ECLIPSE SL100, Strip Light, Blue, 5m - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 13%

Garmin

010-04479-00

ECLIPSE SL100, bandă luminoasă albastră, 5 m

Le bandeau lumineux flexible Garmin ECLIPSE SL100 bleu de 5m est une solution d'éclairage marin IP68 conçue pour l'ambiance et la décoration. Résistant aux UV et opérant sous 12V DC, il est idéal pour une intégration discrète dans divers espaces. Ce modèle fait partie de la collection ECLIPSE et est fourni avec des fixations à vis et un tube de silicone pour le scellement.

Prix publicBénéficier du tarif pro

130,04€

130,04€ ~~149,99€~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tipul produsului	Bandeau lumineux
Tensiune de funcționare	12V
Consum electric tipic	5 W/m
Culoare lumină	Bleu
Indice IP	IP68
Variator compatibil	Oui
Lungime bandă	5.0
Densitate LED-uri / metru	60.0
Spate adeziv	Oui
Bend Axis Restriction	Courbure uniquement verticale, pas d'axe horizontal ni de torsion
Current Consumption Per Meter	0.41A @ 12V
Encapsulation Type	Entièrement encapsulé et 'potted'
Mediu instalare	Intérieur, Extérieur, Zones humides
Min Bend Radius Vertical	50
Operating Voltage Range Precise	10-15V DC
Grosime bandă	5.2
Lățime bandă	12.0
Compatibilitate cu sistemul	Interrupteur simple, ECLIPSE Command Center
Rezistență UV	Oui

Description détaillée

Conceput pentru iluminatul ambiental și decorativ la bordul navelor, banda luminoasă ECLIPSE SL100 de la Garmin este o soluție de iluminat flexibilă de 5 metri, în culoare albastră. Integrat în colecția ECLIPSE, acest bandă oferă o iluminare indirectă și discretă pentru pavaje, sub mobilier sau în spatele panourilor de plafon, deosebindu-se de sistemele de iluminat funcțional precum luminile de navigație sau proiectoarele.

Concepție și Specificații Tehnice

Modelul SL100 dispune de 60 LED-uri pe metru, asigurând o lumină albastră constantă pe întreaga sa lungime de 5 metri. Funcționează exclusiv la o tensiune continuă de 12V, cu o plajă operațională de 10 până la 15V DC. Consumul tipic este de aproximativ 5 wați pe metru, cu un curent de 0,41A sub 12V. Concepția este integral încapsulată și "potted", asigurând o robustețe marină. Cu o secțiune transversală de 10,8 mm x 5,2 mm, acest bandă este fabricat dintr-un material rezistent la UV, deși se recomandă evitarea unei expuneri directe prelungite la soare. Indicele de protecție IP68 garantează o rezistență ridicată la praf și apă, permițând instalarea în zone umede, însă nu este conceput pentru imersie permanentă.

Instalare și Flexibilitate

Banda luminoasă ECLIPSE SL100 suportă un raz de curbură minim de 50 mm pe axa verticală, permițând adaptarea la contururile bărcii. Nu trebuie îndoită pe axa orizontală și nici răsucită. Instalarea electrică este simplificată prin cablaj cu 2 fire pentru modelul monocrom. Banda poate fi tăiată la lungimea dorită, însă capătul tăiat trebuie sigilat obligatoriu cu siliconul furnizat pentru menținerea etanșeității. Montarea se realizează prin intermediul unei benzi adezive 3M și a unor cleme cu șurub (furnizate), sau a unor cleme din oțel inoxidabil opționale, asigurând o fixare mecanică sigură, recomandată în mod special pentru instalațiile exterioare sau în zonele supuse la curbură strânsă.

Control și Integrare

Controlul SL100 poate fi realizat printr-un simplu întrerupător pornire/oprire. Face parte din colecția ECLIPSE de la Garmin, o gamă de produse de iluminat marin dezvoltată de Lumishore și comercializată de Garmin, asigurând o coerență estetică și tehnică în cadrul unei instalații marine. Produsul beneficiază de o garanție de 3 ani.

Documentations

Type	Nom
	Notice d'installation - Guide d'installation de la bande lumineuse Garmin Eclipse SL100 (EN)

Avis de l'expert

« Technical analysis of the Garmin ECLIPSE SL100 light strip »

The Garmin ECLIPSE SL100 LED light bar is a relevant solution for integrating ambient or decorative lighting on a variety of vessels, from cruising sailboats to dayboats. Its flexibility and ability to be cut to length allow for high adaptability in applications such as indirect lighting under coachroofs, along side decks, or to highlight interior and exterior architectural features.

The electrical installation is straightforward for this monochrome version, with a 2-wire connection to a 12V circuit. The ability to cut the light bar to the required length is a major advantage, offering precise customization. However, it is critical to follow the procedure for sealing the cut end with the provided silicone to maintain the IP68 rating and ensure product durability in a marine environment. Using the adhesive tape in combination with the screw clips is strongly recommended, especially in areas exposed to moisture or vibrations, to ensure a secure and lasting fixture.

