Wyłącznik szybkozłączny z przyciskiem resetującym – 15 A

A circuit breaker with quick-connect terminals is an electrical protection device designed to be easily installed and removed from a circuit. It provides protection against overcurrents and short circuits, and typically resets after tripping, eliminating the need to replace a fuse.

The primary function of the BLUE SEA 7056-BSS circuit breaker is to protect marine electrical circuits from overcurrent and overloads. It serves as a practical alternative to traditional fuses, tripping in case of a fault and being resettable via a push-button.

This BLUE SEA 7056-BSS circuit breaker has a rated current of 15 amperes (15 A). This means it is designed to protect circuits where the normal current does not exceed 15 A and will trip if the current exceeds this value significantly.

The 7056-BSS circuit breaker provides similar protection against overcurrents as a traditional fuse. However, its main advantage is that it can be reset with a simple push-button after tripping, whereas a fuse must be replaced once it has blown. This makes it more practical and cost-effective in the long run.

No, the BLUE SEA 7056-BSS circuit breaker is a "reset-only" breaker. It is designed to trip automatically in case of overload and must be manually reset afterwards. It has no manual circuit interruption function and must not be used as an on/off switch.

The 7056-BSS circuit breaker is a simple thermal circuit breaker, ideal for secondary or accessory circuits. Magnetic-hydraulic circuit breakers provide more precise protection and are less sensitive to ambient temperature variations, making them suitable for main circuits or critical loads requiring high tripping accuracy.

Yes, the BLUE SEA 7056-BSS circuit breaker is specifically designed for protecting marine electrical circuits. Blue Sea Systems products are known for their robustness and reliability in marine conditions.

This circuit breaker is ideal for secondary circuits or accessories where simple thermal protection and quick reset are priorities. It can be used to protect equipment such as lighting, bilge pumps, radios, or other low-power electronic devices requiring 15-amp protection.

This circuit breaker features a quick-connect design, which simplifies its installation. It is typically equipped with quick-connect terminals (such as spade connectors or screw terminals) that allow for simple and secure cable connections in the circuit.

Installing this quick-connect circuit breaker is designed to be straightforward. Basic marine electrical tools such as a crimping tool for terminals, a screwdriver (if using screw terminals), and wire cutters are typically sufficient. No specialized tools are required beyond standard electrical wiring equipment.

Yes, its quick-connect design and compact dimensions make it easy to integrate into existing electrical panels or junction boxes. It can be used to replace defective fuses or circuit breakers of the same rating (15 A) in an existing installation.

Yes, cutting templates and dimensional drawings are usually provided or available to facilitate installation and integration into a panel. These documents help ensure precise fitting during circuit breaker assembly.

The BLUE SEA 7056-BSS circuit breaker is compatible with 12 V and 24 V marine electrical systems. It is designed to operate efficiently within these common onboard voltage ranges.

Yes, this circuit breaker is designed as a direct replacement for 15 A fuses for overcurrent protection. It can replace a 15 A fuse in most marine applications, offering the advantage of easy reset without replacement.

Yes, as a Blue Sea Systems product, the 7056-BSS circuit breaker is designed to integrate seamlessly with other brand components, such as busbars, distribution panels, or fuse blocks, to create a consistent and reliable marine electrical system.

Yes, as long as the electronic device requires 15 amp protection and operates on a 12 V or 24 V system, this circuit breaker is suitable. It is ideal for protecting equipment such as VHF radios, GPS units, fishfinders, or lighting systems.

This circuit breaker provides reliable protection against overcurrents and overloads. It is designed to detect excessive current in the circuit and trip automatically to interrupt the power supply, thereby protecting equipment and wiring from damage.

The 7056-BSS circuit breaker uses a thermal mechanism. In the event of an overload, excessive current causes an internal component to heat up, expand, and trigger the breaker mechanism, opening the circuit. Once the issue is resolved and the breaker has cooled, it can be manually reset using the push-button.

When the circuit breaker trips due to an overload, the pushbutton usually pops out, indicating that the circuit has been interrupted for safety reasons. Before resetting it, it is recommended to identify and resolve the cause of the overload to prevent another trip.

Yes, although primarily designed for thermal protection against overloads, a circuit breaker like the 7056-BSS also provides short-circuit protection. A short circuit is an extreme form of overcurrent that causes rapid tripping of the circuit breaker to protect the electrical system.