ECLIPSE SNL100, Neon Flex Light, Blue and White, 5m - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 10%

Garmin

010-04497-00

ECLIPSE SNL100, bandă Neon Flex albastru și alb, 5 m

Le Garmin ECLIPSE SNL100 est un ruban lumineux flexible de 5 mètres, offrant un éclairage LED bleu et blanc sans points visibles, idéal pour une intégration discrète en milieu marin. Conçu pour les installations intérieures et extérieures, il bénéficie d'une protection IP68 et est fabriqué en matériau résistant aux UV, assurant une durabilité sur les systèmes 12V. Faisant partie de la collection ECLIPSE, il peut être coupé tous les 25 mm et contrôlé via interrupteur ou, pour des fonctions avancées, via un ECLIPSE Command Center. La boîte inclut la bande lumineuse ECLIPSE SNL100, un kit de scellement avec embouts, et un pack de clips de fixation.

Prix publicBénéficier du tarif pro

223,75€

223,75€ ~~250,00€~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tipul produsului	Ruban lumineux LED
Consum electric tipic	30W
Temperatură culoare	5000.0
Culoare lumină	Bleu et Blanc
Indice IP	IP68
Fascicul orientabil	Non
Culoare / finisaj	Blanc
Material carcasă	Silicone résistant aux UV
Tipul instalației	Montage en surface
Comutator integrat	Non
Interval de tensiune de funcționare	10-15V

Description détaillée

Proiectat pentru iluminatul marin versatil, banda flexibilă de LED ECLIPSE SNL100 de la Garmin, în versiunea albastru și alb de 5 metri, oferă o soluție de iluminat fără puncte vizibile. Inclusă în colecția ECLIPSE, această variantă este adaptată pentru instalări interioare și exterioare, inclusiv în zone umede, datorită designului complet etanș (IP68).

Caracteristici tehnice și performanță

Modelul SNL100 se remarcă prin flexibilitatea sa, permițând urmărirea contururilor și suprafețelor curbate ale ambarcațiunilor. Integrează 60 LED-uri pe metru, asigurând o iluminare dublă în albastru și alb (5000K pentru alb). Funcționează pe sisteme de 12V CC (interval 10-15V CC), cu un consum maxim de 0,5 A/metru și o putere medie de 6 W/metru. Materialul său rezistent la UV garantează durabilitate în medii marine. Spre deosebire de iluminările fixe sau rigide, SNL100 permite o integrare discretă și personalizată de-a lungul pavăzelor, sub hard-top-uri sau în cabine.

Instalare și flexibilitate

Această bandă de 5 metri poate fi tăiată la fiecare 25 mm, oferind o adaptare precisă la spațiul de instalare. Fiecare capăt tăiat trebuie sigilat cu kitul de silicon furnizat pentru a menține etanșeitatea. Raza minimă de curbură este de 120 mm pe axa verticală, permițând adaptarea la suprafețe curbate fără a deteriora banda LED internă. Instalarea electrică este simplificată prin cablaj cu 3 fire pentru modelul bicolor. Controlul poate fi realizat printr-un întrerupător, un MFD compatibil sau un dispozitiv inteligent, necesitând utilizarea unui ECLIPSE Command Center pentru ultimele două opțiuni. Pentru instalări complexe sau scenarii de iluminat dinamic, ECLIPSE Command Center, deși nu este inclus, permite exploatarea integrală a capacităților produselor din gama ECLIPSE, inclusiv gestionarea zonelor de iluminat sau integrarea cu alte accesorii ECLIPSE.

Documentations

Type	Nom
	Notice d'installation - Guide d'installation ECLIPSE SNL100 Neon Flex (EN)

Avis de l'expert

« Flexible and waterproof marine ambient lighting for discreet integration »

The Garmin ECLIPSE SNL100 LED light strip is a particularly relevant supplementary lighting solution for marine installations requiring discreet visual integration and high environmental protection. Its IP68 rating, combined with UV-resistant materials, makes it a reliable choice for areas exposed to spray or splashes, such as coamings, T-top undersides, or cockpit side decks. It is crucial to note, however, that it is not designed for permanent submersion, which must be considered during installation planning.

The practical value of this SNL100 lies in its ability to provide indirect and uniform lighting, without the point-light characteristics of classic LED strips. Its flexibility, with a minimum bending radius of 120 mm on the vertical axis, allows it to follow the complex curves of hulls or superstructures where rigid fixtures would be unsuitable. This feature makes it ideal for creating ambient lighting or marking zones without disrupting the boat's overall aesthetics. It is best suited for medium to large boats seeking customization of ambient lighting.