This model is a reliable option for accent lighting, standing out from generic solutions with its marine-grade IP68 design and UV resistance. It is not, however, suitable for use as a primary light source or for continuous immersion. Its minimum bending radius of 50 mm on the vertical axis must be considered during installation planning to avoid damaging the light bar with excessive bending, including on the horizontal axis.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

ECLIPSE SL100, bandă luminoasă albastră, 5 m

130,04€

130,04€ ~~149,99€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the color of this LED strip?

The Garmin ECLIPSE SL100 LED strip emits a blue light. It is designed for ambient and decorative lighting.

What is the total length of the ECLIPSE SL100 LED strip?

The ECLIPSE SL100 LED strip has a total length of 5 meters.

Is the Garmin ECLIPSE SL100 backlight strip waterproof?

Yes, the ECLIPSE SL100 LED strip is fully encapsulated and has an IP68 protection rating. This means it is highly resistant to dust and water, allowing installation in damp areas.

However, it is not designed for permanent submersion in water.

What is the power consumption of this LED strip light?

The typical power consumption of the ECLIPSE SL100 LED strip is approximately 5 watts per meter.

The current draw is approximately 0.41 amperes at 12V DC.

How many LEDs are there per meter on the ECLIPSE SL100 LED strip?

The ECLIPSE SL100 LED strip features 60 LEDs per meter, providing consistent blue light along its entire length.

What is the Eclipse SL100 light bar used for?

The ECLIPSE SL100 LED strip light is designed for ambient and decorative lighting aboard vessels. It is ideal for indirect and discreet illumination of gunwales, under furniture, or behind ceiling panels.

Is the LED strip UV-resistant?

Yes, the ECLIPSE SL100 LED strip is made from UV-resistant material. However, prolonged direct sun exposure should be avoided to preserve its durability.

Can the light strip be used in very humid areas or outdoors?

Yes, thanks to its IP68 protection rating and fully sealed design, the LED strip can be installed in damp areas or outdoors.

However, it is not designed for continuous immersion in water.

What is the minimum bending radius for installing the LED strip?

The ECLIPSE SL100 LED strip has a minimum bending radius of 50 mm along the vertical axis. It is critical not to bend it along the horizontal axis or twist it to avoid damaging the product.

What precautions should be taken when installing the LED strip light?

During installation, it is important to:

Ensure the vessel's power source is disconnected or isolated.Handle the strip carefully by unrolling it gently from the reel.Do not apply pressure on the LEDs, only on the edges of the strip.Do not pull, stretch, twist, or bend the strip along its horizontal axis.Use two people for lengths over one meter.Lay the strip flat and straight.

Is it necessary to disconnect the boat's power source before installation?

Yes, it is imperative to always ensure that the vessel's power source and the battery are disconnected or isolated before proceeding with the installation of the light strip. This safety measure is essential.

How to wire the ECLIPSE SL100 LED strip?

The ECLIPSE SL100 LED light bar is a single-color model. For simple connection, it can be wired to an on/off switch. The red wire of the light bar connects to the positive (with an appropriate fuse) of the 12V DC power supply, and the black wire connects to the negative, potentially via the switch.

For integration with an ECLIPSE Command Center, refer to the Command Center installation manual, but for a single-color light bar, the ECLIPSE red cable harness connects to the red wire of the light bar, and the blue and white wires of the harness connect to the black wire of the light bar.

What power supply voltage is required for the Garmin ECLIPSE SL100 LED strip?

The Garmin ECLIPSE SL100 LED light bar is designed to operate exclusively with boats powered by 12V DC. Its operating range is 10 to 15V DC. It must not be connected to voltages outside this range or directly to AC power.

Is the LED strip compatible with ECLIPSE Command Center control systems?

Yes, the ECLIPSE SL100 LED strip is compatible with ECLIPSE Command Center control systems. For a complete installation and control via the Command Center, consult the specific Command Center installation manual.

Can the LED strip be connected to an AC power supply?

No, the ECLIPSE SL100 LED strip is designed to operate only with a 12V direct current (DC) power supply. It must never be connected directly to an alternating current (AC) power source.

What is the length of this ECLIPSE SL100 LED light strip?

This part number corresponds to a Garmin ECLIPSE SL100 LED light strip 5 m long. The available length must be accounted for during installation planning to avoid tight bends and stressed cable sections.

In which direction can the LED strip be bent?

Technical data indicates curvature only in the vertical plane, with a minimum radius of 50 mm. Do not force the tape into torsion or bend it along the horizontal axis, as this may damage the encapsulation or the LEDs.

Is this ribbon compatible with the ECLIPSE Command Center control?

Yes, Nexus indicates compatibility with a single switch and with the ECLIPSE Command Center. For a scalable installation, you must provide the wiring and electrical protections corresponding to the selected control method.

What power supply is required for the ECLIPSE SL100?

This tape operates on 12 V DC, with a specified range of 10 to 15 V DC. The circuit must be protected according to the installed length and no connection should be made to an AC power supply.

Can the ECLIPSE SL100 be installed outdoors?

Yes, Nexus data indicates indoor, outdoor, and wet area use, with IP68 rating and UV resistance. Final durability depends mainly on surface preparation, bonding, and mechanical protection of the wiring.