Sonda brązowa montowana na wylot z wiązką stożkową HIGH CHIRP o kącie 12° CPT-S, kabel 10 m

The HIGH CHIRP technology used by this Raymarine CPT-S transducer delivers highly detailed sonar returns and improved target separation underwater. Unlike DownVision imaging systems, the traditional cone beam of this transducer is optimized for precise fish detection and seabed tracking at various depths.

The 12° angle of this transducer is specifically designed to compensate for the deadrise of your vessel’s hull. This ensures the sonar beam is directed vertically toward the seabed, providing optimal performance and accurate readings, particularly for hulls with moderate deadrise.

This transducer is a through-hull model, meaning it requires drilling the hull of your boat for installation. Raymarine recommends installation by a certified installer to ensure proper implementation and to benefit from the enhanced warranty.

No, it is essential not to cut the transducer cable. Cutting the cable will significantly reduce the fishfinder’s performance, void the product warranty, and invalidate the CE marking. If the cable is cut, it cannot be repaired and must be replaced.

This CPT-S transducer is designed to be compatible with Raymarine CHIRP sounder systems. It generally works with Raymarine multifunction displays (MFD) from the Axiom and Element series, as well as with some Dragonfly models that support CPT-S conical beam transducers.

This transducer is made of bronze for increased durability, particularly suited to demanding marine environments. Bronze is a more robust option than plastic and is recommended for fiberglass or wooden hulls, ensuring better longevity and resistance to the elements.

To maintain your depth sounder's performance, follow these recommendations:

Apply a thin layer of water-based antifouling paint to the transducer to prevent marine growth buildup. Reapply every 6 months or at the start of each season.
Clean the transducer with a soft cloth and mild household detergent.
For stubborn grime, use a non-abrasive cleaning pad, such as a Scotch Brite™ pad, ensuring not to scratch the transducer face.
Warning: Never use ketone-based paint, spray paint, or harsh cleaning solvents like acetone, as they will damage the transducer.

This Raymarine E70340 transducer complies with the applicable European harmonised standards. It meets the requirements of Directive 2013/53/EU for marine equipment and standard EN ISO 8846:2017, ensuring its reliability and safety for marine use.