ECLIPSE SL100, Strip Light, 1M - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 12%

Garmin

010-04537-00

ECLIPSE SL100, bandă luminoasă, 1 m

Conçue pour l'éclairage marin, la bande lumineuse Lumishore ECLIPSE SL100, commercialisée par Garmin, de 1 mètre offre une solution flexible et discrète avec 60 LED par mètre. Résistante aux UV et certifiée IP68, elle fonctionne en 12V DC et peut être coupée à longueur pour une intégration parfaite. Ce modèle SL100 (SKU 010-04537-00) est une bande lumineuse RGB de la gamme ECLIPSE de Lumishore, commercialisée par Garmin, et compatible avec les systèmes de contrôle Garmin.

Le produit inclut un kit de scellement et silicone, des bandes adhésives, et des clips de fixation.

Prix publicBénéficier du tarif pro

34,97€

34,97€ ~~40,00€~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tipul produsului	Ruban lumineux
Tensiune de funcționare	10-15V
Consum electric tipic	6 W
Indice IP	IP68
Variator compatibil	Oui
Lungime bandă	1.0
Densitate LED-uri / metru	60.0
Spate adeziv	Oui
Bend Axis Restriction	Vertical uniquement
Current Draw Typical Per Meter	0.41 A/m
Installation Environment Suitability	Intérieur, Extérieur, Zones humides, Submersion temporaire
Material	Matériau résistant aux UV
Max Strip Length Per Control Zone	20
Min Bend Radius Vertical	50
Tip de montaj	Adhésif, Clips de fixation
Power Consumption Typical Per Meter	5 W/m
Tip alimentare	DC
Compatibilitate cu tensiunea sistemului	12V DC uniquement

Description détaillée

Banda luminoasă Lumishore ECLIPSE SL100, comercializată de Garmin, de 1 metru este o soluție de iluminat marin flexibilă, concepută pentru integrare discretă și efecte decorative la bord. Cu o densitate de 60 LED-uri pe metru, oferă iluminare indirectă pentru pavăzi, sub mobilier sau în spatele panourilor de plafon.

Versatilitate și durabilitate marină

Această bandă luminoasă ECLIPSE SL100 este complet încapsulată și fabricată dintr-un material rezistent la UV, asigurând o protecție IP68 împotriva prafului și a imersiei temporare. Suportă o curbură minimă de 50 mm pe axa verticală, facilitând adaptarea la contururile ambarcațiunilor, spre deosebire de soluțiile mai rigide. Dimensiunile compacte de 10,8 mm x 5,2 mm permit o integrare aproape invizibilă. Deși robustă pentru zonele umede, nu este proiectată pentru imersie permanentă.

Instalare și control avansat

Instalarea benzii ECLIPSE SL100 este facilitată de benzi adezive și cleme de fixare furnizate, cu recomandarea de a utiliza fixări mecanice suplimentare pentru instalațiile exterioare sau în zone umede. Banda poate fi tăiată la lungimea dorită în punctele marcate și sigilată cu ajutorul kitului și a siliconului inclus. Controlul se realizează printr-un întrerupător simplu pentru versiunile monocrom sau bicolore. Pentru versiunile RGB (acest model este RGB), este necesar un ECLIPSE Command Center, care oferă gestionare avansată printr-un ecran multifuncțional Garmin sau un dispozitiv inteligent. Gama ECLIPSE SL100 propune și lungimi de 2,5 și 5 metri pentru diverse nevoi de iluminat.

Documentations

Type	Nom
	Notice d'installation - Guide d'installation pour bande lumineuse ECLIPSE SL100 (1 mètre) (EN)

Avis de l'expert

« Technical analysis of the Lumishore ECLIPSE SL100 1M light strip (Garmin) »

The Lumishore ECLIPSE SL100 LED light strip, marketed by Garmin, is a relevant option for boat owners looking to integrate subtle ambient or functional lighting. Its flexibility, with a 50mm vertical bending radius, makes it ideal for following hull curves or interior layouts where rigid fixtures would not fit. It is critical to respect this bending constraint and avoid twisting it to ensure longevity.

Installation is simplified by the pre-applied adhesive, but for demanding marine environments or vibration-prone areas, adding the supplied mounting clips is highly recommended for durable mechanical retention. The ability to cut to length and seal with the included kit provides valuable adaptability for custom projects. However, this sealing step must be performed carefully to maintain IP68 waterproofing.

