VHF stacjonarna GMDSS GM600

The Icom GM600 VHF is a fixed marine communication station designed to meet the strict requirements of the Global Maritime Distress and Safety System (GMDSS). It provides clear voice communications and includes Digital Selective Calling (DSC) for emergency and routine situations.

Yes, the GM600 VHF holds the MED (Marine Equipment Directive) certification, as well as SOLAS, ITU-R M.493-13 DSC, and IMO A.694(17) certifications. It is therefore fully approved for use on commercial and merchant vessels.

The GM600 VHF offers two transmit power levels: a maximum output of 25 W for long-distance communications, and a reduced output of 1 W for short-range exchanges, saving power and reducing interference.

Yes, the front panel of the VHF GM600 has an IPX7 waterproof rating. This means it is waterproof and can withstand immersion in water up to 1 meter deep for 30 minutes.

The main unit dimensions (excluding protrusions) are 274 mm wide, 114 mm high, and 121.5 mm deep. Ensure sufficient rear clearance for cable routing during installation.

The GM600 fixed VHF weighs approximately 1.6 kg, making it a robust unit suited to demanding marine environments.

The GM600 VHF complies with IEC 61162-1 (NMEA 0183 compatible). It accepts RMC, GGA, GNS, GLL and VTG input sentences to retrieve position data. It outputs DSC and DSE data to other equipment.

Yes, the GM600 VHF is equipped with a Centronics IEEE1284 port. This allows connection of a compatible printer to directly print received ASN (DSC) messages, a common requirement on commercial vessels.

Yes, you can connect an external speaker. The VHF delivers an impressive 10 W audio output under a 4 Ω load for the external speaker, ensuring excellent audibility even in a noisy environment.

The internal speaker of the VHF GM600 provides an audio output power of 2 W, which is generally sufficient for clear listening in the cockpit or helm station.

The GMDSS fixed VHF GM600 is supplied with the HM-214V hand microphone.

The GM600 transmits (Tx) on the frequency range 156.025 to 161.600 MHz and receives (Rx) from 156.025 to 162.000 MHz. It also has a dedicated receiver for continuous monitoring of channel 70 (156.525 MHz).

Although it is designed and certified for SOLAS/GMDSS commercial vessels, the GM600 VHF is fully compatible with recreational boats or offshore yachts seeking a highly reliable communication device.

GPS connection is made via IEC 61162-1 communication ports located at the rear of the device. Simply connect the NMEA 0183 output wires from your GPS to the corresponding inputs on the VHF to provide it with your exact position.

When transmitting at maximum power (25 W), the GM600 VHF consumes approximately 3.3 A. In receive mode, with maximum audio volume, consumption is approximately 2.0 A.

Yes, in compliance with GMDSS standards, the GM600 VHF includes a dedicated Class A DSC (Digital Selective Calling) receiver. It continuously monitors channel 70 (156.525 MHz), even when using another channel for communication.

The HM-214V handheld microphone supplied with the GM600 VHF is designed to withstand harsh marine environments. It perfectly matches the ruggedness of the radio’s waterproof front panel (IPX7).

You need a standard marine VHF antenna (50 Ω impedance) of good quality. To ensure GMDSS performance, it is crucial that the antenna is installed as high as possible and clear of any obstacles.

Yes, the VHF GM600 is designed to be flush-mounted in a console or dashboard. Ensure you respect the cutout dimensions and provide adequate ventilation at the rear of the unit to dissipate heat.