Kabel Y do sondy 12-stykowej/4-stykowej podwójny

This Y-cable is designed to connect two Garmin 4-pin transducers to a Garmin device with a 12-pin transducer port. It allows you to extend your sounder system's capabilities by combining data from two transducers.

The Garmin 010-12234-05 Y-cable has a 12-pin main connector for connection to the Garmin device and two 4-pin connectors for transducers.

Using this Y-cable allows you to optimize your sonar system by combining data from two different depth sounders. This can improve sonar coverage and accuracy, providing a more complete underwater view without needing to replace your display or chartplotter.

Yes, cable 010-12234-05 is a genuine Garmin accessory, designed to ensure optimal compatibility and performance with the brand's devices and transducers.

Yes, this cable is designed to allow your Garmin device to receive data from two transducers, which may include different transducer views or frequencies, provided the connected transducers and Garmin device support these technologies (e.g., traditional fishfinder, ClearVü, SideVü).

The product reference is 010-12234-05.

Yes, like all Garmin depth sounder accessories, this Y-cable is designed to withstand marine environmental conditions, ensuring a reliable and durable connection.

Its primary function is to act as an adapter allowing two depth sounders with 4-pin connectors to be plugged simultaneously into a single 12-pin depth port on a compatible Garmin device.

This Y-cable is a passive adapter designed to carry signals from two transducers to a single Garmin combo port. It contains no active electronics for signal processing.

No, this cable is specifically designed as a "Y" adapter to connect two 4-pin transducers to a single 12-pin port. It is not intended to be used as a simple extension cable for a single transducer.

This Y-cable is compatible with Garmin devices featuring a 12-pin transducer port. It includes models such as the echoMAP™ 72sv, 73sv, 74sv, 93sv, 94sv series, as well as the STRIKER™ 7sv, STRIKER™ Plus 7sv, and STRIKER™ Plus 9sv series.

No, this cable is specifically designed for Garmin 4-pin transducers and Garmin 12-pin devices. Compatibility with transducers from other brands is not guaranteed and is not recommended.

No, this cable is specifically designed for Garmin transducers equipped with 4-pin connectors. It is not compatible with 8-pin or 6-pin transducers.

This cable is compatible with Garmin models featuring a 12-pin transducer port. Please verify the connectivity of your specific device. Compatible models include the echoMAP™ 72sv, 73sv, 74sv, 93sv, 94sv, STRIKER™ 7sv, STRIKER™ Plus 7sv, and STRIKER™ Plus 9sv.

The Y-cable itself provides the physical connection. Support for ClearVü and SideVü technologies will depend on the 4-pin transducers you connect and the 12-pin Garmin device to which the cable is plugged in. If your transducers and device are compatible with these technologies, the Y-cable will enable their operation.

No, this cable is designed to connect to a Garmin device with a 12-pin transducer port. It is not compatible with 8-pin ports.

Yes, if both 4-pin transducers you connect are traditional or CHIRP (or one of each), and your 12-pin Garmin device is compatible with these technologies, the Y-cable will allow their simultaneous use.

This cable is compatible with any Garmin device equipped with a 12-pin transducer port. For GPSMAP chartplotters, check if the specific model has this type of transducer port.

For installation, connect the 12-pin connector of the Y-cable to the depth sounder port on your compatible Garmin device. Then, plug each of your two 4-pin transducers into the corresponding connectors on the Y-cable. Ensure all connections are securely fastened.

No, connecting this Y-cable is generally a simple plug-and-play operation that does not require specific tools. The connectors are designed to be plugged and unplugged manually.