This type of lighting is particularly suited to recreational boats, sailboats, and motorboats for applications such as indirect cockpit lighting, highlighting steps, or storage lighting. Its 12V DC operation is standard for most marine installations. RGB versions (this model, SKU 010-04537-00, is RGB) require an ECLIPSE Command Center, positioning these light strips as components of a Garmin integrated lighting system offering centralized control and advanced customization options.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

ECLIPSE SL100, bandă luminoasă, 1 m

34,97€

34,97€ ~~40,00€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the length of this Garmin ECLIPSE SL100 LED strip?

The Garmin ECLIPSE SL100 light bar has a length of one meter (1M).

What is the required supply voltage for the ECLIPSE SL100 LED strip?

This LED strip operates exclusively on direct current (DC) in 12V systems. The accepted voltage range is 10 to 15V DC.

Can I install the ECLIPSE SL100 LED strip outdoors on my boat?

Yes, the ECLIPSE SL100 LED light strip is fully encapsulated and made from UV-resistant material, making it suitable for indoor or outdoor installation. However, it must not be installed in areas exposed to direct sunlight.

Is the ECLIPSE SL100 LED light bar waterproof?

Yes, it offers IP68 protection against dust and temporary immersion. It is designed for wet areas but is not intended for permanent submersion in water.

What is the power consumption of the ECLIPSE SL100 LED strip per meter?

Typical power consumption for this LED strip is 6 Watts per meter, which corresponds to a current draw of 0.5A at 12V.

What are the physical dimensions of the ECLIPSE SL100 light strip?

The compact dimensions of the light strip are 10.8 mm in width by 5.2 mm in height, allowing for nearly invisible integration.

How can I mount the ECLIPSE SL100 LED light strip?

Installation is made easier by the adhesive strips and mounting clips provided. For outdoor installations in wet areas or with tight bend radii, it is recommended to use additional mechanical fasteners in addition to the adhesive.

What is the minimum curvature allowed for the light strip?

The light strip supports a minimum curvature of 50mm (approximately 1.968 inches) on the vertical axis only. It is important not to bend it on the horizontal axis or twist it.

Can the ECLIPSE SL100 LED light strip be cut to the desired length?

Yes, the LED strip can be cut. Locate the marked cut points, then use a pair of scissors to cut the strip in a single motion at the center of the cut marks.

What happens if I do not properly seal the cut end of the light strip?

It is critical to properly seal the cut end. Failure to do so could compromise the waterproof properties of the assembly and risk voiding the product warranty.

What type of lighting does the ECLIPSE SL100 strip provide?

The ECLIPSE SL100 LED strip provides indirect lighting, ideal for coamings, under furniture or behind ceiling panels, creating decorative effects on board.

How many LEDs are there per meter on this LED strip?

The ECLIPSE SL100 LED light strip is equipped with a density of 60 LEDs per meter.

Can I connect the ECLIPSE SL100 LED strip to an AC power supply?

No, this LED strip is designed to operate only with 12V DC systems. Never connect it to a voltage outside the 10-15V DC range or directly to AC power.

Is it necessary to hire a professional for installation?

A qualified professional should install the ECLIPSE SL100 LED strip light’s electrical and mechanical components.

How to prepare the surface before bonding the LED strip?

Before installation, thoroughly clean the mounting surface with isopropyl alcohol (IPA) to ensure it is free of dust and dirt.

How to seal the cut end of the LED strip?

To seal the end, remove 20mm of the adhesive backing, then lightly mark the adhesive 10mm from the end. Peel off the tape to expose the silicone. Fill the end cap halfway with the supplied silicone adhesive, then fit the cap and wipe off excess. Allow to cure for 24 hours.

Can I bend the ECLIPSE SL100 light strip to fit complex shapes?

No, the light strip must not be twisted or bent along the horizontal axis. It is only designed to curve along the vertical axis with a minimum radius of 50mm.

Is the ECLIPSE SL100 light bar compatible with an ECLIPSE Command Center controller?

Yes, the ECLIPSE SL100 LED strips (whether single-color, dual-color, or RGB) can be used with an ECLIPSE Command Center. However, it is important not to mix different types of lights (single-color, dual-color, RGB) on the same Command Center zone output.