Adapter sondy zbiornika rezystancyjnej VE.Can

The Victron Energy VE.Can resistive tank probe adapter is designed to enable precise monitoring of tank levels. It integrates standard resistive level probes with the Color Control GX and the VE.Can network, centralizing energy and fluid management in Victron systems.

This adapter can monitor the levels of various fluids, including fuel, fresh water, wastewater, well water, oil, and black water. It is versatile for comprehensive resource management on board.

The adapter is compatible with resistive level sensors compliant with European standards (0-180 Ohm) and American standards (240-30 Ohm). This flexibility allows its use with a wide range of existing sensors.

The VE.Can resistive tank probe adapter provides a measurement accuracy of ±1%. This ensures reliable data for effective fluid level management.

Integration into the VE.Can network is done via standard RJ-45 cables. The adapter has two RJ45 ports for daisy-chaining with other VE.Can devices.

A single VE.Can network can handle up to 16 tanks of the same type, each requiring its own VE.Can resistive tank probe adapter.

The adapter operates over a wide input voltage range, from 9 to 70 VDC, making it compatible with most marine or onboard electrical systems.

The adapter's power consumption is low, less than 50mA. This minimizes its impact on the vessel's electrical system.

Configuration is simplified by two small rotary switches located on the adapter. These switches allow you to assign a tank type (e.g., fuel, fresh water) and a unique number to each adapter without requiring an external display.

Yes, the adapter is specifically designed for seamless integration with the Color Control GX and the VE.Can network, enabling centralized reading of tank levels.

Yes, installing the adapter on a VE.Can network requires using VE.Can terminations at the ends of the network to ensure proper operation and stable communication.

Yes, the adapter is powered directly via the VE.Can network, simplifying wiring and installation.

No, this adapter is specifically designed to work with resistive level sensors. It is not compatible with other types of sensors, such as voltage or current sensors.

The product reference number for this adapter is BPP900600100.

Yes, this adapter is a Victron Energy product, a brand known for its energy management equipment in marine and mobile applications.

No, the adapter configuration does not require any special software or external display. It is done directly on the device using two small rotary switches.

Standard RJ-45 cables required for VE.Can network connection are generally not included with the adapter and must be purchased separately if not already available.

Yes, the adapter can monitor well tank levels, in addition to other fluids such as fuel, fresh water, and wastewater.

Yes, each adapter is individually configured for the type of transducer it connects (European or American). As long as each transducer is connected to its own correctly configured adapter, they can coexist on the same VE.Can network.

Victron Energy products are generally designed for demanding environments. This adapter is intended for use in marine and mobile systems, which implies a certain level of robustness. It is recommended to install it in a dry location, protected from direct water splashes, to maximize its lifespan.