Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 1%

BEP Marine

80-601-0024-00

Ampermetru analogic 0-50 A

L'ampèremètre analogique BEP 0-50A est un instrument de mesure DC à montage sur panneau, idéal pour surveiller le courant de vos circuits batteries et consommations. Il peut être connecté à un, deux ou trois shunts différents (un shunt 50A fourni), permettant de centraliser la surveillance de plusieurs circuits. Ce produit est toujours fabriqué et n'est pas obsolète, mais il est plus basique que les modèles numériques de la marque (comme le BEP Digital Meter).

Prix publicBénéficier du tarif pro

252,00€

252,00€ ~~254,64€~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Destinația produsului	Surveillance du courant continu dans les systèmes électriques marins et industriels
Tip de măsurare	Courant
Subtip de măsurare	Ampérage DC
Tip ecran	Aiguille analogique
Interval de măsurare	0-50A
Interval de măsurare maxim	50A
Unitate de măsură	Ampères (A)
Shunt necesar	Oui
Autoalimentat	Oui
Tip de montaj	Encastré sur panneau
Indice IP	Non spécifié (usage intérieur sec)
Ieșiri alarmă	Non
Articol epuizat	Non
Categorie nivel 0 produs	Monitoring & Interfacing
Categorie nivel 1 produs	Meters
Categorie nivel 2 produs	Meters
Greutatea produsului (g)	350
Shunt Inputs Count	3
Shunt Selection Method	Commutateur intégré

Accessoires

Cablu 10mm² HI FLEX Roșu

4,31€

4,31€ ~~4,78€~~

4,31€ m

Cumpără

Cablu 10mm² HI FLEX Negru

4,31€

4,31€ ~~4,78€~~

4,31€ m

Cumpără

Cablu 16mm² HI FLEX negru

6,55€

6,55€ ~~7,27€~~

6,55€ m

Cumpără

Cablu 16mm² HI FLEX Roșu

6,55€

6,55€ ~~7,27€~~

6,55€ m

Cumpără

Bară omnibus cu 4 bolțuri 500 A

64,58€

64,58€ ~~92,88€~~

Cumpără

Bară omnibus 5 conexiuni 650 A

88,50€

88,50€ ~~118,26€~~

Cumpără

Comutator baterie 2 bancuri paralele BEP 400 A continu 1/1&2/Paralel/Off 48 V

81,53€

81,53€ ~~112,20€~~

Cumpără

Întrerupător de izolare baterie pentru utilizare intensivă 600 A 48 V

73,75€

73,75€ ~~98,28€~~

Cumpără

Interrupteur de batterie série m 300A rouge unipolaire - m-Series Mini On-Off Battery Switch with Knob - Red

Întrerupător de baterie serie m 300 A roșu unipolar

37,82€

37,82€ ~~46,43€~~

Cumpără

Description détaillée

Ampermetrul analogic BEP 0-50A (ref. 80-601-0024-00) este un instrument de măsură montat pe panou, proiectat pentru sisteme electrice DC marine și industriale. Permite citirea directă și fiabilă a curentului până la 50 amperi, fără a necesita alimentare externă. Acest model se distinge prin capacitatea de a fi conectat la unul, două sau trei shunturi diferite, selectabile printr-un comutator integrat, oferind flexibilitate în monitorizarea mai multor circuite dintr-un singur punct de control.

Versatilitate și integrare în sistem

Spre deosebire de ampermetrele digitale mai noi din gama BEP (cum ar fi modelele din seria Digital Meter), acest model analogic oferă avantajul unei citiri instantanee și fără întârziere, ideal pentru monitorizarea variațiilor rapide de sarcină. Instrumentul este furnizat cu un shunt de 50A, dar poate fi utilizat cu shunturi de calibru diferit (neincluse) pentru a extinde intervalul de măsurare sau pentru a monitoriza circuite separate. Această caracteristică îl face deosebit de potrivit pentru instalarea pe un tablou electric principal unde se dorește centralizarea monitorizării curenților bateriei, încărcării și consumului.

Construcție robustă pentru mediu marin

Proiectat și fabricat în Noua Zeelandă de către BEP Marine, acest ampermetru beneficiază de o construcție robustă adaptată condițiilor marine. Carcasa sa pentru montare încastrată se integrează curat în tablourile electrice standard. Este livrat cu un șablon de găurire pentru ușurința instalării. Deși dimensiunile sale sunt apropiate de cele ale modelelor din seria SBH (Splashproof Battery Hub), nu împărtășește indicele de etanșeitate IP66, fiind destinat utilizării în interior sau într-un compartiment tehnic uscat.

