Disjunctor cu pârghie serie A alb - unipolar 10 A

This circuit breaker is designed to protect marine electrical circuits from damage caused by overcurrent and short circuits. It automatically interrupts the current flow when the intensity exceeds 10 amperes or in the event of a short circuit, and can be reset manually.

This circuit breaker is ideal for protecting low to medium intensity circuits on board, such as cabin lighting, small electronic devices (USB chargers, radios), bilge pumps, or other equipment requiring 10 amp protection.

Yes, this circuit breaker is an excellent resettable alternative to traditional fuses. In case of tripping due to overload or short circuit, simply flip the switch to reset the circuit, eliminating the need to replace a blown fuse.

Yes, this circuit breaker is specifically designed by Carling Technologies, INC. for the marine environment. Its construction and materials are selected to withstand the harsh conditions encountered aboard a vessel, including humidity and vibrations.

Yes, this circuit breaker complies with the European Low Voltage Directive 73/23/EEC and 93/68/EEC. It also meets the EN 60934 product safety standard for equipment circuit breakers and is CE marked, ensuring its suitability for European standards.

The CE marking indicates that the product complies with the essential requirements of applicable European directives regarding safety, public health, and consumer protection. For this circuit breaker, this includes compliance with the Low Voltage Directive.

This circuit breaker is primarily designed and specified for 32 Volt DC (direct current) marine applications, which is common for electrical systems on board boats. If you intend to use it with alternating current (AC), you must verify the detailed specifications provided by the manufacturer for this specific model to confirm compatibility with your circuit's AC voltage and current type.

Blue Sea Systems Series A circuit breakers are designed to operate across a wide temperature range, typically from -40°C to +85°C. This ensures their reliability in various marine weather conditions.

Designed for the marine environment, this circuit breaker is generally splash-resistant on its front face when properly installed in a panel. However, it is not designed to be submerged or exposed to direct and powerful water jets.

This circuit breaker does not require specific regular maintenance. It is designed to be reliable and maintenance-free. However, it is recommended to ensure that electrical connections remain clean and secure and that there are no visible physical damages.

This 10 A circuit breaker is intended for protecting charging circuits and devices connected to the battery, but it is generally not used as the main protection directly at the output of a high-capacity battery. For protecting battery banks or starting circuits, higher-capacity circuit breakers or battery isolators are often required.

A single-pole circuit breaker, like this model, protects and interrupts current on a single conductor (usually the positive) in a circuit. A double-pole circuit breaker protects and interrupts current simultaneously on two conductors (for example, the positive and negative, or the phase and neutral in AC), which is necessary to fully isolate a circuit.

When the circuit breaker trips due to an overload or short circuit, the switch lever automatically moves to a mid-position or "off" (stop) position. Simply reset it manually by moving the lever to the "on" (start) position after resolving the cause of the trip.

Yes, with its 32 Volts DC capacity, this circuit breaker is perfectly suited to protect electrical circuits operating at 12 Volts DC and 24 Volts DC, which are the most common voltages in marine applications.

Blue Sea Systems' Series A circuit breakers, manufactured by Carling Technologies, are typically built with robust, heat-resistant thermoplastic materials designed for durability and safety in marine environments.