LUX SNL180, Superbright Neon Flex Strip Light, 2300mm - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Oszczędź 8%

Garmin

010-04430-00

LUX SNL180, neonowy pasek LED Superbright, 2300 mm

Conçue pour l'éclairage marin, la bande LED Garmin LUX SNL180 de 2300mm offre une illumination CRGBW sans points, avec 180 LEDs/m et une protection IP67. Ce modèle, partie de la gamme Lumishore LUX, nécessite un module pilote Lumishore LUX Strip Light Driver pour son fonctionnement et son contrôle étendu. Elle est fournie avec des clips de fixation en acier inoxydable.

Prix publicBénéficier du tarif pro

850,56 PLN

850,56 PLN ~~929,98 PLN~~

Cena brutto Dostawa obliczana w momencie płatności.

Dostępny

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Typ produktu	Bande LED flexible
Napięcie pracy	24 V
Typowe zużycie energii	11.5 W
Kolor światła	Multicolore (RVB) et Blanc
Stopień ochrony IP	IP67
Kompatybilny z ściemniaczem	Oui
Bending Axis	Latéral uniquement
Can Be Cut	Non
Compatible Driver Required	Lumishore LUX Strip Light Driver Module
Środowisko montażowe	Intérieur ou extérieur, zones humides (non submersible)
Minimum Bend Radius	120
Mounting Method	Clips à visser
Zakres napięcia pracy	23 - 25
Zużycie energii na metr	5
Odporność na UV	Oui
Warranty Period Years	3

Description détaillée

Przeznaczony do morskiego oświetlenia nastrojowego i konturowego, neonowy pasek LED Garmin LUX SNL180 o długości 2300 mm (numer referencyjny 010-04430-00) to elastyczne rozwiązanie zapewniające równomierne oświetlenie bez punktów świetlnych. Model ten zawiera 180 diod LED CRGBW na metr, oferując pełne spektrum kolorów (czerwony, zielony, niebieski) oraz zimne i ciepłe białe światło o regulowanej temperaturze barwowej od 2700K do 6500K. Elastyczna konstrukcja umożliwia montaż wokół zakrzywionych powierzchni, idealny do pawęży, sufitów kabin lub daszków T-top, z minimalnym promieniem gięcia 120 mm (wyłącznie gięcie boczne).

Integracja i parametry techniczne

Pasek LUX SNL180 został zaprojektowany do współpracy wyłącznie z modułami sterującymi Lumishore LUX Strip Light Driver i nie może być podłączany do innych sterowników zewnętrznych. Zależność ta zapewnia optymalną integrację w ekosystemie Lumishore, umożliwiając sterowanie za pomocą chwilowego przełącznika lub, przy zastosowaniu centrali sterującej EOS-LUX, zaawansowaną obsługę poprzez wielofunkcyjne wyświetlacze (MFD), ekrany Lumishore lub urządzenia inteligentne. Każdy metr zużywa 5 watów przy napięciu wejściowym 23–25 V, gwarantując stałą wydajność świetlną i precyzyjne zarządzanie energią.

Trwałość i montaż

Wyprodukowany z materiałów odpornych na promieniowanie UV i poddany testom mgły solnej, pasek LUX SNL180 posiada całkowite zalanie żywicą i stopień ochrony IP67, co czyni go odpowiednim do instalacji wewnętrznych i zewnętrznych, również w strefach wilgotnych, ale nie do zanurzenia ciągłego. Montaż odbywa się za pomocą dostarczonych clipsów ze stali nierdzewnej, zapewniających pewne mocowanie. W przeciwieństwie do standardowych pasków LED, ten model dostarczany jest w fabrycznie ustalonych długościach, zalanych żywicą w celu utrzymania szczelności IP67 i nie może być przycinany.

Documentations

Type	Nom
	Notice d'installation - Guide d'installation Lumière flexible LUX SNL180 2300mm

Avis de l'expert

« CRGBW contour lighting: integrating the LUX SNL180 »

The Garmin LUX SNL180 LED strip represents a differentiated contour lighting option for demanding marine installations. Its primary functional value lies in its ability to produce homogeneous, dot-free CRGBW light, a major aesthetic advantage over traditional LED strips where individual light points may be visible. This feature makes it particularly suitable for creating sophisticated lighting in cockpits, cabin interiors, under coamings, or along side decks, where soft, diffused lighting is desired.

Installing this 2300mm model requires mandatory integration into the Lumishore LUX ecosystem via a Lumishore LUX Strip Light Driver control module. This dependency must be considered during the electrical system design phase, as it involves a deliberate choice for this specific architecture. While physical installation using the supplied clips is straightforward, handling strips of this length (>1m) requires assistance from a second person to avoid twisting or damaging the strip, given its minimum bending radius of 120mm and the prohibition against vertical-axis bending or cutting. Its IP67 rating, UV resistance, and salt spray resistance ensure good durability in marine environments for applications excluding permanent immersion.

