LUX SL180, Strip Light, Cut-Seal, 2500mm - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Oszczędź 7%

Garmin

010-04456-00

LUX SL180, taśma LED Cut-Seal, 2500 mm

La bande lumineuse Garmin Lumishore LUX SL180 CRGBW (010-04456-00) de 2500mm est une solution d'éclairage d'ambiance marine IP68, offrant un spectre complet de couleurs RGB et un blanc tunable de 2700 K à 6500 K. Conçue pour une intégration flexible, elle peut être coupée tous les 100 mm pour s'adapter précisément à votre installation.

Elle est livrée avec un kit de scellement (embouts, adhésif silicone) et des clips de fixation, et nécessite un module de pilote Lumishore LUX Strip Light Driver pour fonctionner.

Prix publicBénéficier du tarif pro

735,37 PLN

735,37 PLN ~~797,12 PLN~~

Cena brutto Dostawa obliczana w momencie płatności.

Dostępny

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Typ produktu	Bande lumineuse
Napięcie pracy	23-25V
Typowe zużycie energii	12.5 W
Kolor światła	Multicolore (CRGBW)
Stopień ochrony IP	IP68
Kompatybilny z ściemniaczem	Oui
Tylna strona samoprzylepna	Oui
Compatible Driver Module	Module Driver Lumishore LUX Strip Light
Construction Type	Entièrement encapsulée et potée
Cut Interval Mm	100
Minimum Bend Radius	50
Zużycie energii na metr	5 W/m
Salt Fog Resistance	Oui
Sealing Cure Time	24 heures
Sealing Kit Included	Oui
Odporność na UV	Oui

Description détaillée

Przeznaczona do wymagających środowisk morskich taśma LED Garmin Lumishore LUX SL180 Cut-Seal CRGBW o długości 2500 mm (nr katalogowy 010-04456-00) stanowi wszechstronne rozwiązanie do oświetlenia nastrojowego. Taśma wyposażona jest w technologię CRGBW, która obejmuje diody LED do światła białego zimnego, czerwonego, zielonego, niebieskiego oraz białego ciepłego, umożliwiając uzyskanie pełnego spektrum kolorów RGB oraz regulację temperatury barwowej białego światła od 2700 K do 6500 K. Z gęstością 180 diod CRGBW na metr, zapewnia równomierne i spersonalizowane rozproszenie światła.

Elastyczność i integracja morska

LUX SL180 wyróżnia się możliwością cięcia co 100 mm, co pozwala na dostosowanie do specyficznych przestrzeni pokładu jachtu. Zestaw uszczelniający zawierający końcówki i silikonowy klej jest dołączony, aby zapewnić szczelność ciętych odcinków, utrzymując klasę ochrony IP68. Oznacza to wysoką odporność na kurz oraz tymczasowe zanurzenie, choć produkt nie jest przeznaczony do stałego zanurzenia. Całkowicie zalana i odporna konstrukcja, a także odporność na promieniowanie UV i mgłę solną, czynią ją odpowiednim wyborem do warunków morskich.

Montaż i sterowanie

Montaż taśmy odbywa się za pomocą dołączonych taśm klejących 3M oraz klipsów mocujących. W przypadku instalacji zewnętrznych lub w miejscach narażonych na wilgoć zaleca się stosowanie dodatkowych mocowań mechanicznych. Taśma LED Garmin Lumishore LUX SL180 współpracuje wyłącznie z modułami sterującymi Lumishore LUX Strip Light Driver. Sterowanie oświetleniem może odbywać się za pomocą chwilowego włącznika (z modułem sterującym taśmy), ekranu wielofunkcyjnego (MFD) kompatybilnego z systemem, ekranu Lumishore lub urządzenia inteligentnego, gdy jest podłączona do centrum sterowania EOS-LUX. Zasilana jest napięciem 23–25 V poprzez moduł sterujący Lumishore LUX Strip Light Driver, przy poborze mocy 5 watów na metr. Niski profil (14,5 mm wysokości) umożliwia dyskretną instalację pod pawężami, meblami lub za panelami.

Documentations

Type	Nom
	Notice d'installation - Guide d'installation de la bande lumineuse LUX SL180 (IP68) CRGBW

Avis de l'expert

« Technical analysis of the Garmin Lumishore LUX SL180 CRGBW light strip »

The Garmin Lumishore LUX SL180 Cut-Seal CRGBW LED light strip is a strategic accent lighting solution for boat owners seeking advanced customization of onboard ambiance. Its key feature is the "Cut-Seal" capability, allowing precise adjustment to the desired length in 100 mm increments. This flexibility is critical for custom installations, such as lighting gunwales, skylights, storage compartments, or under furniture, where standard lengths would be unsuitable.

The CRGBW technology integrates cold white, red, green, blue, and tunable warm white (2700 K to 6500 K), offering a far broader lighting palette than basic RGB strips. This enables varied atmospheres, from functional white for night navigation to warm white for relaxed anchoring, or vibrant colors for festive occasions. For installations, the dedicated Lumishore LUX Strip Light Driver module must be used, as connecting to any other system will void the warranty and may compromise functionality.

