ECLIPSE Flood Light 18", Flood Light 18" - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 8%

Garmin

010-04460-00

ECLIPSE, proiector flood de 18 țoli

Conçu pour l'éclairage de pont sur divers types de bateaux (plage de tension de 10.5 à 31 VDC), le projecteur Garmin ECLIPSE Flood Light 18" offre un éclairage de pont haute intensité avec 10 000 lumens et un faisceau large de 70-90 degrés. Faisant partie de la gamme Lumishore ECLIPSE, il est doté d'un corps en aluminium IP68 et permet un contrôle polyvalent via MFD, appareil intelligent ou interrupteur. Les accessoires inclus sont des boulons M6, écrous à insert en nylon et rondelles.

Prix publicBénéficier du tarif pro

838,39€

838,39€ ~~919,99€~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tipul produsului	Projecteur de pont
Tipul instalației	Montage sur étrier
Interval de tensiune de funcționare	10.5-31 VDC
Consum electric tipic	110 W
Flux luminos	10000.0
Temperatură culoare	5000.0
Culoare lumină	Blanc
Material carcasă	Aluminium thermolaqué
Culoare / finisaj	Noir
Indice IP	IP68
Variator compatibil	Oui
Fascicul orientabil	Oui
Bracket Hole Diameter	6.5
Cable Gland Recommended	Oui
Cable Hole Diameter	7
Compatible Control Unit	ECLIPSE Command Center, EOS-LUX Command Center
Control Method	Interrupteur On/Off,Interrupteur momentané,MFD (Écran multifonction),Appareil intelligent
Control Unit Voltage Compatibility	12V uniquement
Tip de fixare	M6
Led Power Per Unit	10
Lens Finish	Dépolie
Light Effects	Stroboscope,Gradation
Max Current Consumption 12v	9.2
Max Current Consumption 24v	4.6
Max Lights Per Control Module	16
Mounting Surface Requirement	Plate et durable
Number Of Leds	12
Lungime (mm)	186
Supplied Fasteners	Boulons M6, écrous à insert en nylon
Tightening Torque	5
Washer Material	Nylon
Wiring Standard	ABYC

Description détaillée

Proiectorul Garmin ECLIPSE Flood Light 18" este conceput pentru iluminatul suprafeței, făcând parte din gama Lumishore® ECLIPSE și oferind o soluție de iluminat de înaltă intensitate pentru mediile marine. Acest model de 18 țoli este echipat cu 12 LED-uri de 10 W, care furnizează până la 10 000 lumeni, cu o temperatură de culoare de 5000 K și un unghi de fascicul larg de 70 până la 90 de grade.

Integrare și Control Versatil

Proiectorul ECLIPSE Flood Light 18" funcționează pe o plajă de tensiune de la 10,5 la 31 VCC, cu un consum maxim de 9,2 A la 12 V (4,6 A la 24 V) pentru o putere medie de 110 W. Oferă opțiuni de control flexibile: printr-un simplu întrerupător pornire/oprire, un întrerupător momentan, un ecran multifuncțional (MFD) compatibil sau un dispozitiv inteligent. Integrarea într-un sistem MFD sau într-un dispozitiv inteligent necesită adăugarea unui ECLIPSE Command Center sau a unui EOS-LUX Command Center, permițând efecte luminoase dinamice precum stroboscopul și modul de reglare a intensității luminoase (dimming).

Construcție Rezistentă și Instalare Simplificată

Cu un grad de protecție IP68, proiectorul Garmin ECLIPSE Flood Light 18" este rezistent la praf și la imersiune, datorită corpului din aluminiu termolacuit și lentilei mate. Designul său articulat și discret facilitează montajul exterior pe diverse structuri ale ambarcațiunii, cum ar fi acoperișurile cabinei, T-top-urile, arcele, pupa sau picioarele radarului. Ideal pentru iluminatul punții pe diferite tipuri de ambarcațiuni, în special cele echipate cu sisteme de 12 sau 24 de volți (plajă de tensiune de la 10,5 la 31 VCC), se distinge față de modelele mai mici, precum Flood Light 4" din aceeași gamă, prin puterea sa crescută, păstrând în același timp avantajele unei instalări simplificate datorită driverelor integrate. Montajul se realizează cu șuruburile M6, piulițele cu insert din nailon și șaibele furnizate, cu un cuplu de strângere de 5 Nm. Produsul beneficiază de o garanție de 3 ani.