The LUX SNL180 is a relevant choice for owners seeking an integrated lighting solution offering full color flexibility and high-end lighting quality. It stands out from more basic LED solutions due to its superior illumination quality and robustness for marine environments, provided the associated Lumishore control system investment is accepted.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

LUX SNL180, neonowy pasek LED Superbright, 2300 mm

850,56 PLN

850,56 PLN ~~929,98 PLN~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the exact length of the GARMIN LUX SNL180 LED strip?

The GARMIN LUX SNL180 light bar has a length of 2300 mm.

What are the color and white temperature options available with this LED strip?

The LUX SNL180 strip integrates 180 CRGBW LEDs per meter, providing a full color spectrum (red, green, blue) as well as cold and warm whites. The color temperature is adjustable from 2700K to 6500K.

Is the GARMIN LUX SNL180 LED light bar waterproof and suitable for outdoor installation?

Yes, the LUX SNL180 strip is fully sealed and has an IP67 protection rating. It can be installed indoors or outdoors, including in damp areas. However, it is not designed for permanent submersion in water.

What type of lighting does the GARMIN LUX SNL180 strip offer?

The LUX SNL180 strip is a flexible neon-style lighting solution designed for marine ambient and contour lighting. It provides uniform illumination without visible hotspots.

What is the power consumption of the LUX SNL180 LED light strip?

Each meter of the LUX SNL180 strip consumes 5 watts. For a 2300mm strip, the total consumption is therefore 11.5 watts.

Is the tape material UV-resistant?

Yes, the flexible neon strip light is made from UV-resistant materials. However, it is recommended not to install it in areas exposed to direct strong sunlight.

What precautions should be taken before starting the installation of the LUX SNL180 strip?

Before any installation, it is essential to ensure that the vessel's power source and battery are disconnected or isolated. It is also recommended that a qualified professional performs the electrical and mechanical installation.

Can I cut the GARMIN LUX SNL180 LED strip to fit a specific length?

No, the flexible neon light strip is supplied in ready-to-use lengths and factory-sealed to meet IP67 standards. Cutting the strip is strictly prohibited, as it would void the waterproofing and warranty.

What is the minimum allowed bend radius for the LUX SNL180 light strip?

The LUX SNL180 LED light strip has a minimum bending radius of 120 mm. It is critical to note that bending must only be performed along the lateral axis. Do not bend it along the vertical axis or twist it.

How is the LUX SNL180 LED strip installed and secured?

The flexible neon strip is installed using the provided stainless steel clips. These clips are screwed into place, then the strip is simply pushed into the clips until a 'click' is heard, confirming secure attachment. It is recommended to use multiple clips around tight bends to ensure proper conformity and prevent lifting.

How to handle the light strip during installation to avoid damaging it?

To avoid damaging the LED strip:

Always carefully unroll it along its entire length; do not lift it by one end only. Do not let it drop or twist during installation. Do not apply excessive pressure. Do not pull, stretch, twist, or bend it vertically. For lengths over 1 meter, it is recommended to use two people for installation.

Is it mandatory to have the LUX SNL180 L-band installed by a professional?

Yes, the installation instructions state that a qualified professional must perform the electrical and mechanical installation of the LUX SNL180 LED strip to ensure correct installation and warranty validity.

Which modules are required to operate the GARMIN LUX SNL180 LED light strip?

The GARMIN LUX SNL180 light bar is specifically designed to operate in conjunction with Lumishore LUX Strip Light Driver modules. It must be connected only to these modules.

Can I use lighting controllers from other brands with the LUX SNL180 strip?

No, the LUX SNL180 LED strip must not be connected to third-party lighting controllers or dimmers. It is designed to operate exclusively with Lumishore LUX Strip Light Driver modules. Using third-party products will void the warranty.

How to control the lighting of the LUX SNL180 strip once installed?

The LUX SNL180 band control can be done in several ways:

Via a momentary switch.By adding an EOS-LUX control unit, advanced management is possible via multifunction displays (MFD), Lumishore screens, or smart devices.

What is the required input voltage range for the LUX SNL180 LED strip?

The LUX SNL180 LED strip requires an input voltage between 23 and 25V. It must only be used with Lumishore LED strip driver modules to ensure correct voltage and proper operation.

What is the warranty duration for the GARMIN LUX SNL180 LED strip?

The GARMIN LUX SNL180 LED light bar is covered by a three-year warranty from the original purchase date against manufacturing defects.

What conditions can void the warranty for the LUX SNL180 LED light strip?

The LUX SNL180 L-band warranty may be voided in the following situations:

Misuse or abuse of the product. Incorrect or negligent installation. Damage caused by disasters (fire, flood, storm, lightning). Installation by unqualified personnel. Unauthorized repair or modification. Unapproved installations or non-compliance with installation, maintenance, and usage guidelines. Use with third-party controllers or pilots not approved by Lumishore.

Is the product supplied with the necessary mounting clips?

Yes, the LED strip comes with the stainless steel clips required for installation. Suitable screws for securing the clips are also required and must be used to ensure full engagement of the clip on the strip.

What type of marine environment is this product designed for?

The GARMIN LUX SNL180 LED strip is specifically designed for marine ambient and contour lighting. Its robust design and IP67 rating make it suitable for indoor and outdoor marine environments, though it should not be permanently submerged.