During installation, special attention must be given to the cutting and sealing process. The provided kit is essential for maintaining IP68 waterproofing; failure to follow sealing instructions will compromise the product’s durability in marine environments. The minimum bending radius of 50 mm on the vertical axis must be strictly observed to prevent damage to the strip. For sections over one meter, a two-person installation is strongly recommended to ensure a straight, twist-free layout. While UV and salt-mist resistant, the strip is not designed for permanent submersion and must be shielded from direct, prolonged exposure to intense sunlight. This product is intended for carefully planned installations requiring minimal marine electrical expertise for driver connection, but delivering high user value for sophisticated, long-lasting ambient lighting.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

LUX SL180, taśma LED Cut-Seal, 2500 mm

735,37 PLN

735,37 PLN ~~797,12 PLN~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the total length of the Garmin LUX SL180 LED light strip?

The Garmin LUX SL180 light bar has a total length of 2500 mm.

What lighting colors are available with this LED strip?

This LED strip uses CRGBW technology, meaning it includes LEDs for cold white, red, green, blue, and warm white. This provides a full RGB color spectrum and adjustable white temperature.

What is the LED density per meter on the LUX SL180 strip?

The LUX SL180 LED light strip is equipped with 180 CRGBW LEDs per meter, ensuring uniform light diffusion.

What is the Ingress Protection (IP) rating of this LED strip light and what does it mean?

The LUX SL180 LED light bar has an IP68 protection rating. This means it offers high resistance to dust and temporary immersion. However, it is not designed for permanent submersion in water.

Is the LUX SL180 LED light bar suitable for marine environments?

Yes, the LED strip is designed for demanding marine environments. Its construction is fully encapsulated and potted, and it is resistant to UV and salt spray.

What is the power consumption of this LED strip?

The power consumption of the LUX SL180 LED light strip is 5 watts per meter.

What is the required input voltage range for this LED strip?

The required input voltage range for the LUX SL180 LED strip is 23 to 25V. It must only be used with Lumishore LUX LED strip driver modules.

Can the LUX SL180 light strip be cut to fit a specific length?

Yes, the LUX SL180 LED strip can be cut every 100 mm to fit your boat's specific spaces. A sealing kit is provided to ensure waterproofing after cutting.

How to seal the cut ends of the LED strip to maintain its waterproofing?

To seal cut ends, you need:

Remove 20 mm of the adhesive backing and lightly mark the adhesive 10 mm from the end. Remove the tape from the marked line to expose the silicone. Fill the supplied nozzle halfway with the silicone adhesive (supplied). Attach the nozzle, clean off any excess adhesive, and let it cure for 24 hours before handling.

How is the LUX SL180 LED strip installed or mounted?

The strip can be installed in several ways:

3M adhesive: A 3M adhesive strip is provided on the back. After cleaning the mounting surface, simply remove the protective layer and press the strip firmly into place. Mounting clips: Mounting clips are included and can be used in addition to the adhesive. Mechanical fasteners: For outdoor installations, wet areas, or tight bends, it is recommended to use mechanical fasteners (screws) every 25 to 30 cm or on either side of a bend.

What is the minimum bending radius allowed for this LED strip?

The LUX SL180 LED light strip has a minimum bending radius of 50 mm on the vertical axis. It is critical not to bend it on the horizontal axis or twist it.

Can I install the LED light strip in areas exposed to direct sunlight?

Although the LED strip is made from UV-resistant material, it must not be installed in areas exposed to direct strong sunlight.

Can the LED light strip be installed in wet areas?

Yes, the LED strip is fully sealed and can be installed indoors or outdoors, including in damp areas. However, it is not designed for permanent submersion in water.

What safety precautions should I take before installing the LED strip?

Before any installation, always ensure the vessel's power source and battery are disconnected or isolated. It is recommended that a qualified professional performs the electrical and mechanical installation.

Are additional mounts required for outdoor installations or tight bends?

Yes, for outdoor installations, wet areas, or tight bends, it is recommended to use mechanical fasteners (clips or screws) in addition to the adhesive layer. These fasteners should be spaced 25 to 30 cm apart and/or placed on each side of a bend.

What type of control module is required to operate the LUX SL180 LED strip?

The LUX SL180 LED strip is designed to be used exclusively with Lumishore LUX LED strip modules. It requires connection to these modules to operate correctly.

Can I use lighting control products or dimmers from other brands with this LED strip?

No, it is imperative not to connect the LUX SL180 LED strip to control products or lighting controllers from other brands. Using third-party controllers will void the product warranty.

What can void the warranty for this LED strip?

The warranty may be voided in the following cases:

Improper use or abuse of the product.
Incorrect or negligent installation.
Damage caused by disasters (fire, flood, lightning, etc.).
Installation by unqualified personnel.
Unauthorized repair or modification.
Unapproved installations or failure to comply with installation, maintenance, and usage instructions specified in the manual.
Use with third-party controllers or any non-Lumishore lighting control product.

What is the adjustable white temperature range for this LED strip?

The LUX SL180 LED strip provides adjustable white temperature ranging from 2700 K (warm white) to 6500 K (cool white).

Which accessories are included for the installation of the LED strip?

For installation, the LED strip comes with 3M adhesive strips, mounting clips, and a sealing kit including end caps and silicone adhesive for cut ends.