Cablu pentru shunt contor numeric 10 m

This cable is designed to connect a BEP digital meter to a current shunt. It transmits the shunt's voltage signals to the meter, enabling precise current measurement in a marine electrical system.

The BEP 600-DCM-10M cable has a length of 10 meters.

This cable is specifically designed for use with digital meter shunts, which are typically used for measuring direct current (DC) in marine systems.

The cable transmits a low-voltage signal, which is the voltage drop generated by the current passing through the shunt. This signal is then interpreted by the digital meter to display the current value.

This is a signal cable, not a power cable. It is designed to carry low-voltage measurement data, not high electrical current to power devices.

Yes, like most BEP products, this cable is designed to withstand the demanding conditions of the marine environment, including humidity and vibrations.

A digital meter shunt is a precision component used to measure high electric currents. It creates a small voltage drop proportional to the current flowing through it, which the digital meter uses to display the current value.

Being a "cable kit", it is usually supplied with pre-installed connectors suitable for digital meters and BEP shunts for easy and reliable installation.

Signal cables of this type are often shielded to minimize electromagnetic interference and ensure measurement accuracy, although the exact shielding specifications are not detailed here.

This cable is specifically designed to be compatible with BEP digital meters that require a connection to a current shunt. It is recommended to check your BEP meter documentation to confirm compatibility.

The cable is compatible with BEP current shunt meters designed for use with the brand's digital meters. It is advisable to consult your BEP equipment manuals to ensure proper compatibility.

Although the cable is designed for BEP equipment, its use with third-party brands is not guaranteed and may not function properly due to differences in connectors or signal specifications. Use with non-BEP products is not recommended.

No, the BEP 600-DCM-10M cable is designed for digital meter shunts (typically DC), whereas the 600-ACSM series monitors are AC system monitors that use current transformers (CT) for measurement, not DC shunts.

No, this cable is specifically designed to connect a shunt to a digital meter. Tank probes (BEP) use different cables and specific signal conversion modules (such as the 600-TLM-SIF) for their operation.

Cutting a pre-terminated signal cable like this one is generally not recommended, as it could compromise signal integrity and void the product warranty. If a shorter length is required, it is better to manage excess cable appropriately or choose a shorter cable version if available.

Installing this cable typically does not require specialized tools beyond basic cable routing and securing tools for a boat, as it comes with pre-installed connectors.

It is recommended to route signal cables away from high-current power cables to avoid interference. Ensure the cable is securely fastened and protected against abrasion or physical damage in the marine environment.

The cable has specific connectors that plug into the designated ports on the BEP digital meter and the current shunt. It is important to follow the instructions provided with your meter and shunt to ensure a correct and secure connection.

BEP signal cables are generally designed with color codes or markings to facilitate wire identification and ensure correct, error-free installation, although the exact details of the markings are not specified here.