Mufă pentru întrerupător cu resetare prin buton-pulsator - Transparentă

The BLUE SEA 4135-BSS transparent circuit breaker boot is designed to protect push-button reset circuit breakers in marine environments. It shields the reset mechanism from water, salt spray, dust, and UV rays, thereby extending the lifespan and reliability of your electrical equipment.

The transparent design of the 4135-BSS boot allows for quick visual inspection of the circuit breaker's condition without requiring disassembly. This facilitates rapid diagnosis and preventive maintenance of electrical systems while providing physical protection against the elements.

No, this boot is specifically sized for BLUE SEA Systems push-button reset circuit breakers. It ensures optimal compatibility and waterproofing with these models.

Installing the boot generally involves sliding it over the reset button of the circuit breaker and securing it. For panel-mounted circuit breakers, the boot is often positioned before tightening the mounting nut of the circuit breaker, ensuring proper retention and effective protection. It is recommended to ensure the power supply is cut off before any handling.

Boot 4135-BSS protects the circuit breaker reset mechanism from water (splashes and spray), salt humidity, dust, and ultraviolet (UV) rays. These protections are essential for electrical equipment used in marine environments.

Yes, the BLUE SEA 4135-BSS clear boot is designed to resist UV rays, which is critical for equipment exposed to sunlight in a marine environment. This helps prevent material degradation and maintains its clarity and protective effectiveness over time.

No, the BLUE SEA 4135-BSS boot is specifically designed for push-button reset circuit breakers. Its shape and dimensions are not suitable for lever or toggle circuit breakers.

Installing the boot usually requires no specific tools beyond those that may be needed for the initial breaker assembly (such as a wrench for the mounting nut). The boot simply slides onto the button and is held in place by the breaker's design and its mounting.

No, the 4135-BSS boot is designed to provide protection against splashes, water spray, and moisture. It is not intended to make the circuit breaker watertight in case of total immersion.

Yes, by covering the reset button, the boot helps prevent accidental activations or deactivations caused by unintended contact or light impacts, while still allowing intentional manipulation.

For optimal sealing, ensure the boot is correctly positioned over the button and that the circuit breaker is properly installed and tightened, if applicable, so that the boot forms an effective seal with the panel or the circuit breaker body. The boot is designed to fit precisely on compatible BLUE SEA circuit breakers.

Although the boot is designed to resist UV and marine conditions, prolonged and extreme exposure may, over time, slightly affect the transparency of any plastic material. However, its design is optimized to minimize this phenomenon and maintain visibility for as long as possible.

No, although Klixon series circuit breakers may offer similar protections, the BLUE SEA 4135-BSS boot is specifically sized for BLUE SEA Systems push-button models, ensuring optimal compatibility and sealing with them.

The boot is designed to be flexible and should not significantly affect the operation or tactile feel of the reset button. It allows normal pressure to activate or reset the circuit breaker while providing protection.

Yes, the boot is designed to be removed if necessary, for example for maintenance of the circuit breaker or its replacement. It is not permanently fixed, but it stays in place once correctly installed.

Yes, the boot is designed for the marine environment, which includes resistance to fresh water and saltwater humidity. Its composition effectively protects against the corrosive effects of salt.

No, the BLUE SEA 4135-BSS circuit breaker block is a protection accessory sold separately. The push-button reset circuit breaker is not included with the block.

Yes, it is strongly recommended to cut the power supply to the relevant circuit before installing or removing the circuit breaker bundle. This is an essential safety measure when working on any electrical components.