Regarding installation, while the 3-wire wiring for the bicolor model is relatively straightforward, the ability to cut the strip every 25 mm requires careful sealing of the ends using the provided silicone kit. Failure to do so can compromise waterproofing and product durability. Using two people is recommended for lengths over 1 meter to avoid twists or kinks. For advanced control, particularly via an MFD or mobile app, integration with an ECLIPSE Command Center is essential, adding complexity and additional cost to the system but greatly expanding lighting management possibilities. Without this control center, the SNL100 functions as a simple bicolor strip controlled by an on/off/on switch. It is imperative not to wire the blue and white channels to activate simultaneously via a single switch; instead, use a three-position switch (blue/off/white) or the ECLIPSE Command Center.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

ECLIPSE SNL100, bandă Neon Flex albastru și alb, 5 m

223,75€

223,75€ ~~250,00€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the Garmin ECLIPSE SNL100 light strip?

The Garmin ECLIPSE SNL100 is a flexible "Neon Flex" type light strip designed for marine lighting. It provides LED illumination without visible hotspots and is suitable for indoor and outdoor installations on boats, including in wet areas.

What lighting colors are available for this LED strip model?

This specific model of the ECLIPSE SNL100 LED light strip offers dual illumination in blue and white colors.

What is the total length of the ECLIPSE SNL100 LED light strip?

The Garmin ECLIPSE SNL100 LED strip has a total length of 5 meters.

Is the ECLIPSE SNL100 LED light bar UV-resistant?

Yes, the ECLIPSE SNL100 LED light strip is made from UV-resistant material, ensuring durability in a marine environment. However, it should not be installed in areas exposed to direct strong sunlight.

How many LEDs per meter does the ECLIPSE SNL100 LED strip have?

The ECLIPSE SNL100 LED light strip integrates 60 LEDs per meter, providing uniform and seamless lighting.

What is the color temperature of the white lighting on the LED strip?

The white lighting provided by the ECLIPSE SNL100 LED strip has a color temperature of 5000K, corresponding to a cold, bright white.

What is the power consumption and average power per meter for this LED strip?

The ECLIPSE SNL100 LED light strip has a maximum consumption of 0.5 A per meter and an average power of approximately 5 Watts per meter for each channel (blue or white).

Can this LED strip be installed outdoors or in wet areas on a boat?

Yes, the ECLIPSE SNL100 tape is fully waterproof (IP68) and designed for installation both indoors and outdoors, including in damp areas of a vessel. However, it is not designed for continuous submersion in water.

Can I cut the ECLIPSE SNL100 LED strip to the desired length?

Yes, the LED strip can be cut every 25 mm to fit the installation space precisely. Cut marks are printed on the strip to make this operation easier.

How to ensure waterproofing after cutting the LED strip?

After cutting the tape to the desired length, each cut end must be sealed with the supplied silicone kit. It is recommended to follow the detailed steps in the installation guide to ensure proper waterproofing and prevent LED discoloration.

What important precautions should I take before installing the LED strip?

Before any installation, ensure the boat's power source and battery are disconnected or isolated. It is also recommended that a qualified professional performs the electrical and mechanical installation. Do not unroll the tape by pulling on one end and avoid twisting it or applying excessive pressure.

What is the minimum bending radius of the ECLIPSE SNL100 LED light strip?

The ECLIPSE SNL100 LED strip has a minimum bending radius of 120 mm (4.724 inches) along the vertical axis. It must not be bent along the horizontal axis or twisted to avoid damaging the internal LED strip.

Is it possible to turn on the blue and white channels simultaneously on this two-color LED strip?

No, it is important not to wire the blue and white channels to light up simultaneously. The strip is designed to use one channel at a time, via an On/Off/On switch or a compatible controller.

What are the dimensions of the ECLIPSE SNL100 light strip profile?

The ECLIPSE SNL100 LED strip has a width of 16 mm and a height of 22 mm. These dimensions are critical when planning its integration along the contours of your vessel.

Is it necessary to hire a professional to install this LED strip light?

It is strongly recommended that a qualified professional carry out the electrical and mechanical installation of the ECLIPSE SNL100 LED strip to ensure correct and safe implementation, and compliance with maritime standards.

Where should I NOT install the ECLIPSE SNL100 LED strip?

Although the tape is UV-resistant, it must not be installed in areas exposed to strong direct sunlight. Additionally, it is not designed to be permanently submerged in water, despite its IP68 waterproof rating.

What is the required supply voltage for the ECLIPSE SNL100 LED strip?

The ECLIPSE SNL100 LED light strip is designed to operate exclusively with 12V DC boat systems. It can function within a voltage range of 10 to 15V DC.

Is the LED light strip compatible with AC power systems?

No, the ECLIPSE SNL100 LED light strip is not compatible with AC power systems. It must be connected only to a 12V direct current (DC) source.

Can the LED strip be connected to an ECLIPSE Command Center?

Yes, the ECLIPSE SNL100 light strip can be connected and controlled via an ECLIPSE Command Center. A single control center can manage up to 20 meters of light strip per zone.

Is the LED light strip designed to be permanently submerged in water?

No, although the ECLIPSE SNL100 LED light strip is fully waterproof (IP68) and suitable for damp areas, it is not designed for continuous submersion in water.