Wyświetlacz EasyView 5

The Mastervolt EasyView 5 is a 4.3-inch touch control and monitoring panel designed to provide an intuitive and centralized user interface within MasterBus networks. It allows you to control, configure, and monitor all connected devices compatible with MasterBus.

The EasyView 5 is equipped with a 4.3-inch capacitive touch color screen. It is designed to be readable in full daylight and offers high contrast with a 16-bit color depth.

Yes, the front face of the EasyView 5 is waterproof and has an IP67 protection rating, making it resistant to water, humidity, and dust.

The EasyView 5 dimensions are 113 mm (height) x 127 mm (width) x 43 mm (depth).

The EasyView 5 weighs 0.315 kg (approximately 0.7 pounds).

The EasyView 5 display supports multiple languages, including:

EnglishDutchGermanSpanishItalianFrenchFinnishSwedishNorwegianDanish

The EasyView 5 comes with the following accessories:

UV protection coverFlush-mount frameMasterBus cable (6 m)MasterBus connector12/24 V connectorFour mounting screws (4x30 mm PH2)Four mounting screws (4x14 mm PH2)

Yes, the EasyView 5 includes an audible alarm and features a notification and alarm log that provides a useful history of events for your system operation.

The EasyView 5 display offers a resolution of 480 x 272 pixels.

Yes, the EasyView 5 allows you to customize favorite pages by adding widgets to display system information or commands according to your preferences. You can create practical pages to control your installation.

The EasyView 5 can operate in an ambient temperature range from -20 °C to 70 °C (or -4 °F to 158 °F).

The EasyView 5 offers three installation options:

Surface mount: in the wall-mounting box. Flush mount: in an opening of 82 x 113 mm. Sandwich mount: for larger openings (> 82 x 113 mm), using the wall box as a clamping element.

The EasyView 5 can be powered in two ways:

Via the MasterBus network: if MasterBus power devices are connected and supplying sufficient power to the network. Via a 12/24 V auxiliary input: through the supplied connector, if MasterBus power is insufficient or absent. The accepted voltage range is 9 to 32 V.

Yes, it is mandatory to insert a 1 A fuse in the positive battery line when connecting the EasyView 5 auxiliary power supply.

To connect the auxiliary power supply to the battery, the recommended cable cross-section is:

Minimum: 1 mm² (18AWG)Maximum: 2.5 mm² (13AWG)

No, the EasyView 5 is not protected against reverse polarity. It is critical to ensure the battery is connected correctly to the device to avoid any damage.

The EasyView 5 is compatible with MasterBus network from Mastervolt. It is designed to ensure communication between different Mastervolt devices and acts as a centralized control panel for all connected MasterBus equipment.

Up to 63 MasterBus-compatible devices can be connected on the same network.

Yes, the EasyView 5 has power supply features for the MasterBus network, provided its auxiliary power is connected to the battery. At least one device on the network must have power supply capabilities.

Mastervolt grants a two-year warranty on the EasyView 5 product from the date of purchase. This warranty is valid provided the product is installed and used in accordance with the instructions in the provided manual.