Sonda plastikowa na tablicę HV-100+ HyperVision (kabel 6 m)

The HV-100+ transducer uses Raymarine's HyperVision™ technology. This technology employs higher frequencies to generate ultra-high-resolution sonar images. It provides detailed views of the seabed and underwater targets, offering superior clarity for identifying structures and fish.

The HV-100+ HyperVision transducer provides access to several advanced sonar view types:

DownVision™: For a detailed view of the area beneath your vessel.SideVision™: For an extended side view of structures and fish around your boat.RealVision™: For realistic 3D imaging of the underwater environment.

The HV-100+ transducer is designed for installation on the transom of your boat. It mounts directly and does not require complex hull drilling, unlike through-hull models. It comes with a 6-meter integrated cable to simplify wiring. It is recommended to follow Raymarine’s installation instructions to ensure optimal performance.

The HV-100+ HyperVision transducer is compatible with Raymarine multifunction displays featuring RealVision or HyperVision technology. It is specifically designed to work with the Raymarine Element series. For other series such as Axiom, a RealVision MAX integrated transducer or a compatible external sonar module may be required depending on the model.

Yes, it is possible to apply antifouling paint to the HV-100+ depth sounder. However, it is essential to use only water-based antifouling paint. Under no circumstances should ketone-based or copper-based antifouling paint be used, as this could damage the transducer and affect its performance. Failure to comply with this requirement may also void the product warranty.

No, it is critical never to test or operate the HV-100+ transducer solely in water. Operating the transducer out of water can cause overheating and irreversibly damage the device.

For installation of the HV-100+ transducer, it is recommended to use only neutral-cure polyurethane sealants of marine grade. It is critical NOT to use sealants containing acetate or silicone, as these substances can damage the plastic components of the transducer.

Yes, the HV-100+ HyperVision transducer is equipped with a temperature sensor. This sensor is typically located at the rear of the transducer and provides water temperature data to your compatible multifunction display.