Documentations

Type	Nom
	EN - Technical Sheet - PAN METER ANA AMMETER 0-50AMP
	EN - Dimensional Sheet - PAN METER ANA AMMETER 0-50AMP
	EN - Wiring Instructions - PAN METER ANA AMMETER 0-50AMP
	EN - Mounting Template - PAN METER ANA AMMETER 0-50AMP

Avis de l'expert

Pol CONIN

Responsabil digital

« A robust and versatile analog ammeter for DC monitoring »

The BEP 0-50A analog ammeter is a reliable and proven tool for monitoring DC currents on board. Its main advantage lies in its ability to operate with up to three different shunts, selectable via a switch. This allows, for example, monitoring the charging current of the battery bank, the consumption of the engine circuit, and that of the service circuit from a single instrument. It is an elegant solution for centralizing information without multiplying gauges. The absence of active electronics makes it insensitive to power failures and electrical noise, ensuring readings in all circumstances. However, note that this is not a waterproof product; it must be installed in a dry electrical panel, protected from splashes.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Ampermetru analogic 0-50 A

252,00€

252,00€ ~~254,64€~~

Complétez votre installation avec des

Équipements complémentaires

Panou de gestion a bateriei cu 16 întrerupătoare unipolare

BEP Marine

Panou de gestion a bateriei cu 16 întrerupătoare unipolare

Ref : 800-MS3

1.277,96€

1.277,96€ ~~1.824,00€~~

Tablou 8 întrerupătoare unipolare orizontale 12V

BEP Marine

Tablou 8 întrerupătoare unipolare orizontale 12V

Ref : AD063

316,12€

316,12€ ~~442,56€~~

Panneau de disjoncteur Contura 4 positions - Water Resistant Circuit Breaker Panel 4 Position-Black

Blue Sea Systems

Panou de siguranțe Contura 4 poziții

Ref : 8372-BSS

177,65€

177,65€ ~~198,96€~~

Panneau de disjoncteur Contura 8 positions - Water Resistant Circuit Breaker Panel 8 Position-Black

Blue Sea Systems

Panou de siguranțe Contura 8 poziții

Ref : 8371-BSS

307,55€

307,55€ ~~339,72€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What type of current is this ammeter designed to measure?

This ammeter is specifically designed to measure direct current (DC).

What is the measurement range of this analog ammeter?

This ammeter has a measurement range from 0 to 50 amperes (0-50A).

Is this a digital or analog ammeter?

This is an analog ammeter, meaning it displays current measurement via a needle on a graduated dial.

What is included in the pack for this ammeter?

The ammeter is supplied with a shunt.

Is this ammeter suitable for marine environment use?

Yes, this ammeter is from BEP, a brand known for its marine electrical equipment products, and is designed for panel mounting in nautical applications.

What is the brand of this ammeter?

This ammeter is a product from the BEP brand.

What is the mounting type for this ammeter?

This ammeter is designed for panel mounting, making it ideal for integration into dashboards or electrical panels.

Is it necessary to use a shunt for the installation of this ammeter?

Yes, a shunt is absolutely necessary for this ammeter to measure current. A shunt is in fact included with the device.

How to connect the ammeter to the shunt?

The ammeter connects to the shunt via measurement wires. The shunt must be inserted in series in the circuit whose current you wish to measure. The ammeter then measures the small voltage drop across the shunt.

Where should the shunt be installed in the electrical circuit?

The shunt must be installed in series with the load or current source you wish to monitor. It is important to position it so that all the current to be measured passes through it.

Does this ammeter require an external power supply to operate?

An analog ammeter of this type generally does not require external power for its basic measurement function, as it uses the voltage drop across the shunt. If the device includes a backlight, a separate power supply (often 12V DC) would be required for that function only, but this is not specified for this model.

What are the required cut-out dimensions for panel mounting?

The exact cutout dimensions for panel mounting are provided in the product-specific installation documentation. Refer to this document to ensure correct installation.

Can this ammeter be used to monitor battery charge or discharge?

Yes, by correctly installing the shunt in the battery's charging or discharging circuit, this ammeter can be used to monitor the current entering or leaving the battery.

Is it compatible with 24V DC electrical systems?

The ammeter itself, which measures the voltage drop across the shunt, is generally compatible with 24V DC systems as long as the shunt is correctly sized for the maximum current. However, if the device has a backlight requiring power, this may be limited to 12V DC, requiring a converter if the system is 24V. This information is not specified for this model.

What are the typical applications for this marine ammeter?

This ammeter is ideal for monitoring DC current in various marine applications, such as power consumption of electrical equipment, battery charging from solar panels or alternators, and battery discharge.

Is the wiring for this ammeter complex?

Installing and wiring an ammeter with a shunt requires a solid understanding of electrical principles and safety. It is recommended to hire a professional or carefully follow the wiring instructions provided in the manual to avoid any damage or risk.