ECLIPSE SNL100, Neon Flex Light, Blue and White, 5m - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Oszczędź 10%

Garmin

010-04497-00

ECLIPSE SNL100, neonowy pasek LED Flex niebieski i biały, 5 m

Le Garmin ECLIPSE SNL100 est un ruban lumineux flexible de 5 mètres, offrant un éclairage LED bleu et blanc sans points visibles, idéal pour une intégration discrète en milieu marin. Conçu pour les installations intérieures et extérieures, il bénéficie d'une protection IP68 et est fabriqué en matériau résistant aux UV, assurant une durabilité sur les systèmes 12V. Faisant partie de la collection ECLIPSE, il peut être coupé tous les 25 mm et contrôlé via interrupteur ou, pour des fonctions avancées, via un ECLIPSE Command Center. La boîte inclut la bande lumineuse ECLIPSE SNL100, un kit de scellement avec embouts, et un pack de clips de fixation.

Prix publicBénéficier du tarif pro

990,94 PLN

990,94 PLN ~~1.107,17 PLN~~

Cena brutto Dostawa obliczana w momencie płatności.

Dostępny

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Typ produktu	Ruban lumineux LED
Typowe zużycie energii	30W
Temperatura barwowa	5000.0
Kolor światła	Bleu et Blanc
Stopień ochrony IP	IP68
Wiązka regulowana	Non
Kolor / wykończenie	Blanc
Materiał obudowy	Silicone résistant aux UV
Typ montażu	Montage en surface
Zintegrowany wyłącznik	Non
Zakres napięcia pracy	10-15V

Description détaillée

Zaprojektowany do wszechstronnego oświetlenia morskiego, elastyczny neonowy pasek LED ECLIPSE SNL100 marki Garmin w wersji niebiesko-białej o długości 5 metrów stanowi rozwiązanie bez widocznych punktów świetlnych. Należący do kolekcji ECLIPSE model nadaje się do instalacji wewnętrznych i zewnętrznych, w tym w strefach wilgotnych, dzięki całkowicie wodoszczelnej konstrukcji (IP68).

Parametry techniczne i wydajność

SNL100 wyróżnia się elastycznością, umożliwiającą dopasowanie do konturów i zakrzywionych powierzchni jednostek pływających. Zintegrowano w nim 60 diod LED na metr, zapewniających podwójne oświetlenie w kolorze niebieskim i białym (5000K dla białego). Zasilany z systemów 12V DC (zakres 10–15V DC), pobiera maksymalnie 0,5 A/metr i średnio 6 W/metr. Konstrukcja wykonana z materiału odpornego na promieniowanie UV gwarantuje trwałość w środowisku morskim. W przeciwieństwie do oświetlenia stałego lub sztywnego, SNL100 umożliwia dyskretną i spersonalizowaną integrację wzdłuż pawęży, pod hard-topami lub w kabinach.

Montaż i elastyczność

Pięciometrowy pasek neonowy można ciąć co 25 mm, co pozwala na precyzyjne dopasowanie do przestrzeni montażowej. Każdy odcięty koniec należy zabezpieczyć za pomocą dołączonego zestawu silikonowego, aby zachować szczelność. Minimalny promień gięcia wynosi 120 mm w osi pionowej, co umożliwia dopasowanie do zakrzywionych powierzchni bez uszkodzenia wewnętrznej taśmy LED. Instalacja elektryczna jest uproszczona dzięki okablowaniu trójżyłowemu w wersji dwukolorowej. Sterowanie może odbywać się za pomocą włącznika, kompatybilnego MFD lub urządzenia inteligentnego, wymagając w dwóch ostatnich przypadkach zastosowania ECLIPSE Command Center. Dla instalacji bardziej złożonych lub scenariuszy dynamicznego oświetlenia ECLIPSE Command Center, choć nie dołączony w zestawie, umożliwia pełne wykorzystanie możliwości produktów z serii ECLIPSE, w tym zarządzanie różnymi strefami świetlnymi lub integrację z innymi akcesoriami ECLIPSE.

Documentations

Type	Nom
	Notice d'installation - Guide d'installation ECLIPSE SNL100 Neon Flex (EN)

Avis de l'expert

« Flexible and waterproof marine ambient lighting for discreet integration »

The Garmin ECLIPSE SNL100 LED light strip is a particularly suitable supplementary lighting solution for marine installations requiring discreet visual integration and high environmental protection. Its IP68 rating, combined with UV-resistant materials, makes it a reliable choice for areas exposed to spray or splashes, such as coamings, undersides of T-tops, or cockpit side decks. However, it is critical to note that it is not designed for permanent submersion, which must be considered during installation planning.

The practical value of this SNL100 lies in its ability to provide indirect and uniform lighting, without the discrete light points characteristic of classic LED strips. Its flexibility, with a minimum bending radius of 120 mm on the vertical axis, allows it to follow complex curves of hulls or superstructures where rigid fixtures would be unsuitable. This feature makes it ideal for creating ambient lighting or marking zones without disrupting the boat's overall aesthetics. It is best suited for medium to large sailboats seeking customized ambient lighting.