Documentations

Type	Nom
	Notice d'installation - Manuel d'installation Projecteur ECLIPSE Flood Light 18" (EN)
	Notice d'installation - Manuel d'installation Projecteur ECLIPSE Flood Light 4" (EN)

Avis de l'expert

« Technical analysis of the Garmin ECLIPSE 18" floodlight for 12V/24V boats »

The Garmin ECLIPSE Flood Light 18" floodlight is a strategic deck lighting solution for recreational boat owners, particularly those with 12V or 24V electrical systems (operating voltage range: 10.5 to 31 VDC). Its 10,000-lumen output, while significant for this category, should be considered for applications requiring extensive deck or cockpit coverage or enhanced safety lighting.

The key advantage of this model lies in its control flexibility. While a basic switch suffices for simple operation, integration with an ECLIPSE Command Center enables advanced control via MFD or smartphone, unlocking dynamic features. It is critical to note that the Command Center is designed specifically for 12V installations. For 24V systems, control options remain available via a LUX Light Control Module or a basic switch. Physical installation is simplified by an articulated design and provided M6 fasteners, but special attention must be paid to cable gland sealing—using a cable gland is strongly recommended to maintain marine-grade installation integrity.

This floodlight positions itself as a more powerful alternative to the 4" models in the ECLIPSE range, offering higher light output without complicating integration thanks to built-in drivers. Its low profile ensures a discreet appearance once mounted. However, for larger vessels or applications requiring coordinated underwater lighting systems via platforms like Lumishore EOS-LUX, more sophisticated solutions or additional control modules may be necessary.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

ECLIPSE, proiector flood de 18 țoli

838,39€

838,39€ ~~919,99€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What are the main lighting features of the Garmin ECLIPSE Flood Light 18" ?

The Garmin ECLIPSE Flood Light 18" spotlight is equipped with 12 x 10 W LEDs, delivering up to 10,000 lumens. It provides a 5000 K color temperature and a wide beam angle of 70 to 90 degrees.

What is the required input voltage range for the ECLIPSE Flood Light 18" spotlight?

This spotlight operates within a voltage range of 10.5 to 31 VDC.

What is the maximum power consumption of the ECLIPSE Flood Light 18" spotlight?

The maximum power consumption of the spotlight is 9.2A at 12V and 4.6A at 24V, for an average power output of 110 W.

How can I control the Garmin ECLIPSE Flood Light 18" spotlight?

The spotlight can be controlled in several ways:

Via a simple on/off switch.Via a momentary switch.Using a compatible multifunction display (MFD).With a smart device.For control via MFD or smart device, adding an ECLIPSE Command Center or an EOS-LUX Command Center is required.

What dynamic lighting effects are available with this spotlight?

Once integrated into an MFD system or smart device via a Command Center, the projector can provide dynamic lighting effects such as strobe and dimming mode.

Is the ECLIPSE Flood Light 18" water and dust resistant?

Yes, this spotlight has an IP68 protection rating, making it resistant to dust and immersion.

What materials is the projector housing made of?

The projector housing is made of powder-coated aluminum and features a frosted lens.

What are the requirements for the mounting location of the spotlight?

The mounting location must be a flat and durable surface.

What type of mounting is used to install the spotlight and what is the required hole size?

The mounting bracket uses a 6.5mm hole sized for an M6 bolt (included). A 7mm hole is also required for cable routing.

What is the recommended torque for the projector mounting fasteners?

The spotlight must be secured to the mounts with a tightening torque of 5Nm. It is important not to overtighten.

Is it necessary to use a qualified electrician for the installation of the floodlight?

Yes, this product must be installed, inspected, and maintained only by a qualified electrician in accordance with all applicable electrical codes.

