ECLIPSE SNL100, Neon Flex Light, Blue, 2.5m - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Oszczędź 7%

Garmin

010-04490-00

ECLIPSE SNL100, neonowy pasek LED niebieski, 2,5 m

Ce bandeau flexible LED Garmin ECLIPSE SNL100 bleu de 2,5m offre un éclairage marin sans points visibles, résistant aux UV et certifié IP68 pour les systèmes 12V. Issu de la gamme ECLIPSE SNL100, il se distingue par sa capacité à être découpé sur mesure tous les 25 mm pour une intégration précise. Le produit est fourni avec un kit de scellement et des clips de fixation en acier inoxydable.

Prix publicBénéficier du tarif pro

452,67 PLN

452,67 PLN ~~487,11 PLN~~

Cena brutto Dostawa obliczana w momencie płatności.

Dostępny

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Typ produktu	Bandeau lumineux flexible
Typowe zużycie energii	12.5
Kolor światła	Bleu
Stopień ochrony IP	IP68
Kompatybilny z ściemniaczem	Oui
Gęstość diod LED na metr	60.0
Wiązka regulowana	Non
Kąt wiązki	180
Bend Orientation	Horizontal
Kolor / wykończenie	Bleu
Materiał obudowy	Polymère résistant aux UV
Illumination Effect	Continu, sans points visibles, effet néon
Środowisko montażowe	Intérieur, Extérieur, Zones humides
Typ montażu	Montage en surface
Zintegrowany wyłącznik	Non
Length Meters	2.5
Max Current Per Meter	0.5
Minimalny promień gięcia	120
Zakres napięcia pracy	10-15
Power Consumption Typical Per Meter	5
Wymiary produktu (D x S x W)	2500 x 16 x 22
Odporność na UV	Oui

Description détaillée

Przeznaczony do oświetlenia wnętrz i zewnętrznych na jednostkach pływających, elastyczny pasek LED Garmin ECLIPSE SNL100 zapewnia ciągłe i bezpunktowe oświetlenie, imitujące estetykę neonu. Ten model o długości 2,5 metra emituje światło niebieskie i jest zoptymalizowany do systemów elektrycznych 12V, obsługując zakres napięcia 10–15V DC. Gęstość 60 LED na metr gwarantuje równomierne rozproszenie światła.

Integracja i parametry elektryczne

Każdy metr Garmin ECLIPSE SNL100 zużywa około 5 W w typowym użytkowaniu i maksymalnie 0,5 A. W pełni zalany i zalutowany układ, wyposażony w bezpunktowy dyfuzor, zapewnia odporność na warunki morskie. Posiada klasę szczelności IP68, co oznacza całkowitą ochronę przed pyłem i tymczasowe zanurzenie, choć nie jest przeznaczony do stałego zanurzenia. Materiał odporny na promieniowanie UV zapewnia długą żywotność nawet przy bezpośrednim nasłonecznieniu, choć zaleca się instalację z dala od intensywnego światła słonecznego.

Elastyczność i montaż

Elastyczna konstrukcja paska pozwala na dopasowanie go do zakrzywionych powierzchni z minimalnym promieniem gięcia 120 mm w osi pionowej. Nie należy go zginąć w osi poziomej ani skręcać. Koncepcja "cięcia na wymiar" oferuje dużą elastyczność: pasek można ciąć co 25 mm i uszczelniać za pomocą dołączonego zestawu silikonowego, umożliwiając precyzyjne dostosowanie długości. Montaż odbywa się za pomocą stalowych śrubowych klipsów nierdzewnych, mocowanych co 300 mm, z dodatkowymi klipsami na ostrych zakrętach. Ten model jednokolorowy (niebieski) wyróżnia się na tle wersji dwukolorowych lub RGB z serii ECLIPSE SNL100 prostotą instalacji w układzie 2-przewodowym, wymagając jedynie bezpośredniego włącznika/wyłącznika, w przeciwieństwie do modeli RGB, które wymagają ECLIPSE Command Center do sterowania przez MFD lub urządzenie inteligentne.

Documentations

Type	Nom
	Notice d'installation - Guide d'installation des bandeaux lumineux flexibles ECLIPSE SNL100

Avis de l'expert

« Garmin ECLIPSE SNL100 flexible lighting: flexibility and neon effect for 12V »

The Garmin ECLIPSE SNL100 flexible LED strip in 2.5 m blue is a versatile lighting solution for recreational boaters seeking to combine aesthetics and functionality. Its "neon flex" design with no visible points creates continuous lighting effects, ideal for courtesy lighting in cockpits, under coachroofs, or to highlight interior cabin lines. It is particularly suited to owners of mid-sized sailboats and powerboats looking for a discreet, integrated supplementary lighting solution.

