Obudowa osłonowa do GPSMAP 8410/8610

The Garmin Trim Piece Snap Cover 010-12800-00 trim finish cover is designed to protect and enhance the aesthetics of compatible Garmin marine displays. It replaces lost or damaged trim strips, ensuring a neat finish and protecting the device edges from impacts or wear. This accessory is also used to facilitate the integration of certain Garmin devices into a glass console or other mounting surfaces.

The Garmin Trim Piece Snap Cover 010-12800-00 finish trim is specifically designed for 10-inch GPSMAP chartplotters in the 8x10 series. This includes models such as the GPSMAP 8410, 8410xsv, 8610, and 8610xsv.

No, the Garmin Trim Piece Snap Cover 010-12800-00 finish trim is not a universal part. Each trim reference is dedicated to specific models or screen sizes. This reference is specifically designed for GPSMAP chartplotters in the 8x10 series with 10-inch displays.

The Trim Piece Snap Cover is designed to snap easily around the compatible device's frame. Installation should not require specific tools and typically involves aligning the cover with the screen edges and pressing until it clicks into place.

The Garmin Trim Piece Snap Cover 010-12800-00 trim finish cover is designed to protect the edges of the device from impacts or wear, and to provide a neat finish. It does not cover the screen surface itself, only the frame around the screen.

The primary function of this cover is twofold: it provides aesthetic protection by replacing damaged or missing trim, and it protects the edges of the device. It is also useful for facilitating the visual integration of the device into specific installations such as glass consoles.

No, the Garmin Trim Piece Snap Cover 010-12800-00 finish trim is specifically designed for GPSMAP chartplotters in the 8x10 series (10-inch models). While Garmin finish trims exist for 10-inch ECHOMAP™ Ultra combo chartplotter/fishfinders, they correspond to different part numbers and are not interchangeable with this model.

The part number 010-12800-00 is intended for GPSMAP chartplotters in the 8x10 series with 10-inch displays (such as the GPSMAP 8410, 8410xsv, 8610, 8610xsv). The part number 010-12800-01 is intended for other models, specifically the GPSMAP 8412 or 8612, which are 12-inch devices. Each part number is specific to the display size and model of the device.

The term "Snap Cover" (snap-on cover) implies installation without screws. It is designed to snap directly onto the frame of the compatible device, requiring no additional fasteners.

You may need to replace the end cap if the original part is lost, damaged, broken, or if you simply want to refresh the device's aesthetics. This end cap ensures a neat finish and protects the device's edges.

The product information provided does not specify color variants for the Garmin Trim Piece Snap Cover 010-12800-00. Typically, these accessories are offered in a standard color (often black or dark gray) to match the aesthetics of Garmin devices.

The Garmin Trim Piece Snap Cover 010-12800-00 trim piece is primarily designed to provide aesthetic and physical protection to the edges of the device and to facilitate integration. It is not specified as a component that improves the device's waterproofing, which is ensured by its internal design.

No, this finish frame (part number 010-12800-00) is not compatible with the GPSMAP 8015/8215 MFDs. For these models, a specific replacement bezel is available under part number 010-11986-03, as stated in the product description.

To clean the finish, use a soft, damp cloth with fresh water. Avoid harsh chemicals, solvents, or abrasive cleaners that could damage the material or the part's finish.

Being a "Snap Cover", it is designed to be clipped on and off. It should be possible to remove it carefully by applying slight pressure on the edges to release it without damaging the device or the cover itself.

Yes, the product is identified as a « [GARMIN] Trim Piece Snap Cover » and the brand is Garmin, which indicates it is an original accessory manufactured by Garmin.

Finish trim pieces are typically sold individually, as they are designed to fit a single device. The designation "Trim Piece Snap Cover" in the singular and the price for a single unit confirm that this is an individual part.

Yes, the Garmin Trim Piece Snap Cover 010-12800-00 finishing trim is specifically designed for the GPSMAP 8410xsv, which is part of the 10-inch GPSMAP 8x10 series mentioned as compatible.

The finish trim is mentioned as facilitating the integration of certain Garmin devices into a glass console. It contributes to a clean finish and can help hide the edges of the opening, but the absolute necessity will depend on your console’s exact mounting specifications and the device.

As an accessory designed for Garmin marine displays, the trim cover is manufactured to withstand typical marine environmental conditions, including exposure to salt water and UV, ensuring durability in this environment.