar base. Simply apply slight pressure or gently lift at the attachment points to remove or reattach it. This provides easy access to the studs for cable installation or maintenance.

Yes, this busbar is fully compatible with 12V DC and 24V DC marine electrical systems. Its maximum rated voltage of 48V DC makes it suitable for these common setups, allowing reliable power distribution for a wide range of onboard equipment.

Yes, the 2307-BSS busbar is designed to be used on a wide range of vessels, whether motorboats or sailboats. Its robustness, resistance to marine environments, and ISO 8846 certification make it suitable for all applications requiring secure and organized electrical distribution in a nautical environment.

Yes, Blue Sea Systems products are designed to integrate seamlessly into a coherent marine electrical architecture. This busbar can be used alongside other Blue Sea Systems components such as circuit breakers, fuses, switches, or other busbars to create a complete and optimized electrical system.

This busbar is primarily designed for DC (direct current) systems up to 48V. However, it is also rated for AC (alternating current) systems up to 300V. It is critical not to mix AC and DC circuits on the same common busbar to avoid any risk of short-circuit or interference. If you need to distribute both AC and DC, it is recommended to use separate busbars for each type of current.