How should the cable entry's watertightness be ensured?

The cable entry must be made watertight. Using a cable gland is recommended.

Can I control the spotlight with a simple on/off switch?

Yes, the spotlight can operate with a simple on/off switch (latching switch).

If I use a latching switch, how can I activate dimming?

To activate dimming with a rocker switch:

Turn the switch on to power the light at full brightness.
Toggle the switch once to start the dimming cycle.
Toggle the switch again to pause the dimming cycle.
Turn the switch off for 5 seconds to restart at full brightness.

Is the ECLIPSE Command Center compatible with all boat electrical systems?

No, the ECLIPSE Command Center installation is only suitable for 12V boats.

How to clean and maintain the ECLIPSE Flood Light 18" spotlight?

Use only water and soap with a soft cloth to clean the projector. Do not use any chemical cleaners and do not clean under pressure. Regular inspection of the projector must be carried out.

What is the warranty duration for the ECLIPSE Flood Light 18" spotlight?

LUMISHORE Ltd guarantees its lighting systems, including lights and associated accessories, against manufacturing defects for a period of three years from the original purchase date.

What situations can void the projector's warranty?

The warranty may be voided in case of misuse, abuse, incorrect installation, neglect, improper shipping, damage caused by disasters (fire, flood, storm, lightning), installation by unqualified personnel, unauthorized repair or modification, or unapproved installations. Failure to comply with installation guidelines, maintenance instructions, and usage directions also voids the warranty.

Which accessories are required to control multiple lights via an MFD?

To control multiple lights via an MFD, you will need an LUX Light Control Module and an EOS-LUX Command Center.

How to install and connect the Garmin ECLIPSE Flood Light 18-inch spotlight?

Installation of the Garmin ECLIPSE Flood Light 18-inch must be performed by a qualified electrician in accordance with all applicable electrical codes. It is imperative to ensure the power supply is cut off before and during installation and maintenance.

Physical installation steps:
Location selection: Choose a flat and durable mounting location.
Drilling mounting holes: Use an appropriate drill bit to drill the support holes. The bracket has a 6.5 mm hole suitable for an M6 bolt (supplied).
Cable routing: Drill a 7 mm (0.275 inch) hole for the cable. The cable must always be in a "fixed" position without movement or rotation. The cable entry must be sealed; using a cable gland is recommended.
Securing the brackets: Secure the brackets in place using the supplied M6 bolts and nylon insert nuts. Apply the appropriate torque based on the fasteners used and the mounting surface.
Mounting the light: Mount the ECLIPSE light onto the brackets using the supplied M6 bolt, washers, and nylon insert nut. Ensure the nylon washers are placed inside the stainless steel bracket. Tighten to 5 Nm torque, WITHOUT OVER-TIGHTENING.
Wiring and testing: Wiring must be done according to ABYC guidelines. The light operates on a voltage range of 10 to 31 VDC.

Simple control (toggle switch):
Turn the switch on to power the light at full brightness.
Press the switch once to start the dimming cycle.
Press the switch again to stop the dimming cycle.
Turn the switch off for 5 seconds to restart at full brightness.
Control via multifunction display (MFD): To control via MFD, you will need an ECLIPSE Command Center or an EOS-LUX Command Center.
With an ECLIPSE Command Center (12V boats only): Connect the ECLIPSE wiring harness (RED) to the RED of the FL18", the YELLOW to the YELLOW of the FL18", and the WHITE and BLUE to the BLACK of the FL18".
For multiple lights with an ECLIPSE Command Center, connect the RED of each FL18" to +10.5-15V (with individual fuse), the BLACK of each FL18" to ground, and the YELLOW of the ECLIPSE harness to the YELLOW of each FL18".
With a LUX Light Control Module and EOS-LUX Command Center: This system allows control of up to 16 lights. Operation is via a momentary switch: press to turn on, hold to adjust intensity, press to turn off.
It is crucial to always cut the power supply before any intervention and ensure all connections are watertight to guarantee product safety and performance.