Regarding installation, while the 3-wire wiring for the bicolor model is relatively straightforward, the ability to cut the strip every 25 mm requires careful sealing of the ends using the provided silicone kit. Failure to do so can compromise waterproofing and product durability. Using two people is recommended for lengths exceeding 1 meter to avoid twists or kinks. For advanced control, particularly via an MFD or mobile app, integration with an ECLIPSE Command Center is essential, adding complexity and additional cost to the overall system but greatly expanding lighting management possibilities. Without this control center, the SNL100 functions as a simple bicolor strip controlled by an on/off/on switch. It is imperative not to wire both the blue and white channels to activate simultaneously via a single switch; instead, use a three-position switch (blue/off/white) or the ECLIPSE Command Center.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

ECLIPSE SNL100, neonowy pasek LED Flex niebieski i biały, 5 m

990,94 PLN

990,94 PLN ~~1.107,17 PLN~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the Garmin ECLIPSE SNL100 LED light strip?

The Garmin ECLIPSE SNL100 is a flexible "Neon Flex" type light strip designed for marine lighting. It provides LED illumination without visible hotspots and is suitable for indoor and outdoor installations on boats, including in damp areas.

What lighting colors are available for this LED strip model?

This specific model of the ECLIPSE SNL100 LED light strip provides dual illumination in blue and white colors.

What is the total length of the ECLIPSE SNL100 LED light strip?

The Garmin ECLIPSE SNL100 LED light strip has a total length of 5 meters.

Is the ECLIPSE SNL100 LED light bar UV-resistant?

Yes, the ECLIPSE SNL100 LED light strip is made from UV-resistant material, ensuring durability in a marine environment. However, it should not be installed in areas exposed to direct sunlight.

How many LEDs per meter does the ECLIPSE SNL100 LED strip have?

The ECLIPSE SNL100 LED strip integrates 60 LEDs per meter, providing uniform lighting without visible hotspots.

What is the color temperature of the white lighting on the strip?

The white lighting provided by the ECLIPSE SNL100 LED strip has a color temperature of 5000K, which corresponds to a cold, bright white.

What is the electrical consumption and average power per meter for this strip?

The ECLIPSE SNL100 LED strip has a maximum consumption of 0.5 A per meter and an average power draw of approximately 5 Watts per meter for each channel (blue or white).

Can this LED strip be installed outdoors or in wet areas on a boat?

Yes, the ECLIPSE SNL100 tape is fully waterproof (IP68) and designed for installation both inside and outside, including in damp areas of a vessel. It is not, however, designed for permanent submersion in water.

Can I cut the ECLIPSE SNL100 LED light strip to the desired length?

Yes, the LED strip can be cut every 25 mm to fit precisely in the installation space. Cutting points are marked on the strip to make this operation easier.

How to ensure waterproofing after cutting the LED light strip?

After cutting the tape to the desired length, each cut end must be sealed with the supplied silicone kit. It is recommended to follow the detailed steps in the installation guide to ensure proper waterproofing and prevent LED discoloration.

What important precautions should I take before installing the LED strip?

Before any installation, ensure that the boat's power source and the battery are disconnected or isolated. It is also recommended that a qualified professional performs the electrical and mechanical installation. Do not unroll the tape by pulling it from one end and avoid twisting it or applying excessive pressure.

What is the minimum bending radius of the ECLIPSE SNL100 LED light strip?

The ECLIPSE SNL100 LED strip has a minimum bending radius of 120 mm (4.724 inches) on the vertical axis. It must not be bent on the horizontal axis or twisted to avoid damaging the internal LED strip.

Is it possible to turn on both the blue and white channels of this bicolor LED strip simultaneously?

No, it is important not to wire the blue and white channels so that they light up simultaneously. The strip is designed to use one channel at a time, via an On/Off/On switch or a compatible controller.

What are the dimensions of the ECLIPSE SNL100 light strip profile?

The ECLIPSE SNL100 LED strip has a width of 16 mm and a height of 22 mm. These dimensions are critical when planning its integration along the contours of your vessel.

Is it necessary to hire a professional to install this LED strip light?

It is strongly recommended that a qualified professional carry out the electrical and mechanical installation of the ECLIPSE SNL100 LED strip to ensure proper and safe implementation, and compliance with maritime standards.

Where should I not install the ECLIPSE SNL100 LED strip light?

Although the tape is UV-resistant, it must not be installed in areas exposed to strong direct sunlight. Additionally, it is not designed to be permanently submerged in water, despite its IP68 waterproof rating.

What is the required supply voltage for the ECLIPSE SNL100 LED strip?

The ECLIPSE SNL100 LED light bar is designed to operate exclusively with 12V DC boat systems. It can operate within a voltage range of 10 to 15V DC.

Is the LED light strip compatible with AC power systems?

No, the ECLIPSE SNL100 LED light strip is not compatible with AC power systems. It must be connected only to a 12V direct current (DC) source.

Can the LED strip be connected to an ECLIPSE Command Center?

Yes, the ECLIPSE SNL100 LED strip can be connected and controlled via an ECLIPSE Command Center. A single control center can manage up to 20 meters of LED strip per zone.

Is the LED light strip designed to be permanently submerged in water?

No, although the ECLIPSE SNL100 LED light strip is fully waterproof (IP68) and suitable for damp areas, it is not designed to be permanently submerged in water.