ECLIPSE DL55, Downlight, White + RGB (Black Finish) - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Oszczędź 9%

Garmin

010-04541-00

ECLIPSE DL55, plafonnier biały + RGB, wykończenie czarne

Le downlight Garmin ECLIPSE DL55 offre un éclairage marin polyvalent avec des LED blanches (5000 K) et RGB, adapté aux installations intérieures et extérieures grâce à son indice IP68. Conçu pour les systèmes 12 V, il se contrôle via un interrupteur simple ou un ECLIPSE Command Center pour une gestion avancée. Inclus : ressorts de fixation pour installation intérieure.

Prix publicBénéficier du tarif pro

602,34 PLN

602,34 PLN ~~664,97 PLN~~

Cena brutto Dostawa obliczana w momencie płatności.

Dostępny

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Napięcie pracy	12
Typowe zużycie energii	4 W
Temperatura barwowa	5000.0
Średnica otworu montażowego	50.8
Głębokość wnęki montażowej	21.2
Średnica zewnętrzna (mm)	64.0
Wysokość	3.5
Główny materiał korpusu	Aluminium
Stopień ochrony IP	IP68
Kompatybilny z ściemniaczem	Oui
Body Diameter Rear Mm	37.0
Color Modes	Blanc, Cycle RGB, Pause couleur
Control Compatibility	Interrupteur On/Off, ECLIPSE Command Center
Zalecany prąd znamionowy bezpiecznika	Approprié
Wymagany bezpiecznik	Oui
Typ montażu	Encastré
Max Power Consumption Current A	0.4
Max Voltage Drop Percent	3
Operating Voltage Range Vdc	10-15
Typ produktu	Downlight
Total Height Mm	51.5
Typical Current Draw A	0.33

Description détaillée

Downlight Garmin ECLIPSE DL55 w czarnym wykończeniu to wszechstronne oświetlenie LED przeznaczone do montażu wewnątrz i na zewnątrz jachtu. Oprawa łączy białe światło (5000 K) z pełnym spektrum kolorów RGB, umożliwiając tworzenie różnych nastrojów na pokładzie. Solidna konstrukcja i stopień ochrony IP68 zapewniają odporność na trudne warunki morskie, pozwalając na instalację w miejscach narażonych na wilgoć, z wyłączeniem zanurzenia ciągłego.

Konstrukcja i specyfikacja techniczna

DL55 wyposażony jest w cztery diody LED o mocy 3 W każda (czerwona, zielona, niebieska i biała), co daje średnią moc świetlną 4,8 W przy maksymalnym poborze prądu 0,4 A przy napięciu 12 V. Przeznaczony do zasilania z instalacji 12 VDC na jachtach, z zakresem napięcia roboczego od 10 do 15 VDC. Płytki montażowe o głębokości zaledwie 21,2 mm i średnicy otworu 50,8 mm ułatwiają montaż w ograniczonej przestrzeni. Konstrukcja obejmuje trwały korpus aluminiowy z powłoką anodową i lakierowaniem proszkowym oraz szklaną szybę, zapewniając odporność na środowisko morskie.

Opcje sterowania i wszechstronność montażu

Downlight ECLIPSE DL55 może być sterowany za pomocą prostego włącznika/wyłącznika, pozwalającego na włączenie światła białego lub cykliczną zmianę kolorów. Do zaawansowanego sterowania kompatybilny jest z ECLIPSE Command Center (sprzedawanym osobno), umożliwiającym sterowanie z poziomu kompatybilnych ekranów wielofunkcyjnych (MFD), urządzeń inteligentnych lub chwilowego włącznika. Do montażu mechanicznego dostarczane są sprężynowe klipsy ze stali nierdzewnej. W przypadku montażu zewnętrznego lub w miejscach narażonych na wilgoć zaleca się użycie odpowiedniego uszczelniacza/kleju morskiego, zdemontowanie klipsów i czarnej uszczelki w celu zapewnienia optymalnej szczelności. Downlight objęty jest 3-letnią gwarancją.

Documentations

Type	Nom
	Notice d'installation - Guide d'installation Downlight Garmin Eclipse DL55 (EN)

Avis de l'expert

« Technical analysis of the Garmin ECLIPSE DL55 marine downlight »

The Garmin ECLIPSE DL55 is a relevant choice for onboard lighting, particularly for 12 V systems. Its dual white and RGB lighting versatility makes it adaptable to various ambiances, whether for functional or decorative lighting. This downlight is especially suited to areas requiring enhanced waterproofing, such as cockpits or bathrooms, thanks to its IP68 rating. Note that it is not designed for prolonged submersion, making it suitable for surface applications only.

Installation is simplified by a two-wire wiring system. For indoor mounting, the supplied spring clips provide a quick solution. However, for outdoor installations or areas regularly exposed to water, using marine sealant is mandatory to ensure durability and waterproofing. This requires removing the original clips and gasket beforehand. This difference in mounting method is critical to ensure the product's longevity in marine environments. Compatibility with the ECLIPSE Command Center unlocks more advanced control options via MFDs or smart devices, integrating with the Garmin navigation system. Without this control center, basic white and RGB cycling control remains functional via a simple switch.