The main advantage of this model lies in its flexibility and ability to be cut to size every 25 mm, a feature that greatly simplifies adaptation to specific spaces. The provided sealing kit is essential for maintaining waterproofing after cutting. Installation is made easier with stainless steel mounting clips, but it is crucial to respect the minimum 120 mm bending radius on the vertical axis and never bend it horizontally or twist it to preserve its structural and optical integrity. For single-color installations like this blue model, a simple 12V switch connection is sufficient, offering ease of integration. Although it is IP68 rated, it is important to note that it is not designed for permanent immersion, and it should be positioned in areas where it will not be constantly underwater.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

ECLIPSE SNL100, neonowy pasek LED niebieski, 2,5 m

452,67 PLN

452,67 PLN ~~487,11 PLN~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the color of this Garmin ECLIPSE SNL100 LED strip?

This specific model of the Garmin ECLIPSE SNL100 LED panel emits a blue light.

What is the total length of the light strip?

The Garmin ECLIPSE SNL100 LED strip has a length of 2.5 meters.

Can the ECLIPSE SNL100 LED strip light be installed outdoors on a boat?

Yes, the ECLIPSE SNL100 LED strip is fully encapsulated and potted, making it suitable for installation in both indoor and outdoor environments, including damp areas.

What is the IP rating of the LED strip light?

The LED strip has an IP68 rating. This ensures full protection against dust and resistance to temporary immersion. It is not, however, designed for permanent submersion.

What is the power consumption of this LED strip?

Each meter of the Garmin ECLIPSE SNL100 light strip consumes approximately 5 watts in typical use, and up to a maximum of 0.5 amperes per meter.

What is the required supply voltage for the ECLIPSE SNL100 LED strip?

The LED strip is designed to operate exclusively with 12V DC electrical systems. It accepts a voltage range from 10 to 15V DC.

Can I connect this LED strip to a 24V electrical system?

No, the ECLIPSE SNL100 LED light bar is specifically designed to operate with 12V DC systems only. It must not be connected to voltages outside the 10–15V DC range or to AC power.

Can the LED strip be cut to a shorter length?

Yes, the LED strip can be cut at specific marked points. It is important to use scissors and follow the cutting method indicated in the installation guide to ensure proper waterproofing. A sealing kit is provided for the cut ends.

How should I handle the light strip during installation to avoid damaging it?

Never unroll it by pulling one end. Do not drop it or twist it. Do not apply excessive pressure. Do not pull, stretch, twist, or bend it on the vertical axis. For lengths over one meter, it is recommended to use two people for installation. Always unroll it flat and in a straight line.

Is the light bar flexible and can it be bent?

Yes, the LED strip is flexible and can adapt to curved surfaces. It has a minimum bending radius of 120 mm (4.724 inches) on the vertical axis. It must not be bent on the horizontal axis or twisted.

Where should I not install the ECLIPSE SNL100 LED strip light?

Although the material is UV-resistant, it is recommended not to install the LED strip in areas exposed to intense direct sunlight to preserve its longevity. It is not designed for permanent submersion in water either.

Is the LED strip UV-resistant?

Yes, the LED strip is made from UV-resistant material, which helps preserve its longevity even under direct sunlight. However, it is recommended to install it out of direct intense sunlight.

How to connect the LED strip to the power supply?

For a single-color LED strip like this one, connect the RED wire of the strip to the 10.5-15V power source and the BLACK wire to ground (GND). It is recommended to install an appropriate fuse for the circuit.

Is this LED light bar compatible with an ECLIPSE Command Center?

Yes, the ECLIPSE SNL100 single-color LED strip can be connected to an ECLIPSE Command Center. For a complete installation and control via the Command Center, consult the Command Center installation manual.

How many LEDs are there per meter on this LED strip?

The Garmin ECLIPSE SNL100 LED strip has a density of 60 LEDs per meter, ensuring uniform light diffusion.

Does the light bar provide continuous lighting without visible light points?

Yes, the ECLIPSE SNL100 LED strip is designed to provide continuous, seamless illumination without visible points, mimicking neon aesthetics.

What is the minimum bend radius for this LED strip?

The minimum bending radius for the ECLIPSE SNL100 LED strip is 120 mm (4.724 inches) on the vertical axis. It must not be bent on the horizontal axis nor twisted.

Is this LED strip designed to be permanently submerged in water?

No, although the LED strip has an IP68 rating and can be installed in wet areas, it is not designed to be permanently submerged in water. It is resistant to temporary immersion.

Should a qualified professional install the LED strip light?

Yes, a qualified professional should carry out the electrical and mechanical installation of the light strip to ensure proper and safe installation.

What are the physical dimensions of the light strip (excluding length)?

The light strip has a width of approximately 16 mm (0.622 in) and a height of approximately 22 mm (0.862 in) at its widest point. The illuminated section has a thickness of approximately 14 mm (0.547 in) and the base 8 mm (0.313 in).