Disjunctor cu borne filetate și rearmare exclusiv prin buton - 5 A

The "Reset Only" function means the circuit breaker can only be manually reset after tripping due to an overload. It cannot be used as an on/off switch to manually control the circuit. Its sole purpose is to protect the circuit and allow reset after correcting the fault.

This Blue Sea 2130-BSS circuit breaker is rated for 5 amperes. It is designed to handle continuous current up to 5 A without tripping and will trip if the current exceeds this value to protect the circuit.

This circuit breaker is equipped with screw terminals, which facilitate a direct and secure electrical connection. It is designed to be integrated into secondary panels or distribution boxes, allowing for a fixed and reliable installation.

This 5-amp circuit breaker is specifically designed for low-current circuits. It is ideal for protecting auxiliary equipment such as LED lighting, small navigation instruments, or USB chargers on board your boat.

This circuit breaker provides thermal protection. It is designed to detect overcurrents caused by overload or short circuit, and to automatically cut off the circuit to prevent equipment damage and fire hazards.

One of the main advantages of this circuit breaker over fuses is its immediate reset capability. In case of tripping, simply press the button to restore the circuit after correcting the fault, without needing to replace a component as is required with a fuse.

No, this circuit breaker is a 5-amp model and is specifically designed for low-current circuits. For higher loads and more demanding environments, Blue Sea’s magneto-hydraulic circuit breakers from the 187 or 285 series are generally more suitable.

No, this circuit breaker is of the "Reset Only" type and its primary function is to protect the circuit against overcurrents. It should not be used as a main switch to turn equipment on or off, as it is not designed for frequent manual switching.