This model is an effective alternative to traditional monochrome lighting solutions, offering color flexibility without the installation complexity of more advanced lighting systems. It is ideal for owners seeking an aesthetic and functional lighting upgrade without a complete overhaul of the boat's electrical system. Its shallow flush-mount depth is a major advantage for installations in ceilings or thin bulkheads where space behind the surface is limited.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

ECLIPSE DL55, plafonnier biały + RGB, wykończenie czarne

602,34 PLN

602,34 PLN ~~664,97 PLN~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What lighting colors are available on the Garmin ECLIPSE DL55 downlight?

The Garmin ECLIPSE DL55 downlight provides versatile LED lighting, combining white light (5000 K) and a full RGB color spectrum. This allows you to create various onboard lighting moods on your boat.

What is the luminous output and power consumption of the ECLIPSE DL55 downlight?

The DL55 downlight is fitted with four 3 W LEDs (one red, one green, one blue, and one white). It delivers an average luminous power of 4.8 W, with a maximum current draw of 0.4 A at 12 V. Typical current draw is approximately 0.33 A at 12 volts.

Is the ECLIPSE DL55 downlight designed for indoor or outdoor use?

Yes, the ECLIPSE DL55 downlight is fully sealed and can be installed both indoors and outdoors. It is suitable for installation in wet areas but is not designed for continuous submersion in water.

What is the protection rating (IP) of the Garmin ECLIPSE DL55 downlight?

The Garmin ECLIPSE DL55 downlight has an IP68 protection rating. This ensures its resistance to demanding marine environments and allows installation in wet areas without risk of permanent submersion.

What are the materials used in the construction of the Garmin ECLIPSE DL55 downlight?

The DL55 downlight housing is built with a durable anodized aluminum body with electrophoretic and thermo-lacquered coating, and a glass front. These materials provide robustness suitable for marine environments.

What is the color temperature of the white lighting on the DL55?

The white lighting of the Garmin ECLIPSE DL55 downlight has a color temperature of 5000 K.

How is the RGB color cycle of the DL55 controlled?

When the DL55 downlight is turned on in white via a switch, toggling the switch will enter the color cycle. Another toggle will pause the cycle. To reset the downlight, simply turn it off for two seconds.

What are the required cut-out dimensions and depth for installing the DL55 downlight?

The DL55 downlight requires a cutout diameter of 50.8 mm (2.00 inches) and has a shallow flush-mount profile of 21.2 mm (0.834 inches). It is recommended to cut the hole slightly undersized and then file it to final size for a precise fit.

Can the ECLIPSE DL55 downlight be installed on a non-flat surface?

No, the ECLIPSE DL55 downlight must be mounted on a flat surface and not a curved one. The mounting surface must also be suitable for this type of luminaire.

How to install the DL55 downlight in interior areas?

For indoor installations, use the supplied spring clips. Gently pull the spring clips backward and insert the light fixture into the hole, releasing the spring clips once the fixture is in position.

How to install the DL55 downlight in outdoor or wet areas?

For outdoor installations or in damp areas, it is recommended to secure the light fixture using appropriate marine sealant/adhesive. Remove the spring clips and the black gasket from the fixture, then apply a small amount of adhesive around the glass lens. Push the fixture into place while slightly rotating it to evenly distribute the adhesive. Clean off any excess adhesive with a soft cloth, soap, and water, without using chemical cleaners.

What electrical precautions should be taken before installing the DL55 downlight?

Before any installation, always ensure the boat's power source and battery are disconnected or isolated. Electrical and mechanical installation should be performed by a qualified professional. The DL55 downlight is designed to operate only with boats equipped with 12V DC systems, with an operational voltage range of 10 to 15V DC. Do not connect voltages outside this range or directly to AC power.

What is the recommended cable size for installing the DL55 downlight?

It is important to use a properly sized cable to ensure a voltage drop of less than 3% at the last fixture in the chain.

Can the ECLIPSE DL55 downlight heat up during operation?

Yes, the back of the light fixture can become hot to the touch. The mounting surface must be suitable for this type of fixture installation.

With which electrical systems is the Garmin ECLIPSE DL55 downlight compatible?

The ECLIPSE DL55 downlight is specifically designed to operate with 12V DC boat electrical systems ONLY. Its operating voltage range is 10 to 15V DC.

Is the DL55 downlight compatible with dimmers or third-party controllers?

No, the ECLIPSE DL55 downlight is not designed to be connected to third-party lighting control products or dimmers. It must be used with a simple on/off switch or with the ECLIPSE Command Center control unit.

What control options are available for the ECLIPSE DL55 downlight?

The ECLIPSE DL55 downlight can be controlled in two ways: either with a simple on/off switch, or with the ECLIPSE Command Center control unit for advanced features.

Can different types of downlights be mixed on the same Command Center output zone?

No, monochrome and bicolour downlights must not be added to the same output zone of the ECLIPSE Command Center. Each type of luminaire requires a separate output zone.

What is the warranty duration for the Garmin ECLIPSE DL55 downlight?

The Garmin ECLIPSE DL55 downlight is covered by a three-year warranty from the original purchase date, covering manufacturing defects.

What conditions can void the warranty for the Garmin ECLIPSE DL55 downlight?

The warranty may be voided in cases of misuse, abuse, incorrect installation, neglect, improper shipping, damage caused by disasters (e.g., fire, flood, storm, and lightning), installation by unqualified personnel, unauthorized repair or modification, or use of non-approved installations. Failure to comply with all installation, maintenance, and usage guidelines in the documentation also voids the warranty.